[Wed Sep 28 06:56:40 2011] Detection parameters:
  Position = (242.9, 519.3) = 1 3 41.07 -22 13 51.7
  Extent = 0.6" x 0.5", rotation angle = 80 degrees
  Source counts = 31.7 +/- 5.8
  Background counts = 2.3
  Rate = 0.0005 +/- 8e-05

[Wed Sep 28 06:56:41 2011] Off-axis axis estimate = 2.90'
[Wed Sep 28 07:58:40 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 07:58:40 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Wed Sep 28 07:58:40 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.119
[Wed Sep 28 07:58:40 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.56"
[Wed Sep 28 08:14:17 2011] fullrun_ccd3_acisf13451_pi14-548_cl_pass0_src6.ximg exists
[Wed Sep 28 08:14:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13451_pi14-548_cl_pass0_src6.csv
[Wed Sep 28 08:14:17 2011] fullrun_ccd3_acisf13451_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Sep 28 08:14:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13451_pi14-548_cl_pass0_src6.csv
[Wed Sep 28 08:14:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13451_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13451_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:14:17 2011] fullrun_ccd3_acisf13451_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Sep 28 08:14:17 2011] fullrun_ccd3_acisf13451_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Sep 28 08:14:17 2011] Fit fullrun_ccd3_acisf13451_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Sep 28 08:14:29 2011] Spatial fit model total counts = 32.836900, observed total counts = 35.000000
[Wed Sep 28 08:14:29 2011] Offset between fit and detection position for source 11 = 0.260991 pixels
[Wed Sep 28 08:14:29 2011] 34.161150 total counts/ 8.198950 bgd. counts: snr = 9.066974
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.260991 pixels
  Position = (243.1, 519.3) = 1 3 41.08 -22 13 51.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 26.0 +/- 5.8
  Background counts = 8.2
  Rate = 0.0004 +/- 8e-05
[Wed Sep 28 08:14:29 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:14:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:14:29 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:14:29 2011] Source does appear to be extended
[Wed Sep 28 08:14:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 09:14:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 09:14:44 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Sep 28 09:14:44 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.871
[Wed Sep 28 09:14:44 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.40"
[Wed Sep 28 09:30:12 2011] fullrun_ccd3_acisf13451_pi14-548_cl_pass1_src6.ximg exists
[Wed Sep 28 09:30:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13451_pi14-548_cl_pass1_src6.csv
[Wed Sep 28 09:30:12 2011] fullrun_ccd3_acisf13451_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Sep 28 09:30:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13451_pi14-548_cl_pass1_src6.csv
[Wed Sep 28 09:30:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13451_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13451_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 09:30:12 2011] fullrun_ccd3_acisf13451_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Sep 28 09:30:12 2011] fullrun_ccd3_acisf13451_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Sep 28 09:30:12 2011] Fit fullrun_ccd3_acisf13451_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Sep 28 09:30:22 2011] Spatial fit model total counts = 34.062100, observed total counts = 35.000000
[Wed Sep 28 09:30:22 2011] Offset between fit and detection position for source 11 = 0.012682 pixels
[Wed Sep 28 09:30:22 2011] 35.293190 total counts/ 8.379390 bgd. counts: snr = 9.297556
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.012682 pixels
  Position = (243.1, 519.3) = 1 3 41.08 -22 13 51.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 26.9 +/- 5.9
  Background counts = 8.4
  Rate = 0.0004 +/- 8e-05
[Wed Sep 28 09:30:22 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 09:30:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 09:30:22 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 09:30:22 2011] Source does appear to be extended
[Wed Sep 28 09:30:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 10:00:26 2011] Writing source region out to fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11_src.reg
[Wed Sep 28 10:00:26 2011] Extracting stamp from image fullrun_ccd3_acisf13451_pi14-548_cl_sm2.00.img.gz, (225, 501) - (261, 538)
[Wed Sep 28 10:00:26 2011] Writing fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11.gif
[Wed Sep 28 10:03:33 2011] Size of ../../acisf13451/products/events/fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11_src.evt.gz[events] = 29 counts
[Wed Sep 28 10:03:33 2011] Mean chipx,y = (1002.07, 659.90)
[Wed Sep 28 10:03:33 2011] Mean tdetx,y = (4472.10, 4063.07)
[Wed Sep 28 10:03:33 2011] chipx,y range = (989.00-1021.00, 643.00-678.00)
[Wed Sep 28 10:03:33 2011] Size of ../../acisf13451/products/events/fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 5 counts
[Wed Sep 28 10:03:34 2011] Not generating rmf since there are only 26 counts
[Wed Sep 28 10:03:34 2011] arf not found, will run specextract
[Wed Sep 28 10:04:04 2011] ../../acisf13451/products/spectra/fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11.warf not found
[Wed Sep 28 10:04:04 2011] ../../acisf13451/products/spectra/fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11.wrmf not found
[Wed Sep 28 10:04:04 2011] Removal of ../../acisf13451/products/spectra/fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11.soff failed
[Wed Sep 28 10:12:00 2011] Spectrum 11 has only 27 counts, deleting rmf
[Wed Sep 28 10:12:00 2011] 198.183
[Wed Sep 28 10:13:11 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:13:11 2011] Error reading totcts from fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Sep 28 10:13:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:13:11 2011] Using photon index=1.80, rate=0.000384, arf fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11.arf
[Wed Sep 28 10:13:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 10:13:11 2011] Updating source flux to 4.6e-15
[Wed Sep 28 10:13:38 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 10:13:39 2011] acisf13451/analysis//spectral/fullrun_ccd3_acisf13451_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete