[Wed Sep 28 06:55:24 2011] Detection parameters:
  Position = (724.6, 1068.7) = 1 3 52.38 -22 14 50.0
  Extent = 0.5" x 0.5", rotation angle = 48 degrees
  Source counts = 19.0 +/- 4.5
  Background counts = 1.0
  Rate = 0.0003 +/- 6e-05

[Wed Sep 28 06:55:24 2011] Off-axis axis estimate = 3.60'
[Wed Sep 28 07:17:41 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 07:17:41 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Wed Sep 28 07:17:41 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.043
[Wed Sep 28 07:17:41 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.72"
[Wed Sep 28 07:41:20 2011] fullrun_ccd1_acisf13451_pi14-548_cl_pass0_src11.ximg exists
[Wed Sep 28 07:41:20 2011] fullrun_ccd1_acisf13451_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Sep 28 07:41:20 2011] Fit fullrun_ccd1_acisf13451_pi14-548_cl_pass0_src11 appears to have run properly
[Wed Sep 28 07:41:20 2011] fullrun_ccd1_acisf13451_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Sep 28 07:41:20 2011] fullrun_ccd1_acisf13451_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Sep 28 07:41:20 2011] Fit fullrun_ccd1_acisf13451_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Sep 28 08:14:26 2011] Spatial fit model total counts = 19.690100, observed total counts = 20.000000
[Wed Sep 28 08:14:26 2011] Offset between fit and detection position for source 3 = 0.784636 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.784636 pixels
  Position = (725.1, 1069.3) = 1 3 52.38 -22 14 50.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 19.7 +/- 4.4
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Wed Sep 28 08:14:26 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:14:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:14:26 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:14:26 2011] Source does appear to be extended
[Wed Sep 28 08:14:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 08:34:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 08:34:21 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Sep 28 08:34:21 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.974
[Wed Sep 28 08:34:21 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.62"
[Wed Sep 28 08:58:26 2011] fullrun_ccd1_acisf13451_pi14-548_cl_pass1_src11.ximg exists
[Wed Sep 28 08:58:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13451_pi14-548_cl_pass1_src11.csv
[Wed Sep 28 08:58:26 2011] fullrun_ccd1_acisf13451_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Sep 28 08:58:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13451_pi14-548_cl_pass1_src11.csv
[Wed Sep 28 08:58:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13451_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13451_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:58:26 2011] fullrun_ccd1_acisf13451_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Sep 28 08:58:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13451_pi14-548_cl_pass1_tfrozen_src11.csv
[Wed Sep 28 08:58:26 2011] fullrun_ccd1_acisf13451_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Sep 28 08:58:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13451_pi14-548_cl_pass1_tfrozen_src11.csv
[Wed Sep 28 08:58:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13451_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13451_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 09:30:19 2011] Spatial fit model total counts = 18.620000, observed total counts = 21.000000
[Wed Sep 28 09:30:19 2011] Offset between fit and detection position for source 3 = 0.058542 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.058542 pixels
  Position = (725.0, 1069.2) = 1 3 52.38 -22 14 50.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 18.8 +/- 4.3
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Wed Sep 28 09:30:19 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 09:30:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 09:30:19 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 09:30:19 2011] Source does appear to be extended
[Wed Sep 28 09:30:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 09:40:26 2011] Writing source region out to fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3_src.reg
[Wed Sep 28 09:40:26 2011] Extracting stamp from image fullrun_ccd1_acisf13451_pi14-548_cl_sm2.00.img.gz, (697, 1041) - (753, 1098)
[Wed Sep 28 09:40:26 2011] Writing fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3.gif
[Wed Sep 28 09:46:15 2011] Size of ../../acisf13451/products/events/fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3_src.evt.gz[events] = 20 counts
[Wed Sep 28 09:46:15 2011] Mean chipx,y = (281.40, 770.40)
[Wed Sep 28 09:46:15 2011] Mean tdetx,y = (4361.60, 4388.40)
[Wed Sep 28 09:46:15 2011] chipx,y range = (264.00-300.00, 755.00-787.00)
[Wed Sep 28 09:46:15 2011] Size of ../../acisf13451/products/events/fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 14 counts
[Wed Sep 28 09:46:17 2011] Not generating rmf since there are only 18 counts
[Wed Sep 28 09:46:17 2011] arf not found, will run specextract
[Wed Sep 28 09:46:48 2011] ../../acisf13451/products/spectra/fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3.warf not found
[Wed Sep 28 09:46:48 2011] ../../acisf13451/products/spectra/fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3.wrmf not found
[Wed Sep 28 09:46:48 2011] Removal of ../../acisf13451/products/spectra/fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3.soff failed
[Wed Sep 28 09:51:06 2011] Spectrum 3 has only 19 counts, deleting rmf
[Wed Sep 28 09:51:06 2011] 197.486
[Wed Sep 28 10:13:10 2011] Updating aperture counts using extracted products
[Wed Sep 28 10:13:10 2011] Error reading totcts from fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Sep 28 10:13:10 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 10:13:10 2011] Using photon index=1.80, rate=0.000268, arf fullrun_ccd1_acisf13451_pi14-548_pass1_cl_src3.arf
[Wed Sep 28 10:13:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 10:13:10 2011] Updating source flux to 3.2e-15
[Wed Sep 28 10:13:18 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting