[Wed May  1 15:52:56 2013] Detection parameters:
  Position = (945.6, 906.4) = 3 44 21.20 32 5 2.2
  Extent = 0.6" x 0.5", rotation angle = 74 degrees
  Source counts = 23.7 +/- 4.9
  Background counts = 0.3
  Rate = 0.002 +/- 0.0005

[Wed May  1 15:52:57 2013] Off-axis axis estimate = 4.11'
[Wed May  1 17:13:20 2013] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Wed May  1 17:13:20 2013] Initial guess for spatial extent in simple fitting = 0.86"
[Wed May  1 17:13:20 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.231
[Wed May  1 17:13:20 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 0.86"
[Wed May  1 17:50:15 2013] fullrun_ccd3_acisf13431_pi14-548_cl_pass0_src17.ximg exists
[Wed May  1 17:50:15 2013] fullrun_ccd3_acisf13431_pi14-548_cl_pass0_src17_1.ximg exists
[Wed May  1 17:50:15 2013] Fit fullrun_ccd3_acisf13431_pi14-548_cl_pass0_src17 appears to have run properly
[Wed May  1 17:50:15 2013] fullrun_ccd3_acisf13431_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Wed May  1 17:50:15 2013] fullrun_ccd3_acisf13431_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May  1 17:50:15 2013] Fit fullrun_ccd3_acisf13431_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Wed May  1 17:50:29 2013] Spatial fit model total counts = 24.278200, observed total counts = 26.000000
[Wed May  1 17:50:29 2013] Offset between fit and detection position for source 16 = 0.793809 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.793809 pixels
  Position = (946.1, 907.0) = 3 44 21.20 32 5 2.2
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 23.6 +/- 4.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Wed May  1 17:50:29 2013] Vigneting correction estimate = 1.000000
[Wed May  1 17:50:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 17:50:29 2013] Assessing source extent using major axis lower bound
[Wed May  1 17:50:29 2013] Source does appear to be extended
[Wed May  1 17:50:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 19:04:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 19:04:10 2013] Initial guess for spatial extent in simple fitting = 0.69"
[Wed May  1 19:04:10 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.112
[Wed May  1 19:04:10 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 0.69"
[Wed May  1 19:40:25 2013] fullrun_ccd3_acisf13431_pi14-548_cl_pass1_src17.ximg exists
[Wed May  1 19:40:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13431_pi14-548_cl_pass1_src17.csv
[Wed May  1 19:40:25 2013] fullrun_ccd3_acisf13431_pi14-548_cl_pass1_src17_1.ximg exists
[Wed May  1 19:40:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13431_pi14-548_cl_pass1_src17.csv
[Wed May  1 19:40:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13431_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13431_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 19:40:25 2013] fullrun_ccd3_acisf13431_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Wed May  1 19:40:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13431_pi14-548_cl_pass1_tfrozen_src17.csv
[Wed May  1 19:40:25 2013] fullrun_ccd3_acisf13431_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Wed May  1 19:40:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13431_pi14-548_cl_pass1_tfrozen_src17.csv
[Wed May  1 19:40:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13431_pi14-548_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13431_pi14-548_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 19:40:38 2013] Spatial fit model total counts = 23.545200, observed total counts = 26.000000
[Wed May  1 19:40:38 2013] Offset between fit and detection position for source 16 = 0.016372 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.016372 pixels
  Position = (946.1, 907.0) = 3 44 21.20 32 5 2.2
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 22.8 +/- 4.8
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Wed May  1 19:40:38 2013] Vigneting correction estimate = 1.000000
[Wed May  1 19:40:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 19:40:38 2013] Assessing source extent using major axis lower bound
[Wed May  1 19:40:38 2013] Source does appear to be extended
[Wed May  1 19:40:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 20:22:25 2013] Writing source region out to fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16_src.reg
[Wed May  1 20:22:25 2013] Extracting stamp from image fullrun_ccd3_acisf13431_pi14-548_cl_sm2.00.img.gz, (914, 875) - (978, 939)
[Wed May  1 20:22:25 2013] Writing fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16.gif
[Wed May  1 20:32:15 2013] Size of ../../acisf13431/products/events/fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16_src.evt.gz[events] = 24 counts
[Wed May  1 20:32:15 2013] Mean chipx,y = (487.54, 836.25)
[Wed May  1 20:32:15 2013] Mean tdetx,y = (4295.75, 3548.54)
[Wed May  1 20:32:15 2013] chipx,y range = (470.00-501.00, 819.00-852.00)
[Wed May  1 20:32:15 2013] Size of ../../acisf13431/products/events/fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 8 counts
[Wed May  1 20:32:16 2013] Not generating rmf since there are only 22 counts
[Wed May  1 20:32:16 2013] arf not found, will run specextract
[Wed May  1 20:32:43 2013] ../../acisf13431/products/spectra/fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16.warf not found
[Wed May  1 20:32:43 2013] ../../acisf13431/products/spectra/fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16.wrmf not found
[Wed May  1 20:32:43 2013] Removal of ../../acisf13431/products/spectra/fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16.soff failed
[Wed May  1 20:45:01 2013] Spectrum 16 has only 23 counts, deleting rmf
[Wed May  1 20:45:01 2013] 174.442
[Wed May  1 20:45:17 2013] Updating aperture counts using extracted products
[Wed May  1 20:45:17 2013] Total counts from fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16_src.pi.gz = 24.00
[Wed May  1 20:45:17 2013] Total counts from fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16_bgd.pi.gz = 8.00
[Wed May  1 20:45:17 2013] Got source and background scale factors 0.000002, 0.000018
[Wed May  1 20:45:17 2013] User source parameters:
  Position = (946.1, 907.0) = 3 44 21.20 32 5 2.2
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source aperture counts = 23.3 +/- 6.0
  Background aperture counts = 0.7
  Rate = 0.002 +/- 0.0006

[Wed May  1 20:45:20 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 20:45:20 2013] Using photon index=1.80, rate=0.0023, arf fullrun_ccd3_acisf13431_pi14-548_pass1_cl_src16.arf
[Wed May  1 20:45:20 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 20:45:20 2013] Updating source flux to 3e-14
[Wed May  1 20:45:36 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting