[Sun Jan 13 02:58:46 2013] Detection parameters:
  Position = (592.4, 1184.1) = 17 20 1.59 -35 59 24.7
  Extent = 3.4" x 2.2", rotation angle = 20 degrees
  Source counts = 20.4 +/- 6.0
  Background counts = 15.6
  Rate = 0.0003 +/- 0.0001

[Sun Jan 13 02:58:49 2013] Off-axis axis estimate = 9.92'
[Sun Jan 13 05:28:33 2013] Using EEF radius (= 4.36 ")to estimate initial spatial extent for simple fitting
[Sun Jan 13 05:28:33 2013] Initial guess for spatial extent in simple fitting = 4.36"
[Sun Jan 13 05:28:33 2013] source mask rpix=8.9, npix_max = 350, mask sum = 342, frac = 0.975
[Sun Jan 13 05:28:33 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 4.36"
[Sun Jan 13 07:42:01 2013] fullrun_ccd3_acisf13436_pi14-548_cl_pass0_src60.ximg exists
[Sun Jan 13 07:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13436_pi14-548_cl_pass0_src60.csv
[Sun Jan 13 07:42:01 2013] fullrun_ccd3_acisf13436_pi14-548_cl_pass0_src60_1.ximg exists
[Sun Jan 13 07:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13436_pi14-548_cl_pass0_src60.csv
[Sun Jan 13 07:42:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13436_pi14-548_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13436_pi14-548_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 13 07:42:02 2013] fullrun_ccd3_acisf13436_pi14-548_cl_pass0_tfrozen_src60.ximg exists
[Sun Jan 13 07:42:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13436_pi14-548_cl_pass0_tfrozen_src60.csv
[Sun Jan 13 07:42:02 2013] fullrun_ccd3_acisf13436_pi14-548_cl_pass0_tfrozen_src60_1.ximg exists
[Sun Jan 13 07:42:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13436_pi14-548_cl_pass0_tfrozen_src60.csv
[Sun Jan 13 07:42:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13436_pi14-548_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13436_pi14-548_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 13 09:02:35 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 42.943374 pixels away
[Sun Jan 13 09:02:35 2013] Vigneting correction estimate = 1.000000
[Sun Jan 13 09:02:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 13 09:02:35 2013] Assessing source extent using major
[Sun Jan 13 09:02:35 2013] Source does appear to be extended
[Sun Jan 13 09:02:35 2013] Computing asymmetry using major and minor axis, asym = 1.51
[Sun Jan 13 09:02:35 2013] Source is asymmetric
[Sun Jan 13 11:23:08 2013] Using EEF radius (= 4.36 ")to estimate initial spatial extent for simple fitting
[Sun Jan 13 11:23:08 2013] Initial guess for spatial extent in simple fitting = 4.36"
[Sun Jan 13 11:23:08 2013] source mask rpix=8.9, npix_max = 350, mask sum = 342, frac = 0.975
[Sun Jan 13 11:23:08 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 4.36"
[Sun Jan 13 13:26:49 2013] fullrun_ccd3_acisf13436_pi14-548_cl_pass1_src60.ximg exists
[Sun Jan 13 13:26:49 2013] fullrun_ccd3_acisf13436_pi14-548_cl_pass1_src60_1.ximg exists
[Sun Jan 13 13:26:49 2013] Fit fullrun_ccd3_acisf13436_pi14-548_cl_pass1_src60 appears to have run properly
[Sun Jan 13 13:26:50 2013] fullrun_ccd3_acisf13436_pi14-548_cl_pass1_tfrozen_src60.ximg exists
[Sun Jan 13 13:26:50 2013] fullrun_ccd3_acisf13436_pi14-548_cl_pass1_tfrozen_src60_1.ximg exists
[Sun Jan 13 13:26:50 2013] Fit fullrun_ccd3_acisf13436_pi14-548_cl_pass1_tfrozen_src60 appears to have run properly
[Sun Jan 13 14:17:27 2013] Spatial fit model total counts = 86.229500, observed total counts = 88.000000
[Sun Jan 13 14:17:27 2013] Offset between fit and detection position for source 77 = 5.368214 pixels
[Sun Jan 13 14:17:27 2013] 85.797300 total counts/ 19.075700 bgd. counts: snr = 15.276583
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 5.368214 pixels
  Position = (591.6, 1189.4) = 17 20 1.65 -35 59 22.3
  Extent = 8.7 (5.5-17.4)" x 3.7 (2.3-5.9)", rotation angle = 329 (311-347) degrees
  Source counts = 66.7 +/- 9.3
  Background counts = 19.1
  Rate = 0.001 +/- 0.0001
[Sun Jan 13 14:17:27 2013] Vigneting correction estimate = 1.000000
[Sun Jan 13 14:17:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 13 14:17:27 2013] Assessing source extent using major axis lower bound
[Sun Jan 13 14:17:27 2013] Source does appear to be extended
[Sun Jan 13 14:17:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Sun Jan 13 15:43:11 2013] Writing source region out to fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77_src.reg
[Sun Jan 13 15:43:11 2013] Extracting stamp from image fullrun_ccd3_acisf13436_pi14-548_cl_sm2.00.img.gz, (193, 790) - (990, 1305)
[Sun Jan 13 15:43:11 2013] Writing fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77.gif
[Sun Jan 13 16:16:49 2013] Size of ../../acisf13436/products/events/fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77_src.evt.gz[events] = 126 counts
[Sun Jan 13 16:16:49 2013] Mean chipx,y = (282.23, 21.28)
[Sun Jan 13 16:16:49 2013] Mean tdetx,y = (5110.72, 3343.23)
[Sun Jan 13 16:16:49 2013] chipx,y range = (209.00-347.00, 3.00-58.00)
[Sun Jan 13 16:16:49 2013] Size of ../../acisf13436/products/events/fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77_bgd.evt.gz[events] = 1521 counts
[Sun Jan 13 16:16:50 2013] Not generating rmf since there are only 66 counts
[Sun Jan 13 16:16:50 2013] arf not found, will run specextract
[Sun Jan 13 16:16:58 2013] ../../acisf13436/products/spectra/fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77.warf not found
[Sun Jan 13 16:16:58 2013] ../../acisf13436/products/spectra/fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77.wrmf not found
[Sun Jan 13 16:16:58 2013] Removal of ../../acisf13436/products/spectra/fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77.soff failed
[Sun Jan 13 16:57:57 2013] Spectrum 77 has only 67 counts, deleting rmf
[Sun Jan 13 16:57:57 2013] 151.543
[Sun Jan 13 17:01:55 2013] Updating aperture counts using extracted products
[Sun Jan 13 17:01:55 2013] Error reading totcts from fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77_src.pi.gz
[Sun Jan 13 17:01:57 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jan 13 17:01:57 2013] Using photon index=1.80, rate=0.00106, arf fullrun_ccd3_acisf13436_pi14-548_pass1_cl_src77.arf
[Sun Jan 13 17:01:57 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jan 13 17:01:57 2013] Updating source flux to 2.1e-14
[Sun Jan 13 17:02:43 2013] Source 77 has fewer than 100.000000 counts, skipping spectral fitting