[Thu May  9 10:06:45 2013] Detection parameters:
  Position = (432.4, 195.1) = 17 45 41.57 -28 58 15.3
  Extent = 0.6" x 0.5", rotation angle = 167 degrees
  Source counts = 230.3 +/- 15.7
  Background counts = 15.7
  Rate = 0.003 +/- 0.0002

[Thu May  9 10:06:46 2013] Off-axis axis estimate = 4.18'
[Thu May  9 11:43:24 2013] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Thu May  9 11:43:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 11:43:24 2013] Initial guess for spatial extent in simple fitting = 0.88"
[Thu May  9 11:43:24 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.947
[Thu May  9 11:43:24 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.88"
[Thu May  9 13:07:51 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src1.ximg exists
[Thu May  9 13:07:51 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src1_1.ximg exists
[Thu May  9 13:07:51 2013] Fit fullrun_ccd1_acisf13438_pi14-548_cl_pass0_src1 appears to have run properly
[Thu May  9 13:07:52 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu May  9 13:07:52 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  9 13:07:52 2013] Fit fullrun_ccd1_acisf13438_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May  9 15:15:03 2013] Spatial fit model total counts = 267.510000, observed total counts = 265.000000
[Thu May  9 15:15:03 2013] Offset between fit and detection position for source 1 = 0.852490 pixels
[Thu May  9 15:15:03 2013] 268.568700 total counts/ 34.996700 bgd. counts: snr = 39.482735
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.852490 pixels
  Position = (433.1, 195.5) = 17 45 41.56 -28 58 15.3
  Extent = 1.1 (1.0-1.2)" x 0.5 (0.5-0.6)", rotation angle = 7 (2-14) degrees
  Source counts = 233.6 +/- 16.4
  Background counts = 35.0
  Rate = 0.004 +/- 0.0002
[Thu May  9 15:15:03 2013] Vigneting correction estimate = 1.000000
[Thu May  9 15:15:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 15:15:03 2013] Assessing source extent using major axis lower bound
[Thu May  9 15:15:03 2013] Source does appear to be extended
[Thu May  9 15:15:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.64
[Thu May  9 15:15:03 2013] Source is asymmetric
[Thu May  9 16:30:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 16:30:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 16:30:35 2013] Initial guess for spatial extent in simple fitting = 0.80"
[Thu May  9 16:30:35 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.114
[Thu May  9 16:30:35 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.80"
[Thu May  9 17:44:14 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass1_src1.ximg exists
[Thu May  9 17:44:14 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass1_src1_1.ximg exists
[Thu May  9 17:44:14 2013] Fit fullrun_ccd1_acisf13438_pi14-548_cl_pass1_src1 appears to have run properly
[Thu May  9 17:44:15 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu May  9 17:44:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu May  9 17:44:15 2013] fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  9 17:44:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu May  9 17:44:15 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13438_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:41:53 2013] Spatial fit model total counts = 273.182000, observed total counts = 270.000000
[Thu May  9 19:41:53 2013] Offset between fit and detection position for source 1 = 0.062992 pixels
[Thu May  9 19:41:53 2013] 274.716800 total counts/ 39.284800 bgd. counts: snr = 37.562390
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.062992 pixels
  Position = (433.2, 195.5) = 17 45 41.55 -28 58 15.3
  Extent = 1.1 (1.0-1.3)" x 0.5 (0.4-0.6)", rotation angle = 6 (1-13) degrees
  Source counts = 235.4 +/- 16.6
  Background counts = 39.3
  Rate = 0.004 +/- 0.0003
[Thu May  9 19:41:53 2013] Vigneting correction estimate = 1.000000
[Thu May  9 19:41:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 19:41:53 2013] Assessing source extent using major axis lower bound
[Thu May  9 19:41:53 2013] Source does appear to be extended
[Thu May  9 19:41:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.71
[Thu May  9 19:41:53 2013] Source is asymmetric
[Thu May  9 20:09:41 2013] Writing source region out to fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1_src.reg
[Thu May  9 20:09:41 2013] Extracting stamp from image fullrun_ccd1_acisf13438_pi14-548_cl_sm2.00.img.gz, (382, 144) - (485, 247)
[Thu May  9 20:09:41 2013] Writing fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1.gif
[Thu May  9 20:09:44 2013] Size of ../../acisf13438/products/events/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1_src.evt.gz[events] = 253 counts
[Thu May  9 20:09:44 2013] Mean chipx,y = (414.75, 905.28)
[Thu May  9 20:09:44 2013] Mean tdetx,y = (4226.72, 4521.75)
[Thu May  9 20:09:44 2013] chipx,y range = (394.00-433.00, 886.00-925.00)
[Thu May  9 20:09:44 2013] Size of ../../acisf13438/products/events/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 394 counts
[Thu May  9 20:09:46 2013] rmf not found, will run specextract
[Thu May  9 20:09:46 2013] arf not found, will run specextract
[Thu May  9 20:10:12 2013] ../../acisf13438/products/spectra/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1.warf not found
[Thu May  9 20:10:12 2013] ../../acisf13438/products/spectra/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1.wrmf not found
[Thu May  9 20:10:12 2013] Removal of ../../acisf13438/products/spectra/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1.soff failed
[Thu May  9 20:49:00 2013] Keeping rmf generated by specextract
[Thu May  9 20:49:00 2013] 176.983
[Thu May  9 22:02:55 2013] Updating aperture counts using extracted products
[Thu May  9 22:02:55 2013] Total counts from fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1_src.pi.gz = 253.00
[Thu May  9 22:02:55 2013] Total counts from fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1_bgd.pi.gz = 394.00
[Thu May  9 22:02:55 2013] Got source and background scale factors 0.000002, 0.000042
[Thu May  9 22:02:55 2013] User source parameters:
  Position = (433.2, 195.5) = 17 45 41.55 -28 58 15.3
  Extent = 1.1 (1.0-1.3)" x 0.5 (0.4-0.6)", rotation angle = 6 (1-13) degrees
  Source aperture counts = 236.3 +/- 16.9
  Background aperture counts = 16.7
  Rate = 0.004 +/- 0.0003

[Thu May  9 22:03:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 22:03:05 2013] Using photon index=1.80, rate=0.00356, arf fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1.arf
[Thu May  9 22:03:05 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  9 22:03:05 2013] Updating source flux to 6.1e-14
[Thu May  9 22:05:03 2013] Reading fit data from acisf13438/analysis//spectral/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1_pl.csv
[Thu May  9 22:05:03 2013] Spectral fit parameter nH value = 1.53419e+22
[Thu May  9 22:05:03 2013] Spectral fit parameter PhoIndex value = 0.185715
[Thu May  9 22:05:03 2013] Failed to get F(0.3-8.0) from acisf13438/analysis//spectral/fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May  9 22:05:03 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 22:05:03 2013] Using Nh = 1.5e+22, photon index=0.19, rate=0.00356, arf fullrun_ccd1_acisf13438_pi14-548_pass1_cl_src1.arf
[Thu May  9 22:05:03 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  9 22:05:03 2013] Updating source flux to 1.2e-13