[Thu May  2 05:59:00 2013] Detection parameters:
  Position = (970.3, 938.0) = 3 44 21.26 32 5 2.1
  Extent = 0.6" x 0.5", rotation angle = 23 degrees
  Source counts = 24.7 +/- 5.0
  Background counts = 0.3
  Rate = 0.002 +/- 0.0005

[Thu May  2 05:59:01 2013] Off-axis axis estimate = 4.12'
[Thu May  2 07:12:20 2013] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Thu May  2 07:12:20 2013] Initial guess for spatial extent in simple fitting = 0.87"
[Thu May  2 07:12:20 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Thu May  2 07:12:20 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 0.87"
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src21.ximg exists
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src21_1.ximg exists
[Thu May  2 07:47:46 2013] Fit fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src21 appears to have run properly
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Thu May  2 07:47:46 2013] Fit fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Thu May  2 07:48:00 2013] Spatial fit model total counts = 26.041000, observed total counts = 28.000000
[Thu May  2 07:48:00 2013] Offset between fit and detection position for source 9 = 0.791442 pixels
[Thu May  2 07:48:00 2013] 25.538680 total counts/ 2.199880 bgd. counts: snr = 15.735445
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.791442 pixels
  Position = (970.9, 938.6) = 3 44 21.26 32 5 2.2
  Extent = 0.7 (0.6-1.1)" x 0.4 (0.3-0.6)", rotation angle = 345 (324-9) degrees
  Source counts = 23.3 +/- 5.1
  Background counts = 2.2
  Rate = 0.002 +/- 0.0005
[Thu May  2 07:48:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 07:48:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 07:48:00 2013] Assessing source extent using major axis lower bound
[Thu May  2 07:48:00 2013] Source does appear to be extended
[Thu May  2 07:48:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Thu May  2 09:00:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 09:00:12 2013] Initial guess for spatial extent in simple fitting = 0.57"
[Thu May  2 09:00:12 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.079
[Thu May  2 09:00:12 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 0.57"
[Thu May  2 09:33:26 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src21.ximg exists
[Thu May  2 09:33:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src21.csv
[Thu May  2 09:33:26 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src21_1.ximg exists
[Thu May  2 09:33:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src21.csv
[Thu May  2 09:33:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 09:33:27 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Thu May  2 09:33:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src21.csv
[Thu May  2 09:33:27 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May  2 09:33:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src21.csv
[Thu May  2 09:33:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 09:33:41 2013] Spatial fit model total counts = 24.599200, observed total counts = 28.000000
[Thu May  2 09:33:41 2013] Offset between fit and detection position for source 9 = 0.087713 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.087713 pixels
  Position = (970.9, 938.7) = 3 44 21.26 32 5 2.2
  Extent = 0.7 (0.6-1.0)" x 0.4 (0.3-0.6)", rotation angle = 345 (323-8) degrees
  Source counts = 23.6 +/- 4.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Thu May  2 09:33:41 2013] Vigneting correction estimate = 1.000000
[Thu May  2 09:33:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 09:33:41 2013] Assessing source extent using major axis lower bound
[Thu May  2 09:33:41 2013] Source does appear to be extended
[Thu May  2 09:33:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Thu May  2 10:18:03 2013] Writing source region out to fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9_src.reg
[Thu May  2 10:18:03 2013] Extracting stamp from image fullrun_ccd3_acisf13432_pi14-548_cl_sm2.00.img.gz, (937, 904) - (1005, 973)
[Thu May  2 10:18:03 2013] Writing fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9.gif
[Thu May  2 10:30:34 2013] Size of ../../acisf13432/products/events/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9_src.evt.gz[events] = 25 counts
[Thu May  2 10:30:34 2013] Mean chipx,y = (481.00, 858.36)
[Thu May  2 10:30:34 2013] Mean tdetx,y = (4273.64, 3542.00)
[Thu May  2 10:30:34 2013] chipx,y range = (464.00-496.00, 836.00-875.00)
[Thu May  2 10:30:34 2013] Size of ../../acisf13432/products/events/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 5 counts
[Thu May  2 10:30:35 2013] Not generating rmf since there are only 23 counts
[Thu May  2 10:30:35 2013] arf not found, will run specextract
[Thu May  2 10:31:03 2013] ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9.warf not found
[Thu May  2 10:31:03 2013] ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9.wrmf not found
[Thu May  2 10:31:03 2013] Removal of ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9.soff failed
[Thu May  2 10:40:02 2013] Spectrum 9 has only 24 counts, deleting rmf
[Thu May  2 10:40:02 2013] 175.351
[Thu May  2 10:40:20 2013] Updating aperture counts using extracted products
[Thu May  2 10:40:20 2013] Total counts from fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9_src.pi.gz = 25.00
[Thu May  2 10:40:20 2013] Total counts from fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9_bgd.pi.gz = 5.00
[Thu May  2 10:40:20 2013] Got source and background scale factors 0.000001, 0.000020
[Thu May  2 10:40:20 2013] User source parameters:
  Position = (970.9, 938.7) = 3 44 21.26 32 5 2.2
  Extent = 0.7 (0.6-1.0)" x 0.4 (0.3-0.6)", rotation angle = 345 (323-8) degrees
  Source aperture counts = 24.8 +/- 6.1
  Background aperture counts = 0.2
  Rate = 0.002 +/- 0.0006

[Thu May  2 10:40:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 10:40:22 2013] Using photon index=1.80, rate=0.00239, arf fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src9.arf
[Thu May  2 10:40:22 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 10:40:22 2013] Updating source flux to 3.1e-14
[Thu May  2 10:40:53 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting