[Sat Feb 25 14:59:22 2012] Detection parameters:
  Position = (931.6, 761.2) = 1 4 14.10 -21 41 44.6
  Extent = 0.7" x 0.5", rotation angle = 29 degrees
  Source counts = 10.1 +/- 3.3
  Background counts = 0.9
  Rate = 0.0001 +/- 5e-05

[Sat Feb 25 14:59:23 2012] Off-axis axis estimate = 4.97'
[Sat Feb 25 15:02:21 2012] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:02:21 2012] Initial guess for spatial extent in simple fitting = 1.17"
[Sat Feb 25 15:02:21 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.910
[Sat Feb 25 15:02:21 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 1.17"
[Sat Feb 25 15:43:22 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src12.ximg exists
[Sat Feb 25 15:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src12.csv
[Sat Feb 25 15:43:22 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Feb 25 15:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src12.csv
[Sat Feb 25 15:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13447_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 15:43:22 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Feb 25 15:43:22 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Feb 25 15:43:22 2012] Fit fullrun_ccd0_acisf13447_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Feb 25 17:08:01 2012] Spatial fit model total counts = 23.706200, observed total counts = 24.000000
[Sat Feb 25 17:08:01 2012] Offset between fit and detection position for source 19 = 1.631198 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.631198 pixels
  Position = (930.2, 762.0) = 1 4 14.17 -21 41 44.5
  Extent = 1.4 (0.8-1.8)", rotation angle = 0
  Source counts = 24.2 +/- 4.9
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Sat Feb 25 17:08:01 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 17:08:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 17:08:01 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 17:08:01 2012] Source does appear to be extended
[Sat Feb 25 17:08:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:08:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:08:29 2012] Initial guess for spatial extent in simple fitting = 1.44"
[Sat Feb 25 17:08:29 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.891
[Sat Feb 25 17:08:29 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 1.44"
[Sat Feb 25 17:48:12 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src12.ximg exists
[Sat Feb 25 17:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src12.csv
[Sat Feb 25 17:48:12 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src12_1.ximg exists
[Sat Feb 25 17:48:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src12.csv
[Sat Feb 25 17:48:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13447_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 17:48:12 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sat Feb 25 17:48:12 2012] fullrun_ccd0_acisf13447_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Feb 25 17:48:12 2012] Fit fullrun_ccd0_acisf13447_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Feb 25 19:02:13 2012] Spatial fit model total counts = 23.235100, observed total counts = 24.000000
[Sat Feb 25 19:02:13 2012] Offset between fit and detection position for source 19 = 0.139726 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.139726 pixels
  Position = (930.0, 762.0) = 1 4 14.17 -21 41 44.5
  Extent = 1.4 (0.9-1.7)", rotation angle = 0
  Source counts = 23.9 +/- 4.9
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Sat Feb 25 19:02:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 19:02:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 19:02:13 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 19:02:13 2012] Source does appear to be extended
[Sat Feb 25 19:02:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:02:41 2012] Writing source region out to fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19_src.reg
[Sat Feb 25 19:02:41 2012] Extracting stamp from image fullrun_ccd0_acisf13447_pi14-548_cl_sm2.00.img.gz, (866, 698) - (994, 826)
[Sat Feb 25 19:02:41 2012] Writing fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19.gif
[Sat Feb 25 19:09:26 2012] Size of ../../acisf13447/products/events/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19_src.evt.gz[events] = 24 counts
[Sat Feb 25 19:09:26 2012] Mean chipx,y = (777.50, 540.04)
[Sat Feb 25 19:09:26 2012] Mean tdetx,y = (3601.04, 4354.50)
[Sat Feb 25 19:09:26 2012] chipx,y range = (759.00-800.00, 527.00-564.00)
[Sat Feb 25 19:09:26 2012] Size of ../../acisf13447/products/events/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 67 counts
[Sat Feb 25 19:09:28 2012] Not generating rmf since there are only 23 counts
[Sat Feb 25 19:09:28 2012] arf not found, will run specextract
[Sat Feb 25 19:09:50 2012] ../../acisf13447/products/spectra/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19.warf not found
[Sat Feb 25 19:09:50 2012] ../../acisf13447/products/spectra/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19.wrmf not found
[Sat Feb 25 19:09:50 2012] Removal of ../../acisf13447/products/spectra/fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19.soff failed
[Sat Feb 25 19:15:13 2012] Spectrum 19 has only 24 counts, deleting rmf
[Sat Feb 25 19:15:13 2012] 177.395
[Sat Feb 25 19:53:58 2012] Updating aperture counts using extracted products
[Sat Feb 25 19:53:58 2012] Error reading totcts from fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19_src.pi.gz
[Sat Feb 25 19:53:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 19:53:58 2012] Using photon index=1.80, rate=0.000346, arf fullrun_ccd0_acisf13447_pi14-548_pass1_cl_src19.arf
[Sat Feb 25 19:53:58 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 19:53:58 2012] Updating source flux to 4.6e-15
[Sat Feb 25 19:54:03 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting