[Sat Feb 25 14:59:30 2012] Detection parameters:
  Position = (531.6, 192.4) = 1 3 39.31 -21 50 33.4
  Extent = 1.6" x 1.2", rotation angle = 123 degrees
  Source counts = 10.6 +/- 3.9
  Background counts = 4.4
  Rate = 0.0002 +/- 6e-05

[Sat Feb 25 14:59:31 2012] Off-axis axis estimate = 7.32'
[Sat Feb 25 16:35:57 2012] Using EEF radius (= 2.38 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 16:35:57 2012] Initial guess for spatial extent in simple fitting = 2.38"
[Sat Feb 25 16:35:57 2012] source mask rpix=4.8, npix_max = 113, mask sum = 121, frac = 1.062
[Sat Feb 25 16:35:57 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 2.38"
[Sat Feb 25 17:07:54 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src27.ximg exists
[Sat Feb 25 17:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src27.csv
[Sat Feb 25 17:07:54 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src27_1.ximg exists
[Sat Feb 25 17:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src27.csv
[Sat Feb 25 17:07:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 17:07:54 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Sat Feb 25 17:07:54 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Feb 25 17:07:54 2012] Fit fullrun_ccd3_acisf13447_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Feb 25 17:08:09 2012] Spatial fit model total counts = 25.913500, observed total counts = 26.000000
[Sat Feb 25 17:08:09 2012] Offset between fit and detection position for source 28 = 1.993861 pixels
[Sat Feb 25 17:08:09 2012] 26.565870 total counts/ 18.149600 bgd. counts: snr = 1.975541
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.993861 pixels
  Position = (533.4, 193.2) = 1 3 39.26 -21 50 33.3
  Extent = 1.2 (0.6-4.8)", rotation angle = 0
  Source counts = 8.4 +/- 5.2
  Background counts = 18.1
  Rate = 0.0001 +/- 7e-05
[Sat Feb 25 17:08:09 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 17:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 17:08:09 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 17:08:09 2012] Source does appear to be extended
[Sat Feb 25 17:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 18:33:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 18:33:11 2012] Initial guess for spatial extent in simple fitting = 1.20"
[Sat Feb 25 18:33:11 2012] Spatial fitting skipped for pass 1: source                                 has 8.4 net counts, is at off-axis angle 7.3'
[Sat Feb 25 19:02:20 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 19:02:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 19:02:20 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 19:02:20 2012] Source does appear to be extended
[Sat Feb 25 19:02:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:33:56 2012] Writing source region out to fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28_src.reg
[Sat Feb 25 19:33:56 2012] Extracting stamp from image fullrun_ccd3_acisf13447_pi14-548_cl_sm2.00.img.gz, (479, 139) - (588, 248)
[Sat Feb 25 19:33:56 2012] Writing fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28.gif
[Sat Feb 25 19:48:50 2012] Size of ../../acisf13447/products/events/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28_src.evt.gz[events] = 15 counts
[Sat Feb 25 19:48:50 2012] Mean chipx,y = (857.33, 129.80)
[Sat Feb 25 19:48:50 2012] Mean tdetx,y = (5002.20, 3918.33)
[Sat Feb 25 19:48:50 2012] chipx,y range = (840.00-874.00, 112.00-152.00)
[Sat Feb 25 19:48:50 2012] Size of ../../acisf13447/products/events/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 47 counts
[Sat Feb 25 19:48:51 2012] Not generating rmf since there are only 8 counts
[Sat Feb 25 19:48:51 2012] arf not found, will run specextract
[Sat Feb 25 19:49:05 2012] ../../acisf13447/products/spectra/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28.warf not found
[Sat Feb 25 19:49:05 2012] ../../acisf13447/products/spectra/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28.wrmf not found
[Sat Feb 25 19:49:05 2012] Removal of ../../acisf13447/products/spectra/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28.soff failed
[Sat Feb 25 19:53:53 2012] Spectrum 28 has only 8 counts, deleting rmf
[Sat Feb 25 19:53:53 2012] 176.423
[Sat Feb 25 19:53:59 2012] Updating aperture counts using extracted products
[Sat Feb 25 19:53:59 2012] Error reading totcts from fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28_src.pi.gz
[Sat Feb 25 19:54:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 19:54:00 2012] Using photon index=1.80, rate=0.000122, arf fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src28.arf
[Sat Feb 25 19:54:00 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 19:54:00 2012] Updating source flux to 1.7e-15
[Sat Feb 25 19:54:26 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting