[Sat Feb 25 14:59:30 2012] Detection parameters:
  Position = (308.4, 1039.2) = 1 3 47.21 -21 43 36.8
  Extent = 0.5" x 0.5", rotation angle = 27 degrees
  Source counts = 22.9 +/- 4.9
  Background counts = 1.1
  Rate = 0.0003 +/- 7e-05

[Sat Feb 25 14:59:31 2012] Off-axis axis estimate = 2.11'
[Sat Feb 25 16:35:57 2012] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 16:35:57 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Sat Feb 25 16:35:57 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.150
[Sat Feb 25 16:35:57 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 0.44"
[Sat Feb 25 17:07:54 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src18.ximg exists
[Sat Feb 25 17:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src18.csv
[Sat Feb 25 17:07:54 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src18_1.ximg exists
[Sat Feb 25 17:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src18.csv
[Sat Feb 25 17:07:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13447_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 17:07:54 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sat Feb 25 17:07:54 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Feb 25 17:07:54 2012] Fit fullrun_ccd3_acisf13447_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Feb 25 17:08:09 2012] Spatial fit model total counts = 23.828200, observed total counts = 24.000000
[Sat Feb 25 17:08:09 2012] Offset between fit and detection position for source 16 = 0.732889 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.732889 pixels
  Position = (308.9, 1039.7) = 1 3 47.20 -21 43 36.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 23.8 +/- 4.9
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Sat Feb 25 17:08:09 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 17:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 17:08:09 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 17:08:09 2012] Source does appear to be extended
[Sat Feb 25 17:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 18:33:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 18:33:11 2012] Initial guess for spatial extent in simple fitting = 0.49"
[Sat Feb 25 18:33:11 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.019
[Sat Feb 25 18:33:11 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.49"
[Sat Feb 25 19:02:06 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass1_src18.ximg exists
[Sat Feb 25 19:02:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13447_pi14-548_cl_pass1_src18.csv
[Sat Feb 25 19:02:06 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass1_src18_1.ximg exists
[Sat Feb 25 19:02:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13447_pi14-548_cl_pass1_src18.csv
[Sat Feb 25 19:02:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13447_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13447_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:02:06 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat Feb 25 19:02:06 2012] fullrun_ccd3_acisf13447_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Feb 25 19:02:06 2012] Fit fullrun_ccd3_acisf13447_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Feb 25 19:02:20 2012] Spatial fit model total counts = 23.440000, observed total counts = 24.000000
[Sat Feb 25 19:02:20 2012] Offset between fit and detection position for source 16 = 0.090752 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.090752 pixels
  Position = (308.9, 1039.8) = 1 3 47.21 -21 43 36.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 23.4 +/- 4.8
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Sat Feb 25 19:02:20 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 19:02:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 19:02:20 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 19:02:20 2012] Source does appear to be extended
[Sat Feb 25 19:02:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:33:56 2012] Writing source region out to fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16_src.reg
[Sat Feb 25 19:33:56 2012] Extracting stamp from image fullrun_ccd3_acisf13447_pi14-548_cl_sm2.00.img.gz, (287, 1018) - (331, 1062)
[Sat Feb 25 19:33:56 2012] Writing fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16.gif
[Sat Feb 25 19:43:47 2012] Size of ../../acisf13447/products/events/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16_src.evt.gz[events] = 24 counts
[Sat Feb 25 19:43:47 2012] Mean chipx,y = (694.92, 994.67)
[Sat Feb 25 19:43:47 2012] Mean tdetx,y = (4137.33, 3755.92)
[Sat Feb 25 19:43:47 2012] chipx,y range = (680.00-714.00, 975.00-1013.00)
[Sat Feb 25 19:43:47 2012] Size of ../../acisf13447/products/events/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 11 counts
[Sat Feb 25 19:43:48 2012] Not generating rmf since there are only 23 counts
[Sat Feb 25 19:43:48 2012] arf not found, will run specextract
[Sat Feb 25 19:44:17 2012] ../../acisf13447/products/spectra/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16.warf not found
[Sat Feb 25 19:44:17 2012] ../../acisf13447/products/spectra/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16.wrmf not found
[Sat Feb 25 19:44:17 2012] Removal of ../../acisf13447/products/spectra/fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16.soff failed
[Sat Feb 25 19:53:53 2012] Spectrum 16 has only 23 counts, deleting rmf
[Sat Feb 25 19:53:53 2012] 194.759
[Sat Feb 25 19:53:59 2012] Updating aperture counts using extracted products
[Sat Feb 25 19:53:59 2012] Error reading totcts from fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16_src.pi.gz
[Sat Feb 25 19:54:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 19:54:00 2012] Using photon index=1.80, rate=0.000339, arf fullrun_ccd3_acisf13447_pi14-548_pass1_cl_src16.arf
[Sat Feb 25 19:54:00 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 19:54:00 2012] Updating source flux to 4.1e-15
[Sat Feb 25 19:54:26 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting