[Mon May 13 11:10:53 2013] Detection parameters:
  Position = (594.7, 1358.3) = 3 44 32.58 32 8 42.3
  Extent = 0.6" x 0.5", rotation angle = 168 degrees
  Source counts = 24.1 +/- 5.1
  Background counts = 1.9
  Rate = 0.002 +/- 0.0005

[Mon May 13 11:10:53 2013] Off-axis axis estimate = 0.54'
[Mon May 13 12:38:05 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon May 13 12:38:05 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Mon May 13 12:38:05 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.345
[Mon May 13 12:38:05 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 0.39"
[Mon May 13 13:15:28 2013] fullrun_ccd3_acisf13430_pi14-548_cl_pass0_src19.ximg exists
[Mon May 13 13:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13430_pi14-548_cl_pass0_src19.csv
[Mon May 13 13:15:28 2013] fullrun_ccd3_acisf13430_pi14-548_cl_pass0_src19_1.ximg exists
[Mon May 13 13:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13430_pi14-548_cl_pass0_src19.csv
[Mon May 13 13:15:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13430_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13430_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 13:15:29 2013] fullrun_ccd3_acisf13430_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Mon May 13 13:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13430_pi14-548_cl_pass0_tfrozen_src19.csv
[Mon May 13 13:15:29 2013] fullrun_ccd3_acisf13430_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Mon May 13 13:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13430_pi14-548_cl_pass0_tfrozen_src19.csv
[Mon May 13 13:15:29 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13430_pi14-548_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13430_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 13:15:42 2013] Spatial fit model total counts = 32.563400, observed total counts = 39.000000
[Mon May 13 13:15:42 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 13:15:42 2013] Vigneting correction estimate = 1.000000
[Mon May 13 13:15:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 13:15:42 2013] Assessing source extent using major
[Mon May 13 13:15:42 2013] Source does appear to be extended
[Mon May 13 13:15:42 2013] Computing asymmetry using major and minor axis, asym = 1.21
[Mon May 13 14:29:44 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon May 13 14:29:44 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Mon May 13 14:29:44 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.345
[Mon May 13 14:29:44 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 0.39"
[Mon May 13 15:07:24 2013] fullrun_ccd3_acisf13430_pi14-548_cl_pass1_src19.ximg exists
[Mon May 13 15:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13430_pi14-548_cl_pass1_src19.csv
[Mon May 13 15:07:24 2013] fullrun_ccd3_acisf13430_pi14-548_cl_pass1_src19_1.ximg exists
[Mon May 13 15:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13430_pi14-548_cl_pass1_src19.csv
[Mon May 13 15:07:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13430_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13430_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:07:24 2013] fullrun_ccd3_acisf13430_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Mon May 13 15:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13430_pi14-548_cl_pass1_tfrozen_src19.csv
[Mon May 13 15:07:24 2013] fullrun_ccd3_acisf13430_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Mon May 13 15:07:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13430_pi14-548_cl_pass1_tfrozen_src19.csv
[Mon May 13 15:07:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13430_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13430_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:07:37 2013] Spatial fit model total counts = 33.670300, observed total counts = 39.000000
[Mon May 13 15:07:37 2013] Offset between fit and detection position for source 30 = 0.975654 pixels
[Mon May 13 15:07:37 2013] 30.582400 total counts/ 6.793000 bgd. counts: snr = 9.127518
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.975654 pixels
  Position = (595.5, 1358.9) = 3 44 32.57 32 8 42.3
  Extent = 0.5 (0.4-0.7)" x 0.4 (0.3-0.5)", rotation angle = 30
  Source counts = 23.8 +/- 5.5
  Background counts = 6.8
  Rate = 0.002 +/- 0.0006
[Mon May 13 15:07:37 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:07:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:07:37 2013] Assessing source extent using major axis lower bound
[Mon May 13 15:07:37 2013] Source does appear to be extended
[Mon May 13 15:07:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Mon May 13 15:49:48 2013] Writing source region out to fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30_src.reg
[Mon May 13 15:49:48 2013] Extracting stamp from image fullrun_ccd3_acisf13430_pi14-548_cl_sm2.00.img.gz, (571, 1334) - (620, 1384)
[Mon May 13 15:49:48 2013] Writing fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30.gif
[Mon May 13 16:00:25 2013] Size of ../../acisf13430/products/events/fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30_src.evt.gz[events] = 25 counts
[Mon May 13 16:00:25 2013] Mean chipx,y = (1009.76, 972.96)
[Mon May 13 16:00:25 2013] Mean tdetx,y = (4159.04, 4070.76)
[Mon May 13 16:00:25 2013] chipx,y range = (994.00-1023.00, 957.00-993.00)
[Mon May 13 16:00:25 2013] Size of ../../acisf13430/products/events/fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 19 counts
[Mon May 13 16:00:27 2013] Not generating rmf since there are only 23 counts
[Mon May 13 16:00:27 2013] arf not found, will run specextract
[Mon May 13 16:00:58 2013] ../../acisf13430/products/spectra/fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30.warf not found
[Mon May 13 16:00:58 2013] ../../acisf13430/products/spectra/fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30.wrmf not found
[Mon May 13 16:00:58 2013] Removal of ../../acisf13430/products/spectra/fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30.soff failed
[Mon May 13 16:10:53 2013] Spectrum 30 has only 24 counts, deleting rmf
[Mon May 13 16:10:53 2013] 201.823
[Mon May 13 16:11:09 2013] Updating aperture counts using extracted products
[Mon May 13 16:11:09 2013] Total counts from fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30_src.pi.gz = 25.00
[Mon May 13 16:11:09 2013] Total counts from fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30_bgd.pi.gz = 19.00
[Mon May 13 16:11:09 2013] Got source and background scale factors 0.000001, 0.000010
[Mon May 13 16:11:10 2013] User source parameters:
  Position = (595.5, 1358.9) = 3 44 32.57 32 8 42.3
  Extent = 0.5 (0.4-0.7)" x 0.4 (0.3-0.5)", rotation angle = 30
  Source aperture counts = 23.7 +/- 6.1
  Background aperture counts = 1.3
  Rate = 0.002 +/- 0.0006

[Mon May 13 16:11:12 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:11:12 2013] Using photon index=1.80, rate=0.0024, arf fullrun_ccd3_acisf13430_pi14-548_pass1_cl_src30.arf
[Mon May 13 16:11:12 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 16:11:12 2013] Updating source flux to 2.7e-14
[Mon May 13 16:11:38 2013] Flag p found in src. 30 procflags, skipping spectral fitting
[Mon May 13 16:11:38 2013] Source 30 has fewer than 100.000000 counts, skipping spectral fitting