[Sun Jan 13 02:58:39 2013] Detection parameters:
  Position = (1196.0, 907.7) = 17 19 50.10 -36 9 49.8
  Extent = 0.5" x 0.5", rotation angle = 89 degrees
  Source counts = 59.2 +/- 7.8
  Background counts = 1.8
  Rate = 0.0009 +/- 0.0001

[Sun Jan 13 02:58:40 2013] Off-axis axis estimate = 0.92'
[Sun Jan 13 04:50:46 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Jan 13 04:50:46 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Jan 13 04:50:46 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Sun Jan 13 04:50:46 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.38"
[Sun Jan 13 05:28:25 2013] fullrun_ccd2_acisf13436_pi14-548_cl_pass0_src8.ximg exists
[Sun Jan 13 05:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13436_pi14-548_cl_pass0_src8.csv
[Sun Jan 13 05:28:25 2013] fullrun_ccd2_acisf13436_pi14-548_cl_pass0_src8_1.ximg exists
[Sun Jan 13 05:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13436_pi14-548_cl_pass0_src8.csv
[Sun Jan 13 05:28:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13436_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13436_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 13 05:28:29 2013] fullrun_ccd2_acisf13436_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sun Jan 13 05:28:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13436_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun Jan 13 05:28:29 2013] fullrun_ccd2_acisf13436_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jan 13 05:28:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13436_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun Jan 13 05:28:29 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13436_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13436_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 13 09:02:22 2013] Spatial fit model total counts = 65.767000, observed total counts = 78.000000
[Sun Jan 13 09:02:22 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jan 13 09:02:22 2013] Vigneting correction estimate = 1.000000
[Sun Jan 13 09:02:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 13 09:02:22 2013] Assessing source extent using major
[Sun Jan 13 09:02:22 2013] Source does appear to be extended
[Sun Jan 13 09:02:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 13 10:44:35 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Jan 13 10:44:35 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Jan 13 10:44:35 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Sun Jan 13 10:44:35 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.38"
[Sun Jan 13 11:23:08 2013] fullrun_ccd2_acisf13436_pi14-548_cl_pass1_src8.ximg exists
[Sun Jan 13 11:23:08 2013] fullrun_ccd2_acisf13436_pi14-548_cl_pass1_src8_1.ximg exists
[Sun Jan 13 11:23:08 2013] Fit fullrun_ccd2_acisf13436_pi14-548_cl_pass1_src8 appears to have run properly
[Sun Jan 13 11:23:08 2013] fullrun_ccd2_acisf13436_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sun Jan 13 11:23:08 2013] fullrun_ccd2_acisf13436_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jan 13 11:23:08 2013] Fit fullrun_ccd2_acisf13436_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Jan 13 14:17:14 2013] Spatial fit model total counts = 76.784800, observed total counts = 78.000000
[Sun Jan 13 14:17:14 2013] Offset between fit and detection position for source 4 = 0.812648 pixels
[Sun Jan 13 14:17:14 2013] 74.619900 total counts/ 16.535900 bgd. counts: snr = 14.283762
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.812648 pixels
  Position = (1196.6, 908.3) = 17 19 50.10 -36 9 49.7
  Extent = 0.5 (0.4-0.6)" x 0.3 (0.3-0.4)", rotation angle = 75 (48-104) degrees
  Source counts = 58.1 +/- 8.6
  Background counts = 16.5
  Rate = 0.0009 +/- 0.0001
[Sun Jan 13 14:17:14 2013] Vigneting correction estimate = 1.000000
[Sun Jan 13 14:17:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 13 14:17:14 2013] Assessing source extent using major axis lower bound
[Sun Jan 13 14:17:14 2013] Source does appear to be extended
[Sun Jan 13 14:17:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Sun Jan 13 15:15:06 2013] Writing source region out to fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4_src.reg
[Sun Jan 13 15:15:06 2013] Extracting stamp from image fullrun_ccd2_acisf13436_pi14-548_cl_sm2.00.img.gz, (1175, 887) - (1218, 929)
[Sun Jan 13 15:15:06 2013] Writing fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4.gif
[Sun Jan 13 15:19:36 2013] Size of ../../acisf13436/products/events/fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4_src.evt.gz[events] = 61 counts
[Sun Jan 13 15:19:36 2013] Mean chipx,y = (77.33, 933.75)
[Sun Jan 13 15:19:36 2013] Mean tdetx,y = (3994.75, 4008.67)
[Sun Jan 13 15:19:36 2013] chipx,y range = (58.00-97.00, 916.00-955.00)
[Sun Jan 13 15:19:36 2013] Size of ../../acisf13436/products/events/fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 30 counts
[Sun Jan 13 15:19:38 2013] Not generating rmf since there are only 58 counts
[Sun Jan 13 15:19:38 2013] arf not found, will run specextract
[Sun Jan 13 15:20:08 2013] ../../acisf13436/products/spectra/fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4.warf not found
[Sun Jan 13 15:20:08 2013] ../../acisf13436/products/spectra/fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4.wrmf not found
[Sun Jan 13 15:20:08 2013] Removal of ../../acisf13436/products/spectra/fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4.soff failed
[Sun Jan 13 15:43:09 2013] Spectrum 4 has only 58 counts, deleting rmf
[Sun Jan 13 15:43:09 2013] 201.536
[Sun Jan 13 17:01:53 2013] Updating aperture counts using extracted products
[Sun Jan 13 17:01:53 2013] Error reading totcts from fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Jan 13 17:01:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jan 13 17:01:54 2013] Using photon index=1.80, rate=0.000925, arf fullrun_ccd2_acisf13436_pi14-548_pass1_cl_src4.arf
[Sun Jan 13 17:01:54 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jan 13 17:01:54 2013] Updating source flux to 1.4e-14
[Sun Jan 13 17:02:24 2013] Flag p found in src. 4 procflags, skipping spectral fitting
[Sun Jan 13 17:02:24 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting