[Wed May 1 15:51:10 2013] Detection parameters: Position = (984.8, 295.7) = 3 44 22.31 32 12 0.5 Extent = 0.7" x 0.5", rotation angle = 83 degrees Source counts = 25.5 +/- 5.1 Background counts = 0.5 Rate = 0.003 +/- 0.0005 [Wed May 1 15:51:11 2013] Off-axis axis estimate = 3.69' [Wed May 1 15:55:19 2013] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting [Wed May 1 15:55:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 1 15:55:19 2013] Initial guess for spatial extent in simple fitting = 0.74" [Wed May 1 15:55:19 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.994 [Wed May 1 15:55:19 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.74" [Wed May 1 16:22:40 2013] fullrun_ccd0_acisf13431_pi14-548_cl_pass0_src5.ximg exists [Wed May 1 16:22:40 2013] fullrun_ccd0_acisf13431_pi14-548_cl_pass0_src5_1.ximg exists [Wed May 1 16:22:40 2013] Fit fullrun_ccd0_acisf13431_pi14-548_cl_pass0_src5 appears to have run properly [Wed May 1 16:22:40 2013] fullrun_ccd0_acisf13431_pi14-548_cl_pass0_tfrozen_src5.ximg exists [Wed May 1 16:22:40 2013] fullrun_ccd0_acisf13431_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists [Wed May 1 16:22:40 2013] Fit fullrun_ccd0_acisf13431_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly [Wed May 1 17:50:21 2013] Spatial fit model total counts = 25.263700, observed total counts = 27.000000 [Wed May 1 17:50:21 2013] Offset between fit and detection position for source 6 = 0.676013 pixels Spatial fit parameters: Offset between fit and detection position for source 6 = 0.676013 pixels Position = (985.3, 296.2) = 3 44 22.31 32 12 0.5 Extent = 0.9 (0.7-1.3)" x 0.5 (0.4-0.7)", rotation angle = 95 (77-116) degrees Source counts = 25.7 +/- 5.1 Background counts = 0.0 Rate = 0.003 +/- 0.0005 [Wed May 1 17:50:21 2013] Vigneting correction estimate = 1.000000 [Wed May 1 17:50:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 17:50:21 2013] Assessing source extent using major axis lower bound [Wed May 1 17:50:21 2013] Source does appear to be extended [Wed May 1 17:50:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11 [Wed May 1 17:50:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 1 17:50:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 1 17:50:46 2013] Initial guess for spatial extent in simple fitting = 0.72" [Wed May 1 17:50:46 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.036 [Wed May 1 17:50:46 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.72" [Wed May 1 18:15:17 2013] fullrun_ccd0_acisf13431_pi14-548_cl_pass1_src5.ximg exists [Wed May 1 18:15:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13431_pi14-548_cl_pass1_src5.csv [Wed May 1 18:15:17 2013] fullrun_ccd0_acisf13431_pi14-548_cl_pass1_src5_1.ximg exists [Wed May 1 18:15:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13431_pi14-548_cl_pass1_src5.csv [Wed May 1 18:15:17 2013] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf13431_pi14-548_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf13431_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 18:15:17 2013] fullrun_ccd0_acisf13431_pi14-548_cl_pass1_tfrozen_src5.ximg exists [Wed May 1 18:15:17 2013] fullrun_ccd0_acisf13431_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists [Wed May 1 18:15:17 2013] Fit fullrun_ccd0_acisf13431_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly [Wed May 1 19:40:30 2013] Spatial fit model total counts = 24.930900, observed total counts = 27.000000 [Wed May 1 19:40:30 2013] Offset between fit and detection position for source 6 = 0.025842 pixels Spatial fit parameters: Offset between fit and detection position for source 6 = 0.025842 pixels Position = (985.3, 296.2) = 3 44 22.31 32 12 0.5 Extent = 0.9 (0.8-1.2)" x 0.5 (0.4-0.7)", rotation angle = 96 (77-116) degrees Source counts = 25.4 +/- 5.0 Background counts = 0.0 Rate = 0.003 +/- 0.0005 [Wed May 1 19:40:30 2013] Vigneting correction estimate = 1.000000 [Wed May 1 19:40:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 19:40:30 2013] Assessing source extent using major axis lower bound [Wed May 1 19:40:30 2013] Source does appear to be extended [Wed May 1 19:40:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15 [Wed May 1 19:40:55 2013] Writing source region out to fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6_src.reg [Wed May 1 19:40:55 2013] Extracting stamp from image fullrun_ccd0_acisf13431_pi14-548_cl_sm2.00.img.gz, (942, 253) - (1028, 339) [Wed May 1 19:40:55 2013] Writing fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6.gif [Wed May 1 19:43:49 2013] Size of ../../acisf13431/products/events/fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6_src.evt.gz[events] = 26 counts [Wed May 1 19:43:49 2013] Mean chipx,y = (989.81, 621.73) [Wed May 1 19:43:49 2013] Mean tdetx,y = (3682.73, 4142.19) [Wed May 1 19:43:49 2013] chipx,y range = (974.00-1006.00, 604.00-638.00) [Wed May 1 19:43:49 2013] Size of ../../acisf13431/products/events/fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 6 counts [Wed May 1 19:43:50 2013] Not generating rmf since there are only 25 counts [Wed May 1 19:43:50 2013] arf not found, will run specextract [Wed May 1 19:44:13 2013] ../../acisf13431/products/spectra/fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6.warf not found [Wed May 1 19:44:13 2013] ../../acisf13431/products/spectra/fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6.wrmf not found [Wed May 1 19:44:13 2013] Removal of ../../acisf13431/products/spectra/fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6.soff failed [Wed May 1 19:55:32 2013] Spectrum 6 has only 25 counts, deleting rmf [Wed May 1 19:55:32 2013] 174.232 [Wed May 1 20:45:04 2013] Updating aperture counts using extracted products [Wed May 1 20:45:04 2013] Total counts from fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6_src.pi.gz = 26.00 [Wed May 1 20:45:04 2013] Total counts from fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6_bgd.pi.gz = 6.00 [Wed May 1 20:45:04 2013] Got source and background scale factors 0.000002, 0.000031 [Wed May 1 20:45:04 2013] User source parameters: Position = (985.3, 296.2) = 3 44 22.31 32 12 0.5 Extent = 0.9 (0.8-1.2)" x 0.5 (0.4-0.7)", rotation angle = 96 (77-116) degrees Source aperture counts = 25.7 +/- 6.2 Background aperture counts = 0.3 Rate = 0.003 +/- 0.0006 [Wed May 1 20:45:07 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 20:45:07 2013] Using photon index=1.80, rate=0.00256, arf fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6.arf [Wed May 1 20:45:07 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 1 20:45:07 2013] Updating source flux to 3.3e-14 [Wed May 1 20:45:22 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 1 20:45:23 2013] acisf13431/analysis//spectral/fullrun_ccd0_acisf13431_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete