[Thu May  2 05:59:01 2013] Detection parameters:
  Position = (678.4, 1385.2) = 3 44 32.56 32 8 42.2
  Extent = 0.5" x 0.5", rotation angle = 33 degrees
  Source counts = 28.7 +/- 5.5
  Background counts = 1.3
  Rate = 0.003 +/- 0.0006

[Thu May  2 05:59:01 2013] Off-axis axis estimate = 0.67'
[Thu May  2 07:12:20 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu May  2 07:12:20 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Thu May  2 07:12:20 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.366
[Thu May  2 07:12:20 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 0.39"
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src19.ximg exists
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src19_1.ximg exists
[Thu May  2 07:47:46 2013] Fit fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src19 appears to have run properly
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May  2 07:47:46 2013] Fit fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Thu May  2 07:48:00 2013] Spatial fit model total counts = 37.233200, observed total counts = 41.000000
[Thu May  2 07:48:00 2013] Offset between fit and detection position for source 29 = 0.752377 pixels
[Thu May  2 07:48:00 2013] 34.727460 total counts/ 5.305060 bgd. counts: snr = 12.774177
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.752377 pixels
  Position = (678.9, 1385.8) = 3 44 32.56 32 8 42.2
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 29.4 +/- 5.9
  Background counts = 5.3
  Rate = 0.003 +/- 0.0006
[Thu May  2 07:48:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 07:48:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 07:48:00 2013] Assessing source extent using major axis lower bound
[Thu May  2 07:48:00 2013] Source does appear to be extended
[Thu May  2 07:48:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 09:00:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 09:00:12 2013] Initial guess for spatial extent in simple fitting = 0.53"
[Thu May  2 09:00:12 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.910
[Thu May  2 09:00:12 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 0.53"
[Thu May  2 09:33:26 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src19.ximg exists
[Thu May  2 09:33:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src19.csv
[Thu May  2 09:33:26 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src19_1.ximg exists
[Thu May  2 09:33:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src19.csv
[Thu May  2 09:33:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 09:33:27 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu May  2 09:33:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src19.csv
[Thu May  2 09:33:27 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu May  2 09:33:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src19.csv
[Thu May  2 09:33:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 09:33:41 2013] Spatial fit model total counts = 32.671200, observed total counts = 44.000000
[Thu May  2 09:33:41 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 09:33:41 2013] Vigneting correction estimate = 1.000000
[Thu May  2 09:33:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 09:33:41 2013] Assessing source extent using major axis lower bound
[Thu May  2 09:33:41 2013] Source does appear to be extended
[Thu May  2 09:33:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:18:03 2013] Writing source region out to fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29_src.reg
[Thu May  2 10:18:03 2013] Extracting stamp from image fullrun_ccd3_acisf13432_pi14-548_cl_sm2.00.img.gz, (655, 1362) - (703, 1410)
[Thu May  2 10:18:03 2013] Writing fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29.gif
[Thu May  2 10:29:13 2013] Size of ../../acisf13432/products/events/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29_src.evt.gz[events] = 30 counts
[Thu May  2 10:29:13 2013] Mean chipx,y = (1004.20, 949.67)
[Thu May  2 10:29:13 2013] Mean tdetx,y = (4182.33, 4065.20)
[Thu May  2 10:29:13 2013] chipx,y range = (991.00-1023.00, 931.00-967.00)
[Thu May  2 10:29:13 2013] Size of ../../acisf13432/products/events/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 17 counts
[Thu May  2 10:29:14 2013] Not generating rmf since there are only 29 counts
[Thu May  2 10:29:14 2013] arf not found, will run specextract
[Thu May  2 10:29:43 2013] ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29.warf not found
[Thu May  2 10:29:43 2013] ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29.wrmf not found
[Thu May  2 10:29:43 2013] Removal of ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29.soff failed
[Thu May  2 10:40:02 2013] Spectrum 29 has only 29 counts, deleting rmf
[Thu May  2 10:40:02 2013] 203.078
[Thu May  2 10:40:19 2013] Updating aperture counts using extracted products
[Thu May  2 10:40:19 2013] Total counts from fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29_src.pi.gz = 30.00
[Thu May  2 10:40:20 2013] Total counts from fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29_bgd.pi.gz = 17.00
[Thu May  2 10:40:20 2013] Got source and background scale factors 0.000001, 0.000009
[Thu May  2 10:40:20 2013] User source parameters:
  Position = (678.9, 1385.8) = 3 44 32.56 32 8 42.2
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source aperture counts = 28.4 +/- 6.5
  Background aperture counts = 1.6
  Rate = 0.003 +/- 0.0007

[Thu May  2 10:40:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 10:40:22 2013] Using photon index=1.80, rate=0.00297, arf fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src29.arf
[Thu May  2 10:40:22 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 10:40:22 2013] Updating source flux to 3.3e-14
[Thu May  2 10:40:53 2013] Flag p found in src. 29 procflags, skipping spectral fitting
[Thu May  2 10:40:53 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting