[Sat Oct  8 02:40:26 2011] Detection parameters:
  Position = (520.6, 334.9) = 1 1 8.14 -21 54 2.1
  Extent = 2.5" x 0.9", rotation angle = 60 degrees
  Source counts = 41.7 +/- 7.4
  Background counts = 13.3
  Rate = 0.0002 +/- 4e-05

[Sat Oct  8 02:40:27 2011] Off-axis axis estimate = 6.58'
[Sat Oct  8 02:42:17 2011] Using EEF radius (= 1.94 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:42:17 2011] Initial guess for spatial extent in simple fitting = 1.94"
[Sat Oct  8 02:42:17 2011] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.030
[Sat Oct  8 02:42:17 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 1.94"
[Sat Oct  8 02:42:18 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src15.ximg exists
[Sat Oct  8 02:42:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src15.csv
[Sat Oct  8 02:42:18 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src15_1.ximg exists
[Sat Oct  8 02:42:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src15.csv
[Sat Oct  8 02:42:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:42:21 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sat Oct  8 02:42:21 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Oct  8 02:42:21 2011] Fit fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Oct  8 02:42:45 2011] Spatial fit model total counts = 52.999900, observed total counts = 53.000000
[Sat Oct  8 02:42:45 2011] Offset between fit and detection position for source 2 = 2.826624 pixels
[Sat Oct  8 02:42:45 2011] 52.605500 total counts/ 28.211500 bgd. counts: snr = 4.592720
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.826624 pixels
  Position = (522.6, 336.9) = 1 1 8.09 -21 54 1.4
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 24.4 +/- 7.3
  Background counts = 28.2
  Rate = 0.0001 +/- 4e-05
[Sat Oct  8 02:42:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:42:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:42:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:42:45 2011] Source does appear to be extended
[Sat Oct  8 02:42:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:43:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:43:19 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Oct  8 02:43:19 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.978
[Sat Oct  8 02:43:19 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.62"
[Sat Oct  8 02:43:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src15.ximg exists
[Sat Oct  8 02:43:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src15.csv
[Sat Oct  8 02:43:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src15_1.ximg exists
[Sat Oct  8 02:43:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src15.csv
[Sat Oct  8 02:43:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:43:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sat Oct  8 02:43:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Oct  8 02:43:20 2011] Fit fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Oct  8 02:43:41 2011] Spatial fit model total counts = 41.041300, observed total counts = 41.000000
[Sat Oct  8 02:43:41 2011] Offset between fit and detection position for source 2 = 0.144642 pixels
[Sat Oct  8 02:43:41 2011] 41.069000 total counts/ 19.513400 bgd. counts: snr = 4.879706
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.144642 pixels
  Position = (522.6, 337.1) = 1 1 8.09 -21 54 1.3
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 21.6 +/- 6.4
  Background counts = 19.5
  Rate = 0.0001 +/- 4e-05
[Sat Oct  8 02:43:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:43:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:43:41 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:43:41 2011] Source does appear to be extended
[Sat Oct  8 02:43:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:49:12 2011] Not overwriting source region fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_src.reg
[Sat Oct  8 02:49:12 2011] Extracting stamp from image fullrun_ccd3_acisf13442_pi14-548_cl_sm2.00.img.gz, (499, 313) - (547, 361)
[Sat Oct  8 02:49:12 2011] Writing fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2.gif
[Sat Oct  8 02:50:06 2011] ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_src.evt and ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct  8 02:50:06 2011] Size of ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_src.evt.gz[events] = 27 counts
[Sat Oct  8 02:50:06 2011] Mean chipx,y = (671.74, 264.59)
[Sat Oct  8 02:50:06 2011] Mean tdetx,y = (4867.41, 3732.74)
[Sat Oct  8 02:50:06 2011] chipx,y range = (655.00-692.00, 247.00-282.00)
[Sat Oct  8 02:50:06 2011] Size of ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 22 counts
[Sat Oct  8 02:50:06 2011] ../../acisf13442/products/images/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_src.img and ../../acisf13442/products/images/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct  8 02:50:06 2011] ../../acisf13442/products/spectra/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_src.pi and ../../acisf13442/products/spectra/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct  8 02:50:06 2011] Not generating rmf since there are only 21 counts
[Sat Oct  8 02:50:10 2011] ../../acisf13442/products/lightcurves/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_src.lc and ../../acisf13442/products/lightcurves/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct  8 02:51:25 2011] 178.767
[Sat Oct  8 02:52:12 2011] Updating aperture counts using extracted products
[Sat Oct  8 02:52:12 2011] Error reading totcts from fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct  8 02:52:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 02:52:13 2011] Using photon index=1.80, rate=0.000122, arf fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src2.arf
[Sat Oct  8 02:52:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 02:52:13 2011] Updating source flux to 1.6e-15
[Sat Oct  8 02:53:27 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting