[Thu Oct 20 10:59:51 2011] Detection parameters:
  Position = (929.0, 366.7) = 1 0 55.76 -21 53 29.7
  Extent = 2.7" x 1.7", rotation angle = 75 degrees
  Source counts = 162.4 +/- 13.7
  Background counts = 24.6
  Rate = 0.002 +/- 0.0002

[Thu Oct 20 10:59:51 2011] Off-axis axis estimate = 8.74'
[Thu Oct 20 12:23:37 2011] Using EEF radius (= 3.38 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 12:23:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 12:23:37 2011] Initial guess for spatial extent in simple fitting = 3.38"
[Thu Oct 20 12:23:37 2011] source mask rpix=6.9, npix_max = 217, mask sum = 210, frac = 0.967
[Thu Oct 20 12:23:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.38"
[Thu Oct 20 12:51:38 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 12:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 12:51:38 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 12:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 12:51:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13443_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 12:51:38 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 12:51:38 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 12:51:38 2011] Fit fullrun_ccd3_acisf13443_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 12:51:51 2011] Spatial fit model total counts = 230.979000, observed total counts = 231.000000
[Thu Oct 20 12:51:51 2011] Offset between fit and detection position for source 2 = 1.233794 pixels
[Thu Oct 20 12:51:51 2011] 231.728800 total counts/ 84.175800 bgd. counts: snr = 16.082532
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.233794 pixels
  Position = (930.0, 367.4) = 1 0 55.75 -21 53 29.6
  Extent = 2.2 (1.8-2.7)", rotation angle = 0
  Source counts = 147.6 +/- 15.2
  Background counts = 84.2
  Rate = 0.002 +/- 0.0002
[Thu Oct 20 12:51:51 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 12:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 12:51:51 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 12:51:51 2011] Source does appear to be extended
[Thu Oct 20 12:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 13:57:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 13:57:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 13:57:04 2011] Initial guess for spatial extent in simple fitting = 2.17"
[Thu Oct 20 13:57:04 2011] source mask rpix=4.4, npix_max = 96, mask sum = 100, frac = 1.033
[Thu Oct 20 13:57:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.17"
[Thu Oct 20 14:23:55 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 14:23:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 14:23:55 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 14:23:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 14:23:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13443_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 14:23:56 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 14:23:56 2011] fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 14:23:56 2011] Fit fullrun_ccd3_acisf13443_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 14:24:08 2011] Spatial fit model total counts = 191.990000, observed total counts = 192.000000
[Thu Oct 20 14:24:08 2011] Offset between fit and detection position for source 2 = 0.111386 pixels
[Thu Oct 20 14:24:08 2011] 192.502900 total counts/ 68.935900 bgd. counts: snr = 14.882633
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.111386 pixels
  Position = (930.1, 367.4) = 1 0 55.74 -21 53 29.6
  Extent = 1.7 (1.4-2.3)", rotation angle = 0
  Source counts = 123.6 +/- 13.9
  Background counts = 68.9
  Rate = 0.002 +/- 0.0002
[Thu Oct 20 14:24:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 14:24:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 14:24:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 14:24:08 2011] Source does appear to be extended
[Thu Oct 20 14:24:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 14:54:33 2011] Writing source region out to fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2_src.reg
[Thu Oct 20 14:54:33 2011] Extracting stamp from image fullrun_ccd3_acisf13443_pi14-548_cl_sm2.00.img.gz, (850, 288) - (1010, 447)
[Thu Oct 20 14:54:33 2011] Writing fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2.gif
[Thu Oct 20 14:54:35 2011] Size of ../../acisf13443/products/events/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2_src.evt.gz[events] = 170 counts
[Thu Oct 20 14:54:35 2011] Mean chipx,y = (274.13, 195.51)
[Thu Oct 20 14:54:35 2011] Mean tdetx,y = (4936.49, 3335.13)
[Thu Oct 20 14:54:35 2011] chipx,y range = (247.00-297.00, 167.00-220.00)
[Thu Oct 20 14:54:35 2011] Size of ../../acisf13443/products/events/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 111 counts
[Thu Oct 20 14:54:36 2011] rmf not found, will run specextract
[Thu Oct 20 14:54:36 2011] arf not found, will run specextract
[Thu Oct 20 14:54:59 2011] ../../acisf13443/products/spectra/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2.warf not found
[Thu Oct 20 14:54:59 2011] ../../acisf13443/products/spectra/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2.wrmf not found
[Thu Oct 20 14:54:59 2011] Removal of ../../acisf13443/products/spectra/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2.soff failed
[Thu Oct 20 15:06:53 2011] Keeping rmf generated by specextract
[Thu Oct 20 15:06:53 2011] 154.218
[Thu Oct 20 15:08:02 2011] Updating aperture counts using extracted products
[Thu Oct 20 15:08:02 2011] Error reading totcts from fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Oct 20 15:08:02 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 15:08:02 2011] Using photon index=1.80, rate=0.00177, arf fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2.arf
[Thu Oct 20 15:08:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 15:08:02 2011] Updating source flux to 2.8e-14
[Thu Oct 20 15:08:22 2011] Reading fit data from acisf13443/analysis//spectral/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2_pl.csv
[Thu Oct 20 15:08:22 2011] Spectral fit parameter nH value = 2.50969e+12
[Thu Oct 20 15:08:22 2011] Spectral fit parameter PhoIndex value = 1.78725
[Thu Oct 20 15:08:22 2011] Failed to get F(0.3-8.0) from acisf13443/analysis//spectral/fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 15:08:22 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 15:08:22 2011] Using Nh = 2.5e+12, photon index=1.79, rate=0.00177, arf fullrun_ccd3_acisf13443_pi14-548_pass1_cl_src2.arf
[Thu Oct 20 15:08:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 15:08:22 2011] Updating source flux to 2.9e-14