[Wed Jun 12 21:48:55 2013] Detection parameters:
  Position = (521.2, 1254.3) = 3 44 35.43 32 7 35.5
  Extent = 0.5" x 0.5", rotation angle = 106 degrees
  Source counts = 18.5 +/- 4.4
  Background counts = 0.5
  Rate = 0.002 +/- 0.0004

[Wed Jun 12 21:48:55 2013] Off-axis axis estimate = 1.61'
[Wed Jun 12 23:13:44 2013] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 23:13:44 2013] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Jun 12 23:13:44 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.873
[Wed Jun 12 23:13:44 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 0.40"
[Wed Jun 12 23:48:57 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass0_src24.ximg exists
[Wed Jun 12 23:48:57 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass0_src24_1.ximg exists
[Wed Jun 12 23:48:57 2013] Fit fullrun_ccd3_acisf13429_pi14-548_cl_pass0_src24 appears to have run properly
[Wed Jun 12 23:48:57 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Wed Jun 12 23:48:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src24.csv
[Wed Jun 12 23:48:57 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Jun 12 23:48:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src24.csv
[Wed Jun 12 23:48:57 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13429_pi14-548_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 23:49:12 2013] Spatial fit model total counts = 20.598200, observed total counts = 23.000000
[Wed Jun 12 23:49:12 2013] Offset between fit and detection position for source 24 = 0.679723 pixels
[Wed Jun 12 23:49:12 2013] 19.894150 total counts/ 1.752850 bgd. counts: snr = 13.702381
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.679723 pixels
  Position = (521.5, 1254.9) = 3 44 35.43 32 7 35.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 18.1 +/- 4.5
  Background counts = 1.8
  Rate = 0.002 +/- 0.0004
[Wed Jun 12 23:49:12 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 23:49:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 23:49:12 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 23:49:12 2013] Source does appear to be extended
[Wed Jun 12 23:49:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 01:10:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 01:10:20 2013] Initial guess for spatial extent in simple fitting = 0.51"
[Thu Jun 13 01:10:20 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.956
[Thu Jun 13 01:10:20 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 0.51"
[Thu Jun 13 01:47:03 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src24.ximg exists
[Thu Jun 13 01:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src24.csv
[Thu Jun 13 01:47:03 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src24_1.ximg exists
[Thu Jun 13 01:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src24.csv
[Thu Jun 13 01:47:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13429_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 01:47:04 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Thu Jun 13 01:47:04 2013] fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Jun 13 01:47:04 2013] Fit fullrun_ccd3_acisf13429_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Jun 13 01:47:18 2013] Spatial fit model total counts = 21.675500, observed total counts = 23.000000
[Thu Jun 13 01:47:18 2013] Offset between fit and detection position for source 24 = 0.123843 pixels
[Thu Jun 13 01:47:18 2013] 20.965270 total counts/ 3.867970 bgd. counts: snr = 8.693326
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.123843 pixels
  Position = (521.6, 1255.0) = 3 44 35.43 32 7 35.6
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 17.1 +/- 4.6
  Background counts = 3.9
  Rate = 0.002 +/- 0.0004
[Thu Jun 13 01:47:18 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 01:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 01:47:18 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 01:47:18 2013] Source does appear to be extended
[Thu Jun 13 01:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 02:31:54 2013] Writing source region out to fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24_src.reg
[Thu Jun 13 02:31:54 2013] Extracting stamp from image fullrun_ccd3_acisf13429_pi14-548_cl_sm2.00.img.gz, (499, 1233) - (544, 1277)
[Thu Jun 13 02:31:54 2013] Writing fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24.gif
[Thu Jun 13 02:46:25 2013] Size of ../../acisf13429/products/events/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24_src.evt.gz[events] = 18 counts
[Thu Jun 13 02:46:25 2013] Mean chipx,y = (971.17, 851.28)
[Thu Jun 13 02:46:25 2013] Mean tdetx,y = (4280.72, 4032.17)
[Thu Jun 13 02:46:25 2013] chipx,y range = (957.00-991.00, 835.00-867.00)
[Thu Jun 13 02:46:25 2013] Size of ../../acisf13429/products/events/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 9 counts
[Thu Jun 13 02:46:26 2013] Not generating rmf since there are only 17 counts
[Thu Jun 13 02:46:26 2013] arf not found, will run specextract
[Thu Jun 13 02:46:59 2013] ../../acisf13429/products/spectra/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24.warf not found
[Thu Jun 13 02:46:59 2013] ../../acisf13429/products/spectra/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24.wrmf not found
[Thu Jun 13 02:46:59 2013] Removal of ../../acisf13429/products/spectra/fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24.soff failed
[Thu Jun 13 02:54:25 2013] Spectrum 24 has only 17 counts, deleting rmf
[Thu Jun 13 02:54:25 2013] 202.202
[Thu Jun 13 02:54:44 2013] Updating aperture counts using extracted products
[Thu Jun 13 02:54:44 2013] Total counts from fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24_src.pi.gz = 18.00
[Thu Jun 13 02:54:44 2013] Total counts from fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24_bgd.pi.gz = 9.00
[Thu Jun 13 02:54:44 2013] Got source and background scale factors 0.000001, 0.000008
[Thu Jun 13 02:54:44 2013] User source parameters:
  Position = (521.6, 1255.0) = 3 44 35.43 32 7 35.6
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source aperture counts = 17.2 +/- 5.3
  Background aperture counts = 0.8
  Rate = 0.002 +/- 0.0005

[Thu Jun 13 02:54:46 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 02:54:46 2013] Using photon index=1.80, rate=0.00164, arf fullrun_ccd3_acisf13429_pi14-548_pass1_cl_src24.arf
[Thu Jun 13 02:54:46 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 13 02:54:46 2013] Updating source flux to 1.8e-14
[Thu Jun 13 02:55:14 2013] Source 24 has fewer than 100.000000 counts, skipping spectral fitting