[Sat Oct  8 02:40:24 2011] Detection parameters:
  Position = (909.2, 190.3) = 1 1 2.98 -21 46 54.4
  Extent = 0.7" x 0.6", rotation angle = 102 degrees
  Source counts = 138.6 +/- 12.2
  Background counts = 9.4
  Rate = 0.0008 +/- 7e-05

[Sat Oct  8 02:40:25 2011] Off-axis axis estimate = 5.13'
[Sat Oct  8 02:42:13 2011] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:42:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 02:42:13 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Sat Oct  8 02:42:13 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Sat Oct  8 02:42:13 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.23"
[Sat Oct  8 02:42:14 2011] fullrun_ccd2_acisf13442_pi14-548_cl_pass0_src5.ximg exists
[Sat Oct  8 02:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13442_pi14-548_cl_pass0_src5.csv
[Sat Oct  8 02:42:14 2011] fullrun_ccd2_acisf13442_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Oct  8 02:42:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13442_pi14-548_cl_pass0_src5.csv
[Sat Oct  8 02:42:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13442_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13442_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:42:15 2011] fullrun_ccd2_acisf13442_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct  8 02:42:15 2011] fullrun_ccd2_acisf13442_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct  8 02:42:15 2011] Fit fullrun_ccd2_acisf13442_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Oct  8 02:42:42 2011] Spatial fit model total counts = 147.086000, observed total counts = 148.000000
[Sat Oct  8 02:42:42 2011] Offset between fit and detection position for source 3 = 0.568487 pixels
[Sat Oct  8 02:42:42 2011] 147.352600 total counts/ 30.831600 bgd. counts: snr = 20.984865
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.568487 pixels
  Position = (909.6, 190.6) = 1 1 2.98 -21 46 54.4
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 116.5 +/- 12.1
  Background counts = 30.8
  Rate = 0.0007 +/- 7e-05
[Sat Oct  8 02:42:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:42:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:42:42 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:42:42 2011] Source does appear to be extended
[Sat Oct  8 02:42:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:43:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:43:15 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Sat Oct  8 02:43:15 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Sat Oct  8 02:43:15 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.96"
[Sat Oct  8 02:43:16 2011] fullrun_ccd2_acisf13442_pi14-548_cl_pass1_src4.ximg exists
[Sat Oct  8 02:43:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13442_pi14-548_cl_pass1_src4.csv
[Sat Oct  8 02:43:16 2011] fullrun_ccd2_acisf13442_pi14-548_cl_pass1_src4_1.ximg exists
[Sat Oct  8 02:43:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13442_pi14-548_cl_pass1_src4.csv
[Sat Oct  8 02:43:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13442_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13442_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:43:17 2011] fullrun_ccd2_acisf13442_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sat Oct  8 02:43:17 2011] fullrun_ccd2_acisf13442_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Oct  8 02:43:17 2011] Fit fullrun_ccd2_acisf13442_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Oct  8 02:43:37 2011] Warning, spatial fit 4 centroid is now closest to src. 15
[Sat Oct  8 02:43:37 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:43:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:43:37 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:43:37 2011] Source does appear to be extended
[Sat Oct  8 02:43:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:47:05 2011] Not overwriting source region fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_src.reg
[Sat Oct  8 02:47:05 2011] Extracting stamp from image fullrun_ccd2_acisf13442_pi14-548_cl_sm2.00.img.gz, (866, 147) - (953, 234)
[Sat Oct  8 02:47:05 2011] Writing fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3.gif
[Sat Oct  8 02:47:16 2011] ../../acisf13442/products/events/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_src.evt and ../../acisf13442/products/events/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct  8 02:47:16 2011] Size of ../../acisf13442/products/events/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_src.evt.gz[events] = 145 counts
[Sat Oct  8 02:47:16 2011] Mean chipx,y = (690.08, 991.08)
[Sat Oct  8 02:47:16 2011] Mean tdetx,y = (4052.08, 3395.92)
[Sat Oct  8 02:47:16 2011] chipx,y range = (674.00-713.00, 971.00-1012.00)
[Sat Oct  8 02:47:16 2011] Size of ../../acisf13442/products/events/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 78 counts
[Sat Oct  8 02:47:16 2011] ../../acisf13442/products/images/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_src.img and ../../acisf13442/products/images/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct  8 02:47:16 2011] ../../acisf13442/products/spectra/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_src.pi and ../../acisf13442/products/spectra/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct  8 02:47:21 2011] ../../acisf13442/products/lightcurves/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_src.lc and ../../acisf13442/products/lightcurves/fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct  8 02:49:11 2011] Keeping rmf generated by specextract
[Sat Oct  8 02:49:11 2011] 174.729
[Sat Oct  8 02:52:11 2011] Updating aperture counts using extracted products
[Sat Oct  8 02:52:11 2011] Error reading totcts from fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct  8 02:52:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 02:52:12 2011] Using photon index=1.80, rate=0.00066, arf fullrun_ccd2_acisf13442_pi14-548_pass1_cl_src3.arf
[Sat Oct  8 02:52:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 02:52:12 2011] Updating source flux to 8.9e-15