[Thu May  9 10:06:46 2013] Detection parameters:
  Position = (306.8, 92.2) = 17 45 46.27 -28 59 5.9
  Extent = 0.8" x 0.5", rotation angle = 106 degrees
  Source counts = 22.2 +/- 6.2
  Background counts = 16.8
  Rate = 0.0003 +/- 9e-05

[Thu May  9 10:06:46 2013] Off-axis axis estimate = 3.15'
[Thu May  9 11:43:24 2013] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Thu May  9 11:43:24 2013] Initial guess for spatial extent in simple fitting = 0.61"
[Thu May  9 11:43:24 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.990
[Thu May  9 11:43:24 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 0.61"
[Thu May  9 13:07:52 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src42.ximg exists
[Thu May  9 13:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src42.csv
[Thu May  9 13:07:52 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src42_1.ximg exists
[Thu May  9 13:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src42.csv
[Thu May  9 13:07:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:07:52 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass0_tfrozen_src42.ximg exists
[Thu May  9 13:07:52 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass0_tfrozen_src42_1.ximg exists
[Thu May  9 13:07:52 2013] Fit fullrun_ccd1_acisf13438_pi14-548_cl_pass0_tfrozen_src42 appears to have run properly
[Thu May  9 15:15:03 2013] Source 83 is offset by -0.434573 and 0.706665 pixels which is larger than
2 X fitted extent = 2.048667 x 0.620472, not incorporating fit results
[Thu May  9 15:15:03 2013] Vigneting correction estimate = 1.000000
[Thu May  9 15:15:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 15:15:03 2013] Assessing source extent using major
[Thu May  9 15:15:03 2013] Source does appear to be extended
[Thu May  9 15:15:03 2013] Computing asymmetry using major and minor axis, asym = 1.59
[Thu May  9 15:15:03 2013] Source is asymmetric
[Thu May  9 16:30:35 2013] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Thu May  9 16:30:35 2013] Initial guess for spatial extent in simple fitting = 0.61"
[Thu May  9 16:30:35 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.990
[Thu May  9 16:30:35 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 0.61"
[Thu May  9 17:44:15 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass1_src42.ximg exists
[Thu May  9 17:44:15 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass1_src42_1.ximg exists
[Thu May  9 17:44:15 2013] Fit fullrun_ccd1_acisf13438_pi14-548_cl_pass1_src42 appears to have run properly
[Thu May  9 17:44:15 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src42.ximg exists
[Thu May  9 17:44:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src42.csv
[Thu May  9 17:44:15 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src42_1.ximg exists
[Thu May  9 17:44:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src42.csv
[Thu May  9 17:44:15 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:41:53 2013] Spatial fit model total counts = 80.478600, observed total counts = 74.000000
[Thu May  9 19:41:53 2013] Offset between fit and detection position for source 83 = 0.812843 pixels
[Thu May  9 19:41:53 2013] 82.974800 total counts/ 59.781500 bgd. counts: snr = 2.999709
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.812843 pixels
  Position = (307.3, 91.6) = 17 45 46.27 -28 59 6.5
  Extent = 0.6 (0.4-0.9)" x 0.2 (0.2-0.5)", rotation angle = 0 (345-0) degrees
  Source counts = 23.2 +/- 9.1
  Background counts = 59.8
  Rate = 0.0004 +/- 0.0001
[Thu May  9 19:41:53 2013] Vigneting correction estimate = 1.000000
[Thu May  9 19:41:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 19:41:53 2013] Assessing source extent using major axis lower bound
[Thu May  9 19:41:53 2013] Source does appear to be extended
[Thu May  9 19:41:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.81
[Thu May  9 20:09:42 2013] Writing source region out to fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83_src.reg
[Thu May  9 20:09:42 2013] Extracting stamp from image fullrun_ccd1_acisf13438_pi14-548_cl_sm2.00.img.gz, (281, 65) - (334, 118)
[Thu May  9 20:09:42 2013] Writing fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83.gif
[Thu May  9 20:33:34 2013] Size of ../../acisf13438/products/events/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83_src.evt.gz[events] = 29 counts
[Thu May  9 20:33:34 2013] Mean chipx,y = (300.17, 1008.62)
[Thu May  9 20:33:34 2013] Mean tdetx,y = (4123.38, 4407.17)
[Thu May  9 20:33:34 2013] chipx,y range = (282.00-318.00, 1004.00-1022.00)
[Thu May  9 20:33:34 2013] Size of ../../acisf13438/products/events/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83_bgd.evt.gz[events] = 136 counts
[Thu May  9 20:33:35 2013] Not generating rmf since there are only 23 counts
[Thu May  9 20:33:35 2013] arf not found, will run specextract
[Thu May  9 20:34:02 2013] ../../acisf13438/products/spectra/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83.warf not found
[Thu May  9 20:34:02 2013] ../../acisf13438/products/spectra/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83.wrmf not found
[Thu May  9 20:34:02 2013] Removal of ../../acisf13438/products/spectra/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83.soff failed
[Thu May  9 20:49:01 2013] Spectrum 83 has only 23 counts, deleting rmf
[Thu May  9 20:49:01 2013] 103.65
[Thu May  9 22:03:01 2013] Updating aperture counts using extracted products
[Thu May  9 22:03:01 2013] Total counts from fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83_src.pi.gz = 29.00
[Thu May  9 22:03:01 2013] Total counts from fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83_bgd.pi.gz = 136.00
[Thu May  9 22:03:01 2013] Got source and background scale factors 0.000000, 0.000012
[Thu May  9 22:03:01 2013] User source parameters:
  Position = (307.3, 91.6) = 17 45 46.27 -28 59 6.5
  Extent = 0.6 (0.4-0.9)" x 0.2 (0.2-0.5)", rotation angle = 0 (345-0) degrees
  Source aperture counts = 24.3 +/- 6.5
  Background aperture counts = 4.7
  Rate = 0.0004 +/- 0.0001

[Thu May  9 22:03:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 22:03:05 2013] Using photon index=1.80, rate=0.00035, arf fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src83.arf
[Thu May  9 22:03:05 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  9 22:03:05 2013] Updating source flux to 1e-14
[Thu May  9 22:04:36 2013] Flag b found in src. 83 procflags, skipping spectral fitting
[Thu May  9 22:04:36 2013] Source 83 has fewer than 100.000000 counts, skipping spectral fitting