[Sat Oct  8 02:40:27 2011] Detection parameters:
  Position = (548.3, 1101.5) = 1 1 7.18 -21 47 45.0
  Extent = 0.5" x 0.5", rotation angle = 64 degrees
  Source counts = 47.9 +/- 7.1
  Background counts = 3.1
  Rate = 0.0003 +/- 4e-05

[Sat Oct  8 02:40:27 2011] Off-axis axis estimate = 3.97'
[Sat Oct  8 02:42:17 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:42:17 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Sat Oct  8 02:42:17 2011] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.746
[Sat Oct  8 02:42:17 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.82"
[Sat Oct  8 02:42:18 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct  8 02:42:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src11.csv
[Sat Oct  8 02:42:18 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct  8 02:42:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src11.csv
[Sat Oct  8 02:42:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13442_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:42:19 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct  8 02:42:19 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct  8 02:42:19 2011] Fit fullrun_ccd3_acisf13442_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct  8 02:42:45 2011] Spatial fit model total counts = 69.948600, observed total counts = 71.000000
[Sat Oct  8 02:42:45 2011] Offset between fit and detection position for source 19 = 0.465502 pixels
[Sat Oct  8 02:42:45 2011] 70.159640 total counts/ 5.396940 bgd. counts: snr = 27.877328
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.465502 pixels
  Position = (548.5, 1101.9) = 1 1 7.19 -21 47 45.0
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 64.8 +/- 8.4
  Background counts = 5.4
  Rate = 0.0004 +/- 5e-05
[Sat Oct  8 02:42:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:42:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:42:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:42:45 2011] Source does appear to be extended
[Sat Oct  8 02:42:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:43:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:43:19 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Sat Oct  8 02:43:19 2011] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.804
[Sat Oct  8 02:43:19 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.82"
[Sat Oct  8 02:43:19 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct  8 02:43:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src11.csv
[Sat Oct  8 02:43:19 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct  8 02:43:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src11.csv
[Sat Oct  8 02:43:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13442_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:43:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct  8 02:43:20 2011] fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct  8 02:43:20 2011] Fit fullrun_ccd3_acisf13442_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct  8 02:43:41 2011] Spatial fit model total counts = 70.671700, observed total counts = 71.000000
[Sat Oct  8 02:43:41 2011] Offset between fit and detection position for source 19 = 0.025593 pixels
[Sat Oct  8 02:43:41 2011] 70.831770 total counts/ 5.259270 bgd. counts: snr = 28.592953
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.025593 pixels
  Position = (548.5, 1101.9) = 1 1 7.19 -21 47 45.0
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 65.6 +/- 8.4
  Background counts = 5.3
  Rate = 0.0004 +/- 5e-05
[Sat Oct  8 02:43:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:43:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:43:41 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:43:41 2011] Source does appear to be extended
[Sat Oct  8 02:43:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:49:12 2011] Not overwriting source region fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_src.reg
[Sat Oct  8 02:49:12 2011] Extracting stamp from image fullrun_ccd3_acisf13442_pi14-548_cl_sm2.00.img.gz, (511, 1064) - (586, 1139)
[Sat Oct  8 02:49:12 2011] Writing fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19.gif
[Sat Oct  8 02:49:54 2011] ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_src.evt and ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sat Oct  8 02:49:54 2011] Size of ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_src.evt.gz[events] = 69 counts
[Sat Oct  8 02:49:54 2011] Mean chipx,y = (471.46, 1003.32)
[Sat Oct  8 02:49:54 2011] Mean tdetx,y = (4128.68, 3532.46)
[Sat Oct  8 02:49:54 2011] chipx,y range = (455.00-489.00, 986.00-1022.00)
[Sat Oct  8 02:49:54 2011] Size of ../../acisf13442/products/events/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 56 counts
[Sat Oct  8 02:49:54 2011] ../../acisf13442/products/images/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_src.img and ../../acisf13442/products/images/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Sat Oct  8 02:49:54 2011] ../../acisf13442/products/spectra/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_src.pi and ../../acisf13442/products/spectra/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sat Oct  8 02:49:54 2011] Not generating rmf since there are only 65 counts
[Sat Oct  8 02:49:57 2011] ../../acisf13442/products/lightcurves/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_src.lc and ../../acisf13442/products/lightcurves/fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sat Oct  8 02:51:25 2011] 176.123
[Sat Oct  8 02:52:12 2011] Updating aperture counts using extracted products
[Sat Oct  8 02:52:12 2011] Error reading totcts from fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19_src.pi.gz
[Sat Oct  8 02:52:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 02:52:13 2011] Using photon index=1.80, rate=0.000371, arf fullrun_ccd3_acisf13442_pi14-548_pass1_cl_src19.arf
[Sat Oct  8 02:52:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 02:52:13 2011] Updating source flux to 5e-15
[Sat Oct  8 02:53:27 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting