[Wed Jun 12 21:48:55 2013] Detection parameters:
  Position = (620.5, 1393.5) = 3 44 31.58 32 8 44.0
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 75.9 +/- 8.8
  Background counts = 1.1
  Rate = 0.007 +/- 0.0008

[Wed Jun 12 21:48:55 2013] Off-axis axis estimate = 0.32'
[Wed Jun 12 23:13:44 2013] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 23:13:44 2013] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Jun 12 23:13:44 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.294
[Wed Jun 12 23:13:44 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.40"
[Wed Jun 12 23:48:57 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass0_src9.ximg exists
[Wed Jun 12 23:48:57 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Jun 12 23:48:57 2013] Fit fullrun_ccd3_acisf13429_pi14-548_cl_pass0_src9 appears to have run properly
[Wed Jun 12 23:48:57 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Jun 12 23:48:57 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jun 12 23:48:57 2013] Fit fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jun 12 23:49:12 2013] Spatial fit model total counts = 91.280900, observed total counts = 89.000000
[Wed Jun 12 23:49:12 2013] Offset between fit and detection position for source 26 = 0.958848 pixels
[Wed Jun 12 23:49:12 2013] 92.170900 total counts/ 12.940900 bgd. counts: snr = 22.024569
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.958848 pixels
  Position = (620.8, 1394.4) = 3 44 31.59 32 8 44.2
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 79.2 +/- 9.6
  Background counts = 12.9
  Rate = 0.008 +/- 0.0009
[Wed Jun 12 23:49:12 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 23:49:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 23:49:12 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 23:49:12 2013] Source does appear to be extended
[Wed Jun 12 23:49:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 01:10:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:20 2013] Initial guess for spatial extent in simple fitting = 0.33"
[Thu Jun 13 01:10:20 2013] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.088
[Thu Jun 13 01:10:20 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.33"
[Thu Jun 13 01:47:03 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src9.ximg exists
[Thu Jun 13 01:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src9.csv
[Thu Jun 13 01:47:03 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Jun 13 01:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src9.csv
[Thu Jun 13 01:47:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 01:47:03 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun 13 01:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src9.csv
[Thu Jun 13 01:47:03 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun 13 01:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src9.csv
[Thu Jun 13 01:47:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 01:47:18 2013] Source 26 is offset by 0.243801 and -1.753577 pixels which is larger than
2 X fitted extent = 0.486829 x 0.486829, not incorporating fit results
[Thu Jun 13 01:47:18 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 01:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 01:47:18 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 01:47:18 2013] Source does appear to be extended
[Thu Jun 13 01:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 02:31:54 2013] Writing source region out to fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26_src.reg
[Thu Jun 13 02:31:54 2013] Extracting stamp from image fullrun_ccd3_acisf13429_pi14-548_cl_sm2.00.img.gz, (606, 1379) - (636, 1410)
[Thu Jun 13 02:31:54 2013] Writing fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26.gif
[Thu Jun 13 02:36:58 2013] Size of ../../acisf13429/products/events/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26_src.evt.gz[events] = 81 counts
[Thu Jun 13 02:36:58 2013] Mean chipx,y = (975.12, 1012.57)
[Thu Jun 13 02:36:58 2013] Mean tdetx,y = (4119.43, 4036.12)
[Thu Jun 13 02:36:58 2013] chipx,y range = (959.00-993.00, 1006.00-1022.00)
[Thu Jun 13 02:36:58 2013] Size of ../../acisf13429/products/events/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 5 counts
[Thu Jun 13 02:36:59 2013] Not generating rmf since there are only 79 counts
[Thu Jun 13 02:36:59 2013] arf not found, will run specextract
[Thu Jun 13 02:37:35 2013] ../../acisf13429/products/spectra/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26.warf not found
[Thu Jun 13 02:37:35 2013] ../../acisf13429/products/spectra/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26.wrmf not found
[Thu Jun 13 02:37:35 2013] Removal of ../../acisf13429/products/spectra/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26.soff failed
[Thu Jun 13 02:54:25 2013] Spectrum 26 has only 79 counts, deleting rmf
[Thu Jun 13 02:54:25 2013] 98.7929
[Thu Jun 13 02:54:42 2013] Updating aperture counts using extracted products
[Thu Jun 13 02:54:42 2013] Total counts from fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26_src.pi.gz = 81.00
[Thu Jun 13 02:54:42 2013] Total counts from fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26_bgd.pi.gz = 5.00
[Thu Jun 13 02:54:42 2013] Got source and background scale factors 0.000000, 0.000004
[Thu Jun 13 02:54:42 2013] User source parameters:
  Position = (620.8, 1394.4) = 3 44 31.59 32 8 44.2
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source aperture counts = 80.6 +/- 10.0
  Background aperture counts = 0.4
  Rate = 0.008 +/- 0.001

[Thu Jun 13 02:54:46 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 02:54:46 2013] Using photon index=1.80, rate=0.00761, arf fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src26.arf
[Thu Jun 13 02:54:46 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 13 02:54:46 2013] Updating source flux to 1.7e-13
[Thu Jun 13 02:55:14 2013] Flag b found in src. 26 procflags, skipping spectral fitting
[Thu Jun 13 02:55:14 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting