[Tue May 14 15:56:07 2013] Detection parameters:
  Position = (786.6, 314.6) = 3 44 31.24 32 0 13.4
  Extent = 3.0" x 1.2", rotation angle = 15 degrees
  Source counts = 17.5 +/- 4.5
  Background counts = 2.5
  Rate = 0.002 +/- 0.0004

[Tue May 14 15:56:07 2013] Off-axis axis estimate = 8.52'
[Tue May 14 17:13:57 2013] Using EEF radius (= 3.21 ")to estimate initial spatial extent for simple fitting
[Tue May 14 17:13:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 17:13:57 2013] Initial guess for spatial extent in simple fitting = 3.21"
[Tue May 14 17:13:57 2013] source mask rpix=6.5, npix_max = 196, mask sum = 196, frac = 0.996
[Tue May 14 17:13:57 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 3.21"
[Tue May 14 18:00:08 2013] fullrun_ccd3_acisf13433_pi14-548_cl_pass0_src27.ximg exists
[Tue May 14 18:00:08 2013] fullrun_ccd3_acisf13433_pi14-548_cl_pass0_src27_1.ximg exists
[Tue May 14 18:00:08 2013] Fit fullrun_ccd3_acisf13433_pi14-548_cl_pass0_src27 appears to have run properly
[Tue May 14 18:00:08 2013] fullrun_ccd3_acisf13433_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Tue May 14 18:00:08 2013] fullrun_ccd3_acisf13433_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Tue May 14 18:00:08 2013] Fit fullrun_ccd3_acisf13433_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Tue May 14 18:00:22 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 36.293225 pixels away
[Tue May 14 18:00:22 2013] Vigneting correction estimate = 1.000000
[Tue May 14 18:00:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 18:00:22 2013] Assessing source extent using major
[Tue May 14 18:00:22 2013] Source does appear to be extended
[Tue May 14 18:00:22 2013] Computing asymmetry using major and minor axis, asym = 2.44
[Tue May 14 18:00:22 2013] Source is asymmetric
[Tue May 14 19:12:43 2013] Using EEF radius (= 3.21 ")to estimate initial spatial extent for simple fitting
[Tue May 14 19:12:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 19:12:43 2013] Initial guess for spatial extent in simple fitting = 3.21"
[Tue May 14 19:12:43 2013] source mask rpix=6.5, npix_max = 196, mask sum = 196, frac = 0.996
[Tue May 14 19:12:43 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 3.21"
[Tue May 14 19:52:52 2013] fullrun_ccd3_acisf13433_pi14-548_cl_pass1_src27.ximg exists
[Tue May 14 19:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13433_pi14-548_cl_pass1_src27.csv
[Tue May 14 19:52:52 2013] fullrun_ccd3_acisf13433_pi14-548_cl_pass1_src27_1.ximg exists
[Tue May 14 19:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13433_pi14-548_cl_pass1_src27.csv
[Tue May 14 19:52:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13433_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13433_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 19:52:53 2013] fullrun_ccd3_acisf13433_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Tue May 14 19:52:53 2013] fullrun_ccd3_acisf13433_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Tue May 14 19:52:53 2013] Fit fullrun_ccd3_acisf13433_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Tue May 14 19:53:07 2013] Spatial fit model total counts = 18.858700, observed total counts = 21.000000
[Tue May 14 19:53:07 2013] Offset between fit and detection position for source 36 = 1.111949 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 1.111949 pixels
  Position = (787.1, 315.6) = 3 44 31.24 32 0 13.6
  Extent = 3.2 (2.3-4.9)" x 1.5 (1.0-2.0)", rotation angle = 347 (319-3) degrees
  Source counts = 18.6 +/- 4.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Tue May 14 19:53:07 2013] Vigneting correction estimate = 1.000000
[Tue May 14 19:53:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 19:53:07 2013] Assessing source extent using major axis lower bound
[Tue May 14 19:53:07 2013] Source does appear to be extended
[Tue May 14 19:53:07 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Tue May 14 20:34:56 2013] Writing source region out to fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36_src.reg
[Tue May 14 20:34:56 2013] Extracting stamp from image fullrun_ccd3_acisf13433_pi14-548_cl_sm2.00.img.gz, (641, 169) - (934, 462)
[Tue May 14 20:34:56 2013] Writing fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36.gif
[Tue May 14 20:51:04 2013] Size of ../../acisf13433/products/events/fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36_src.evt.gz[events] = 18 counts
[Tue May 14 20:51:04 2013] Mean chipx,y = (157.61, 345.50)
[Tue May 14 20:51:04 2013] Mean tdetx,y = (4786.50, 3218.61)
[Tue May 14 20:51:04 2013] chipx,y range = (142.00-174.00, 328.00-380.00)
[Tue May 14 20:51:04 2013] Size of ../../acisf13433/products/events/fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 65 counts
[Tue May 14 20:51:06 2013] Not generating rmf since there are only 18 counts
[Tue May 14 20:51:06 2013] arf not found, will run specextract
[Tue May 14 20:51:29 2013] ../../acisf13433/products/spectra/fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36.warf not found
[Tue May 14 20:51:29 2013] ../../acisf13433/products/spectra/fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36.wrmf not found
[Tue May 14 20:51:29 2013] Removal of ../../acisf13433/products/spectra/fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36.soff failed
[Tue May 14 20:59:16 2013] Spectrum 36 has only 19 counts, deleting rmf
[Tue May 14 20:59:16 2013] 163.697
[Tue May 14 20:59:34 2013] Updating aperture counts using extracted products
[Tue May 14 20:59:34 2013] Total counts from fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36_src.pi.gz = 18.00
[Tue May 14 20:59:34 2013] Total counts from fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36_bgd.pi.gz = 65.00
[Tue May 14 20:59:34 2013] Got source and background scale factors 0.000014, 0.000376
[Tue May 14 20:59:34 2013] User source parameters:
  Position = (787.1, 315.6) = 3 44 31.24 32 0 13.6
  Extent = 3.2 (2.3-4.9)" x 1.5 (1.0-2.0)", rotation angle = 347 (319-3) degrees
  Source aperture counts = 15.5 +/- 5.3
  Background aperture counts = 2.5
  Rate = 0.001 +/- 0.0005

[Tue May 14 20:59:36 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 20:59:36 2013] Using photon index=1.80, rate=0.00172, arf fullrun_ccd3_acisf13433_pi14-548_pass1_cl_src36.arf
[Tue May 14 20:59:36 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May 14 20:59:36 2013] Updating source flux to 2.4e-14
[Tue May 14 20:59:58 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting