[Fri May 24 01:07:52 2013] Detection parameters:
  Position = (324.6, 404.1) = 20 34 55.60 60 9 31.1
  Extent = 0.9" x 0.7", rotation angle = 115 degrees
  Source counts = 18.4 +/- 4.5
  Background counts = 1.6
  Rate = 0.0009 +/- 0.0002

[Fri May 24 01:07:53 2013] Off-axis axis estimate = 2.78'
[Fri May 24 01:27:39 2013] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Fri May 24 01:27:39 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Fri May 24 01:27:39 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.883
[Fri May 24 01:27:39 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 0.54"
[Fri May 24 02:02:16 2013] fullrun_ccd6_acisf13435_pi14-548_cl_pass0_src13.ximg exists
[Fri May 24 02:02:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13435_pi14-548_cl_pass0_src13.csv
[Fri May 24 02:02:16 2013] fullrun_ccd6_acisf13435_pi14-548_cl_pass0_src13_1.ximg exists
[Fri May 24 02:02:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13435_pi14-548_cl_pass0_src13.csv
[Fri May 24 02:02:16 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13435_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13435_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 02:02:16 2013] fullrun_ccd6_acisf13435_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri May 24 02:02:16 2013] fullrun_ccd6_acisf13435_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 24 02:02:16 2013] Fit fullrun_ccd6_acisf13435_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri May 24 02:19:06 2013] Spatial fit model total counts = 16.527700, observed total counts = 21.000000
[Fri May 24 02:19:06 2013] Offset between fit and detection position for source 11 = 0.371688 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.371688 pixels
  Position = (324.6, 404.5) = 20 34 55.63 60 9 31.1
  Extent = 1.4 (1.2-1.5)" x 0.6 (0.4-0.9)", rotation angle = 72 (54-90) degrees
  Source counts = 18.1 +/- 4.3
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Fri May 24 02:19:06 2013] Vigneting correction estimate = 1.000000
[Fri May 24 02:19:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 02:19:06 2013] Assessing source extent using major axis lower bound
[Fri May 24 02:19:06 2013] Source does appear to be extended
[Fri May 24 02:19:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.34
[Fri May 24 02:37:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 02:37:21 2013] Initial guess for spatial extent in simple fitting = 1.01"
[Fri May 24 02:37:21 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.966
[Fri May 24 02:37:21 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 1.01"
[Fri May 24 03:07:55 2013] fullrun_ccd6_acisf13435_pi14-548_cl_pass1_src13.ximg exists
[Fri May 24 03:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13435_pi14-548_cl_pass1_src13.csv
[Fri May 24 03:07:55 2013] fullrun_ccd6_acisf13435_pi14-548_cl_pass1_src13_1.ximg exists
[Fri May 24 03:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13435_pi14-548_cl_pass1_src13.csv
[Fri May 24 03:07:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13435_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13435_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 03:07:56 2013] fullrun_ccd6_acisf13435_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri May 24 03:07:56 2013] fullrun_ccd6_acisf13435_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 24 03:07:56 2013] Fit fullrun_ccd6_acisf13435_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri May 24 03:24:15 2013] Spatial fit model total counts = 16.514100, observed total counts = 21.000000
[Fri May 24 03:24:15 2013] Offset between fit and detection position for source 11 = 0.052621 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.052621 pixels
  Position = (324.5, 404.5) = 20 34 55.63 60 9 31.1
  Extent = 1.4 (1.0-2.0)" x 0.6 (0.4-0.8)", rotation angle = 71 (54-87) degrees
  Source counts = 18.1 +/- 4.3
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Fri May 24 03:24:15 2013] Vigneting correction estimate = 1.000000
[Fri May 24 03:24:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 03:24:15 2013] Assessing source extent using major axis lower bound
[Fri May 24 03:24:15 2013] Source does appear to be extended
[Fri May 24 03:24:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Fri May 24 03:26:11 2013] Writing source region out to fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11_src.reg
[Fri May 24 03:26:11 2013] Extracting stamp from image fullrun_ccd6_acisf13435_pi14-548_cl_sm2.00.img.gz, (260, 340) - (389, 469)
[Fri May 24 03:26:11 2013] Writing fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11.gif
[Fri May 24 03:34:08 2013] Size of ../../acisf13435/products/events/fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11_src.evt.gz[events] = 20 counts
[Fri May 24 03:34:08 2013] Mean chipx,y = (956.95, 691.50)
[Fri May 24 03:34:08 2013] Mean tdetx,y = (3831.95, 2393.50)
[Fri May 24 03:34:08 2013] chipx,y range = (938.00-976.00, 674.00-711.00)
[Fri May 24 03:34:08 2013] Size of ../../acisf13435/products/events/fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 52 counts
[Fri May 24 03:34:10 2013] Not generating rmf since there are only 18 counts
[Fri May 24 03:34:10 2013] arf not found, will run specextract
[Fri May 24 03:34:39 2013] ../../acisf13435/products/spectra/fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11.warf not found
[Fri May 24 03:34:39 2013] ../../acisf13435/products/spectra/fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11.wrmf not found
[Fri May 24 03:34:39 2013] Removal of ../../acisf13435/products/spectra/fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11.soff failed
[Fri May 24 03:39:58 2013] Spectrum 11 has only 18 counts, deleting rmf
[Fri May 24 03:39:58 2013] 206.545
[Fri May 24 03:47:04 2013] Updating aperture counts using extracted products
[Fri May 24 03:47:04 2013] Total counts from fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11_src.pi.gz = 20.00
[Fri May 24 03:47:04 2013] Total counts from fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11_bgd.pi.gz = 52.00
[Fri May 24 03:47:04 2013] Got source and background scale factors 0.000003, 0.000070
[Fri May 24 03:47:04 2013] User source parameters:
  Position = (324.5, 404.5) = 20 34 55.63 60 9 31.1
  Extent = 1.4 (1.0-2.0)" x 0.6 (0.4-0.8)", rotation angle = 71 (54-87) degrees
  Source aperture counts = 18.1 +/- 5.6
  Background aperture counts = 1.9
  Rate = 0.0009 +/- 0.0003

[Fri May 24 03:47:06 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 03:47:06 2013] Using photon index=1.80, rate=0.000887, arf fullrun_ccd6_acisf13435_pi14-548_pass1_cl_src11.arf
[Fri May 24 03:47:06 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 24 03:47:06 2013] Updating source flux to 9.5e-15
[Fri May 24 03:47:12 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting