[Sat Oct  8 02:40:27 2011] Detection parameters:
  Position = (368.6, 305.7) = 1 1 13.52 -21 54 16.5
  Extent = 1.0" x 0.7", rotation angle = 66 degrees
  Source counts = 46.2 +/- 7.7
  Background counts = 13.8
  Rate = 0.0003 +/- 4e-05

[Sat Oct  8 02:40:27 2011] Off-axis axis estimate = 6.20'
[Sat Oct  8 02:42:17 2011] Using EEF radius (= 1.73 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:42:17 2011] Initial guess for spatial extent in simple fitting = 1.73"
[Sat Oct  8 02:42:17 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.992
[Sat Oct  8 02:42:17 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.73"
[Sat Oct  8 02:42:18 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src12.ximg exists
[Sat Oct  8 02:42:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src12.csv
[Sat Oct  8 02:42:18 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Oct  8 02:42:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src12.csv
[Sat Oct  8 02:42:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:42:19 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Oct  8 02:42:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Oct  8 02:42:20 2011] Fit fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Oct  8 02:42:45 2011] Spatial fit model total counts = 58.662000, observed total counts = 59.000000
[Sat Oct  8 02:42:45 2011] Offset between fit and detection position for source 22 = 2.289347 pixels
[Sat Oct  8 02:42:45 2011] 57.217590 total counts/ 6.450090 bgd. counts: snr = 19.989544
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.289347 pixels
  Position = (370.1, 307.4) = 1 1 13.48 -21 54 15.9
  Extent = 1.7 (1.2-2.2)", rotation angle = 0
  Source counts = 50.8 +/- 7.6
  Background counts = 6.5
  Rate = 0.0003 +/- 4e-05
[Sat Oct  8 02:42:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:42:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:42:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:42:45 2011] Source does appear to be extended
[Sat Oct  8 02:42:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:43:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:43:19 2011] Initial guess for spatial extent in simple fitting = 1.68"
[Sat Oct  8 02:43:19 2011] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.917
[Sat Oct  8 02:43:19 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 1.68"
[Sat Oct  8 02:43:19 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src12.ximg exists
[Sat Oct  8 02:43:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src12.csv
[Sat Oct  8 02:43:19 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src12_1.ximg exists
[Sat Oct  8 02:43:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src12.csv
[Sat Oct  8 02:43:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:43:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sat Oct  8 02:43:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Oct  8 02:43:20 2011] Fit fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Oct  8 02:43:41 2011] Spatial fit model total counts = 58.996400, observed total counts = 59.000000
[Sat Oct  8 02:43:41 2011] Offset between fit and detection position for source 22 = 0.625953 pixels
[Sat Oct  8 02:43:41 2011] 58.736000 total counts/ 18.037800 bgd. counts: snr = 9.582601
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.625953 pixels
  Position = (369.6, 307.2) = 1 1 13.50 -21 54 16.1
  Extent = 1.4 (1.1-2.0)", rotation angle = 0
  Source counts = 40.7 +/- 7.7
  Background counts = 18.0
  Rate = 0.0002 +/- 4e-05
[Sat Oct  8 02:43:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:43:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:43:41 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:43:41 2011] Source does appear to be extended
[Sat Oct  8 02:43:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:49:12 2011] Not overwriting source region fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_src.reg
[Sat Oct  8 02:49:12 2011] Extracting stamp from image fullrun_ccd3_acisf13442_pi14-548_cl_sm2.00.img.gz, (305, 242) - (434, 372)
[Sat Oct  8 02:49:12 2011] Writing fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22.gif
[Sat Oct  8 02:49:57 2011] ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_src.evt and ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat Oct  8 02:49:57 2011] Size of ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_src.evt.gz[events] = 58 counts
[Sat Oct  8 02:49:57 2011] Mean chipx,y = (829.72, 267.83)
[Sat Oct  8 02:49:57 2011] Mean tdetx,y = (4864.17, 3890.72)
[Sat Oct  8 02:49:57 2011] chipx,y range = (804.00-854.00, 248.00-289.00)
[Sat Oct  8 02:49:57 2011] Size of ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 151 counts
[Sat Oct  8 02:49:57 2011] ../../acisf13442/products/images/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_src.img and ../../acisf13442/products/images/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat Oct  8 02:49:57 2011] ../../acisf13442/products/spectra/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_src.pi and ../../acisf13442/products/spectra/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat Oct  8 02:49:57 2011] Not generating rmf since there are only 40 counts
[Sat Oct  8 02:50:00 2011] ../../acisf13442/products/lightcurves/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_src.lc and ../../acisf13442/products/lightcurves/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sat Oct  8 02:51:25 2011] 182.404
[Sat Oct  8 02:52:12 2011] Updating aperture counts using extracted products
[Sat Oct  8 02:52:12 2011] Error reading totcts from fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22_src.pi.gz
[Sat Oct  8 02:52:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 02:52:13 2011] Using photon index=1.80, rate=0.00023, arf fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src22.arf
[Sat Oct  8 02:52:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 02:52:13 2011] Updating source flux to 3e-15
[Sat Oct  8 02:53:27 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting