[Thu Oct 20 10:59:51 2011] Detection parameters:
  Position = (378.2, 764.9) = 1 1 15.24 -21 50 13.9
  Extent = 0.5" x 0.5", rotation angle = 168 degrees
  Source counts = 25.9 +/- 5.2
  Background counts = 1.1
  Rate = 0.0004 +/- 7e-05

[Thu Oct 20 10:59:51 2011] Off-axis axis estimate = 3.17'
[Thu Oct 20 12:23:37 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 12:23:37 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Thu Oct 20 12:23:37 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.302
[Thu Oct 20 12:23:37 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.62"
[Thu Oct 20 12:51:38 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src8.ximg exists
[Thu Oct 20 12:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src8.csv
[Thu Oct 20 12:51:38 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src8_1.ximg exists
[Thu Oct 20 12:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src8.csv
[Thu Oct 20 12:51:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 12:51:38 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Thu Oct 20 12:51:38 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Oct 20 12:51:38 2011] Fit fullrun_ccd3_acisf13443_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Oct 20 12:51:51 2011] Spatial fit model total counts = 26.190400, observed total counts = 28.000000
[Thu Oct 20 12:51:51 2011] Offset between fit and detection position for source 5 = 0.775232 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.775232 pixels
  Position = (378.8, 765.5) = 1 1 15.23 -21 50 13.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 26.0 +/- 5.1
  Background counts = 0.0
  Rate = 0.0004 +/- 7e-05
[Thu Oct 20 12:51:51 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 12:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 12:51:51 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 12:51:51 2011] Source does appear to be extended
[Thu Oct 20 12:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 13:57:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 13:57:04 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Oct 20 13:57:04 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.759
[Thu Oct 20 13:57:04 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.60"
[Thu Oct 20 14:23:55 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src8.ximg exists
[Thu Oct 20 14:23:55 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src8_1.ximg exists
[Thu Oct 20 14:23:55 2011] Fit fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src8 appears to have run properly
[Thu Oct 20 14:23:56 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Thu Oct 20 14:23:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src8.csv
[Thu Oct 20 14:23:56 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Oct 20 14:23:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src8.csv
[Thu Oct 20 14:23:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 14:24:08 2011] Spatial fit model total counts = 24.640800, observed total counts = 27.000000
[Thu Oct 20 14:24:08 2011] Offset between fit and detection position for source 5 = 0.046725 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.046725 pixels
  Position = (378.7, 765.5) = 1 1 15.24 -21 50 13.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 24.6 +/- 5.0
  Background counts = 0.0
  Rate = 0.0004 +/- 7e-05
[Thu Oct 20 14:24:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 14:24:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 14:24:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 14:24:08 2011] Source does appear to be extended
[Thu Oct 20 14:24:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 14:54:33 2011] Writing source region out to fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5_src.reg
[Thu Oct 20 14:54:33 2011] Extracting stamp from image fullrun_ccd3_acisf13443_pi14-548_cl_sm2.00.img.gz, (351, 737) - (407, 794)
[Thu Oct 20 14:54:33 2011] Writing fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5.gif
[Thu Oct 20 14:58:35 2011] Size of ../../acisf13443/products/events/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5_src.evt.gz[events] = 27 counts
[Thu Oct 20 14:58:35 2011] Mean chipx,y = (718.89, 708.81)
[Thu Oct 20 14:58:35 2011] Mean tdetx,y = (4423.19, 3779.89)
[Thu Oct 20 14:58:35 2011] chipx,y range = (702.00-735.00, 695.00-729.00)
[Thu Oct 20 14:58:35 2011] Size of ../../acisf13443/products/events/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 11 counts
[Thu Oct 20 14:58:36 2011] Not generating rmf since there are only 24 counts
[Thu Oct 20 14:58:36 2011] arf not found, will run specextract
[Thu Oct 20 14:59:09 2011] ../../acisf13443/products/spectra/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5.warf not found
[Thu Oct 20 14:59:09 2011] ../../acisf13443/products/spectra/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5.wrmf not found
[Thu Oct 20 14:59:09 2011] Removal of ../../acisf13443/products/spectra/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5.soff failed
[Thu Oct 20 15:06:53 2011] Spectrum 5 has only 25 counts, deleting rmf
[Thu Oct 20 15:06:53 2011] 194.153
[Thu Oct 20 15:08:02 2011] Updating aperture counts using extracted products
[Thu Oct 20 15:08:02 2011] Error reading totcts from fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Oct 20 15:08:02 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 15:08:02 2011] Using photon index=1.80, rate=0.000354, arf fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src5.arf
[Thu Oct 20 15:08:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 15:08:02 2011] Updating source flux to 4.3e-15
[Thu Oct 20 15:08:19 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting