[Thu May  2 05:59:00 2013] Detection parameters:
  Position = (908.9, 1149.8) = 3 44 23.63 32 6 46.4
  Extent = 0.5" x 0.5", rotation angle = 176 degrees
  Source counts = 42.7 +/- 6.6
  Background counts = 0.3
  Rate = 0.004 +/- 0.0007

[Thu May  2 05:59:01 2013] Off-axis axis estimate = 2.35'
[Thu May  2 07:12:20 2013] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Thu May  2 07:12:20 2013] Initial guess for spatial extent in simple fitting = 0.47"
[Thu May  2 07:12:20 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.061
[Thu May  2 07:12:20 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 0.47"
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src16.ximg exists
[Thu May  2 07:47:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src16.csv
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src16_1.ximg exists
[Thu May  2 07:47:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src16.csv
[Thu May  2 07:47:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13432_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Thu May  2 07:47:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src16.csv
[Thu May  2 07:47:46 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Thu May  2 07:47:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src16.csv
[Thu May  2 07:47:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13432_pi14-548_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 07:48:00 2013] Spatial fit model total counts = 40.155200, observed total counts = 45.000000
[Thu May  2 07:48:00 2013] Offset between fit and detection position for source 20 = 0.570662 pixels
[Thu May  2 07:48:00 2013] 41.114393 total counts/ 0.066992 bgd. counts: snr = 158.588818
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.570662 pixels
  Position = (909.2, 1150.3) = 3 44 23.64 32 6 46.3
  Extent = 0.5 (0.4-0.6)" x 0.3 (0.3-0.4)", rotation angle = 44 (352-72) degrees
  Source counts = 41.0 +/- 6.4
  Background counts = 0.1
  Rate = 0.004 +/- 0.0006
[Thu May  2 07:48:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 07:48:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 07:48:00 2013] Assessing source extent using major axis lower bound
[Thu May  2 07:48:00 2013] Source does appear to be extended
[Thu May  2 07:48:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Thu May  2 09:00:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 09:00:12 2013] Initial guess for spatial extent in simple fitting = 0.41"
[Thu May  2 09:00:12 2013] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.259
[Thu May  2 09:00:12 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 0.41"
[Thu May  2 09:33:26 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src16.ximg exists
[Thu May  2 09:33:26 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src16_1.ximg exists
[Thu May  2 09:33:26 2013] Fit fullrun_ccd3_acisf13432_pi14-548_cl_pass1_src16 appears to have run properly
[Thu May  2 09:33:27 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Thu May  2 09:33:27 2013] fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Thu May  2 09:33:27 2013] Fit fullrun_ccd3_acisf13432_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Thu May  2 09:33:41 2013] Spatial fit model total counts = 40.443800, observed total counts = 44.000000
[Thu May  2 09:33:41 2013] Offset between fit and detection position for source 20 = 0.035440 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.035440 pixels
  Position = (909.2, 1150.3) = 3 44 23.64 32 6 46.3
  Extent = 0.5 (0.4-0.6)" x 0.3 (0.3-0.4)", rotation angle = 43 (12-70) degrees
  Source counts = 41.2 +/- 6.4
  Background counts = 0.0
  Rate = 0.004 +/- 0.0006
[Thu May  2 09:33:41 2013] Vigneting correction estimate = 1.000000
[Thu May  2 09:33:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 09:33:41 2013] Assessing source extent using major axis lower bound
[Thu May  2 09:33:41 2013] Source does appear to be extended
[Thu May  2 09:33:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Thu May  2 10:18:03 2013] Writing source region out to fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20_src.reg
[Thu May  2 10:18:03 2013] Extracting stamp from image fullrun_ccd3_acisf13432_pi14-548_cl_sm2.00.img.gz, (887, 1128) - (932, 1173)
[Thu May  2 10:18:03 2013] Writing fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20.gif
[Thu May  2 10:27:22 2013] Size of ../../acisf13432/products/events/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20_src.evt.gz[events] = 41 counts
[Thu May  2 10:27:22 2013] Mean chipx,y = (680.66, 956.32)
[Thu May  2 10:27:22 2013] Mean tdetx,y = (4175.68, 3741.66)
[Thu May  2 10:27:22 2013] chipx,y range = (660.00-694.00, 940.00-972.00)
[Thu May  2 10:27:22 2013] Size of ../../acisf13432/products/events/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 6 counts
[Thu May  2 10:27:23 2013] Not generating rmf since there are only 41 counts
[Thu May  2 10:27:23 2013] arf not found, will run specextract
[Thu May  2 10:27:51 2013] ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20.warf not found
[Thu May  2 10:27:51 2013] ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20.wrmf not found
[Thu May  2 10:27:51 2013] Removal of ../../acisf13432/products/spectra/fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20.soff failed
[Thu May  2 10:40:02 2013] Spectrum 20 has only 41 counts, deleting rmf
[Thu May  2 10:40:02 2013] 193.961
[Thu May  2 10:40:19 2013] Updating aperture counts using extracted products
[Thu May  2 10:40:19 2013] Total counts from fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20_src.pi.gz = 41.00
[Thu May  2 10:40:19 2013] Total counts from fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20_bgd.pi.gz = 6.00
[Thu May  2 10:40:19 2013] Got source and background scale factors 0.000001, 0.000009
[Thu May  2 10:40:19 2013] User source parameters:
  Position = (909.2, 1150.3) = 3 44 23.64 32 6 46.3
  Extent = 0.5 (0.4-0.6)" x 0.3 (0.3-0.4)", rotation angle = 43 (12-70) degrees
  Source aperture counts = 40.6 +/- 7.5
  Background aperture counts = 0.4
  Rate = 0.004 +/- 0.0008

[Thu May  2 10:40:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 10:40:22 2013] Using photon index=1.80, rate=0.00415, arf fullrun_ccd3_acisf13432_pi14-548_pass1_cl_src20.arf
[Thu May  2 10:40:22 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 10:40:22 2013] Updating source flux to 4.8e-14
[Thu May  2 10:40:53 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting