[Sat Feb 25 14:59:22 2012] Detection parameters:
  Position = (510.5, 620.1) = 1 4 28.97 -21 42 53.9
  Extent = 1.9" x 1.5", rotation angle = 1 degrees
  Source counts = 152.4 +/- 13.2
  Background counts = 21.6
  Rate = 0.002 +/- 0.0002

[Sat Feb 25 14:59:23 2012] Off-axis axis estimate = 7.83'
[Sat Feb 25 15:02:21 2012] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:02:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 15:02:21 2012] Initial guess for spatial extent in simple fitting = 2.71"
[Sat Feb 25 15:02:21 2012] source mask rpix=5.5, npix_max = 144, mask sum = 144, frac = 0.995
[Sat Feb 25 15:02:21 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 2.71"
[Sat Feb 25 15:43:22 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src3.ximg exists
[Sat Feb 25 15:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src3.csv
[Sat Feb 25 15:43:22 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Feb 25 15:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src3.csv
[Sat Feb 25 15:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 15:43:22 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Feb 25 15:43:22 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Feb 25 15:43:22 2012] Fit fullrun_ccd0_acisf13447_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Feb 25 17:08:01 2012] Spatial fit model total counts = 188.000000, observed total counts = 188.000000
[Sat Feb 25 17:08:01 2012] Offset between fit and detection position for source 8 = 0.539767 pixels
[Sat Feb 25 17:08:01 2012] 188.066200 total counts/ 35.234200 bgd. counts: snr = 25.747323
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.539767 pixels
  Position = (511.1, 620.2) = 1 4 28.97 -21 42 54.1
  Extent = 2.6 (2.2-2.9)", rotation angle = 0
  Source counts = 152.8 +/- 13.7
  Background counts = 35.2
  Rate = 0.002 +/- 0.0002
[Sat Feb 25 17:08:01 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 17:08:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 17:08:01 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 17:08:01 2012] Source does appear to be extended
[Sat Feb 25 17:08:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:08:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:08:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 17:08:29 2012] Initial guess for spatial extent in simple fitting = 2.56"
[Sat Feb 25 17:08:29 2012] source mask rpix=5.2, npix_max = 129, mask sum = 132, frac = 1.017
[Sat Feb 25 17:08:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 2.56"
[Sat Feb 25 17:48:12 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src3.ximg exists
[Sat Feb 25 17:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src3.csv
[Sat Feb 25 17:48:12 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Feb 25 17:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src3.csv
[Sat Feb 25 17:48:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 17:48:12 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Feb 25 17:48:12 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Feb 25 17:48:12 2012] Fit fullrun_ccd0_acisf13447_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Feb 25 19:02:13 2012] Spatial fit model total counts = 186.000000, observed total counts = 186.000000
[Sat Feb 25 19:02:13 2012] Offset between fit and detection position for source 8 = 0.023936 pixels
[Sat Feb 25 19:02:13 2012] 186.000300 total counts/ 35.308300 bgd. counts: snr = 25.360149
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.023936 pixels
  Position = (511.1, 620.2) = 1 4 28.97 -21 42 54.1
  Extent = 2.5 (2.2-2.8)", rotation angle = 0
  Source counts = 150.7 +/- 13.6
  Background counts = 35.3
  Rate = 0.002 +/- 0.0002
[Sat Feb 25 19:02:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 19:02:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 19:02:13 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 19:02:13 2012] Source does appear to be extended
[Sat Feb 25 19:02:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:02:40 2012] Writing source region out to fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8_src.reg
[Sat Feb 25 19:02:40 2012] Extracting stamp from image fullrun_ccd0_acisf13447_pi14-548_cl_sm2.00.img.gz, (396, 505) - (626, 735)
[Sat Feb 25 19:02:41 2012] Writing fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8.gif
[Sat Feb 25 19:04:32 2012] Size of ../../acisf13447/products/events/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8_src.evt.gz[events] = 177 counts
[Sat Feb 25 19:04:32 2012] Mean chipx,y = (338.77, 491.70)
[Sat Feb 25 19:04:32 2012] Mean tdetx,y = (3552.70, 4793.23)
[Sat Feb 25 19:04:32 2012] chipx,y range = (307.00-363.00, 460.00-525.00)
[Sat Feb 25 19:04:32 2012] Size of ../../acisf13447/products/events/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 226 counts
[Sat Feb 25 19:04:34 2012] rmf not found, will run specextract
[Sat Feb 25 19:04:34 2012] arf not found, will run specextract
[Sat Feb 25 19:04:58 2012] ../../acisf13447/products/spectra/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8.warf not found
[Sat Feb 25 19:04:58 2012] ../../acisf13447/products/spectra/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8.wrmf not found
[Sat Feb 25 19:04:58 2012] Removal of ../../acisf13447/products/spectra/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8.soff failed
[Sat Feb 25 19:15:13 2012] Keeping rmf generated by specextract
[Sat Feb 25 19:15:13 2012] 171.98
[Sat Feb 25 19:53:58 2012] Updating aperture counts using extracted products
[Sat Feb 25 19:53:58 2012] Error reading totcts from fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8_src.pi.gz
[Sat Feb 25 19:53:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 19:53:58 2012] Using photon index=1.80, rate=0.00218, arf fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8.arf
[Sat Feb 25 19:53:58 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 19:53:58 2012] Updating source flux to 3e-14
[Sat Feb 25 19:54:12 2012] Reading fit data from acisf13447/analysis//spectral/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8_pl.csv
[Sat Feb 25 19:54:12 2012] Spectral fit parameter nH value = 9.99155e+12
[Sat Feb 25 19:54:12 2012] Spectral fit parameter PhoIndex value = 1.98174
[Sat Feb 25 19:54:12 2012] Failed to get F(0.3-8.0) from acisf13447/analysis//spectral/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Sat Feb 25 19:54:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 19:54:12 2012] Using Nh = 1e+13, photon index=1.98, rate=0.00218, arf fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src8.arf
[Sat Feb 25 19:54:12 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 19:54:12 2012] Updating source flux to 3.1e-14