[Wed Oct  5 19:45:50 2011] Detection parameters:
  Position = (514.0, 571.0) = 1 2 59.47 -21 31 41.2
  Extent = 1.0" x 0.7", rotation angle = 130 degrees
  Source counts = 34.6 +/- 6.0
  Background counts = 1.4
  Rate = 0.0009 +/- 0.0002

[Wed Oct  5 19:45:50 2011] Off-axis axis estimate = 4.98'
[Wed Oct  5 20:35:32 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:35:32 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Wed Oct  5 20:35:32 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.086
[Wed Oct  5 20:35:32 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.17"
[Wed Oct  5 20:51:17 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct  5 20:51:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 20:51:17 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct  5 20:51:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 20:51:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13444_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 20:51:17 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 20:51:17 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 20:51:17 2011] Fit fullrun_ccd2_acisf13444_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 21:26:40 2011] Spatial fit model total counts = 40.508200, observed total counts = 41.000000
[Wed Oct  5 21:26:40 2011] Offset between fit and detection position for source 1 = 1.334797 pixels
[Wed Oct  5 21:26:40 2011] 40.543470 total counts/ 2.508970 bgd. counts: snr = 24.012091
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.334797 pixels
  Position = (515.3, 570.7) = 1 2 59.44 -21 31 41.6
  Extent = 1.2 (0.6-1.5)", rotation angle = 0
  Source counts = 38.0 +/- 6.4
  Background counts = 2.5
  Rate = 0.001 +/- 0.0002
[Wed Oct  5 21:26:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:26:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:26:40 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:26:40 2011] Source does appear to be extended
[Wed Oct  5 21:26:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:06:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:06:57 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Wed Oct  5 22:06:57 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Wed Oct  5 22:06:57 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.17"
[Wed Oct  5 22:24:02 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct  5 22:24:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src3.csv
[Wed Oct  5 22:24:02 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct  5 22:24:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src3.csv
[Wed Oct  5 22:24:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13444_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:24:02 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 22:24:02 2011] fullrun_ccd2_acisf13444_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 22:24:02 2011] Fit fullrun_ccd2_acisf13444_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 23:09:45 2011] Spatial fit model total counts = 41.321800, observed total counts = 41.000000
[Wed Oct  5 23:09:45 2011] Offset between fit and detection position for source 1 = 0.089563 pixels
[Wed Oct  5 23:09:45 2011] 41.467030 total counts/ 2.907230 bgd. counts: snr = 22.614921
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.089563 pixels
  Position = (515.3, 570.6) = 1 2 59.44 -21 31 41.7
  Extent = 1.2 (0.8-1.5)", rotation angle = 0
  Source counts = 38.6 +/- 6.4
  Background counts = 2.9
  Rate = 0.001 +/- 0.0002
[Wed Oct  5 23:09:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 23:09:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 23:09:45 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 23:09:45 2011] Source does appear to be extended
[Wed Oct  5 23:09:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 23:41:11 2011] Writing source region out to fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 23:41:11 2011] Extracting stamp from image fullrun_ccd2_acisf13444_pi14-548_cl_sm2.00.img.gz, (462, 517) - (569, 624)
[Wed Oct  5 23:41:11 2011] Writing fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 23:42:44 2011] Size of ../../acisf13444/products/events/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1_src.evt.gz[events] = 42 counts
[Wed Oct  5 23:42:44 2011] Mean chipx,y = (391.17, 541.95)
[Wed Oct  5 23:42:44 2011] Mean tdetx,y = (3602.95, 3694.83)
[Wed Oct  5 23:42:44 2011] chipx,y range = (375.00-410.00, 519.00-562.00)
[Wed Oct  5 23:42:44 2011] Size of ../../acisf13444/products/events/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 23 counts
[Wed Oct  5 23:42:48 2011] Not generating rmf since there are only 38 counts
[Wed Oct  5 23:42:48 2011] arf not found, will run specextract
[Wed Oct  5 23:43:20 2011] ../../acisf13444/products/spectra/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1.warf not found
[Wed Oct  5 23:43:20 2011] ../../acisf13444/products/spectra/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1.wrmf not found
[Wed Oct  5 23:43:20 2011] Removal of ../../acisf13444/products/spectra/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1.soff failed
[Wed Oct  5 23:57:50 2011] Spectrum 1 has only 39 counts, deleting rmf
[Wed Oct  5 23:57:50 2011] 182.367
[Thu Oct  6 00:06:21 2011] Updating aperture counts using extracted products
[Thu Oct  6 00:06:21 2011] Error reading totcts from fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct  6 00:06:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 00:06:21 2011] Using photon index=1.80, rate=0.00101, arf fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1.arf
[Thu Oct  6 00:06:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 00:06:21 2011] Updating source flux to 1.3e-14
[Thu Oct  6 00:06:26 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct  6 00:06:27 2011] acisf13444/analysis//spectral/fullrun_ccd2_acisf13444_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete