[Wed Oct  5 19:45:50 2011] Detection parameters:
  Position = (233.4, 711.5) = 1 3 9.36 -21 30 32.1
  Extent = 0.6" x 0.5", rotation angle = 24 degrees
  Source counts = 20.4 +/- 4.7
  Background counts = 1.6
  Rate = 0.0005 +/- 0.0001

[Wed Oct  5 19:45:50 2011] Off-axis axis estimate = 5.99'
[Wed Oct  5 20:35:32 2011] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:35:32 2011] Initial guess for spatial extent in simple fitting = 1.63"
[Wed Oct  5 20:35:32 2011] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.847
[Wed Oct  5 20:35:32 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.63"
[Wed Oct  5 20:51:17 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src6.ximg exists
[Wed Oct  5 20:51:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src6.csv
[Wed Oct  5 20:51:17 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Oct  5 20:51:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src6.csv
[Wed Oct  5 20:51:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 20:51:17 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct  5 20:51:17 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct  5 20:51:17 2011] Fit fullrun_ccd2_acisf13444_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Oct  5 21:26:40 2011] Spatial fit model total counts = 24.417200, observed total counts = 26.000000
[Wed Oct  5 21:26:40 2011] Offset between fit and detection position for source 4 = 1.173834 pixels
[Wed Oct  5 21:26:40 2011] 24.418300 total counts/ 0.000000 bgd. counts: snr = 151834372186308.750000
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.173834 pixels
  Position = (234.6, 711.6) = 1 3 9.34 -21 30 32.3
  Extent = 1.4 (1.2-1.7)", rotation angle = 0
  Source counts = 24.4 +/- 4.9
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Oct  5 21:26:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:26:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:26:40 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:26:40 2011] Source does appear to be extended
[Wed Oct  5 21:26:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:06:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:06:57 2011] Initial guess for spatial extent in simple fitting = 1.45"
[Wed Oct  5 22:06:57 2011] source mask rpix=2.9, npix_max = 47, mask sum = 47, frac = 0.991
[Wed Oct  5 22:06:57 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.45"
[Wed Oct  5 22:24:02 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src6.ximg exists
[Wed Oct  5 22:24:02 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src6.csv
[Wed Oct  5 22:24:02 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Oct  5 22:24:02 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src6.csv
[Wed Oct  5 22:24:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:24:02 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct  5 22:24:02 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct  5 22:24:02 2011] Fit fullrun_ccd2_acisf13444_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Oct  5 23:09:45 2011] Spatial fit model total counts = 25.024600, observed total counts = 26.000000
[Wed Oct  5 23:09:45 2011] Offset between fit and detection position for source 4 = 0.156014 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.156014 pixels
  Position = (234.4, 711.6) = 1 3 9.35 -21 30 32.3
  Extent = 1.5 (1.1-1.7)", rotation angle = 0
  Source counts = 25.0 +/- 5.0
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Wed Oct  5 23:09:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 23:09:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 23:09:45 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 23:09:45 2011] Source does appear to be extended
[Wed Oct  5 23:09:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 23:41:11 2011] Writing source region out to fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4_src.reg
[Wed Oct  5 23:41:11 2011] Extracting stamp from image fullrun_ccd2_acisf13444_pi14-548_cl_sm2.00.img.gz, (166, 644) - (302, 780)
[Wed Oct  5 23:41:11 2011] Writing fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4.gif
[Wed Oct  5 23:46:57 2011] Size of ../../acisf13444/products/events/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4_src.evt.gz[events] = 26 counts
[Wed Oct  5 23:46:57 2011] Mean chipx,y = (159.50, 327.81)
[Wed Oct  5 23:46:57 2011] Mean tdetx,y = (3388.81, 3926.50)
[Wed Oct  5 23:46:57 2011] chipx,y range = (137.00-178.00, 310.00-347.00)
[Wed Oct  5 23:46:57 2011] Size of ../../acisf13444/products/events/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 36 counts
[Wed Oct  5 23:47:03 2011] Not generating rmf since there are only 25 counts
[Wed Oct  5 23:47:03 2011] arf not found, will run specextract
[Wed Oct  5 23:47:30 2011] ../../acisf13444/products/spectra/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4.warf not found
[Wed Oct  5 23:47:30 2011] ../../acisf13444/products/spectra/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4.wrmf not found
[Wed Oct  5 23:47:30 2011] Removal of ../../acisf13444/products/spectra/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4.soff failed
[Wed Oct  5 23:57:50 2011] Spectrum 4 has only 25 counts, deleting rmf
[Wed Oct  5 23:57:50 2011] 175.118
[Thu Oct  6 00:06:21 2011] Updating aperture counts using extracted products
[Thu Oct  6 00:06:21 2011] Error reading totcts from fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4_src.pi.gz
[Thu Oct  6 00:06:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 00:06:21 2011] Using photon index=1.80, rate=0.000655, arf fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4.arf
[Thu Oct  6 00:06:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 00:06:21 2011] Updating source flux to 8.9e-15
[Thu Oct  6 00:06:26 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct  6 00:06:27 2011] acisf13444/analysis//spectral/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete