[Wed Jun 12 21:47:43 2013] Detection parameters:
  Position = (876.8, 551.1) = 3 44 53.80 32 6 51.0
  Extent = 0.5" x 0.5", rotation angle = 48 degrees
  Source counts = 34.5 +/- 5.9
  Background counts = 0.5
  Rate = 0.003 +/- 0.0006

[Wed Jun 12 21:47:43 2013] Off-axis axis estimate = 5.37'
[Wed Jun 12 22:19:22 2013] Using EEF radius (= 1.33 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 22:19:22 2013] Initial guess for spatial extent in simple fitting = 1.33"
[Wed Jun 12 22:19:22 2013] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.726
[Wed Jun 12 22:19:22 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 1.33"
[Wed Jun 12 22:48:27 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src11.ximg exists
[Wed Jun 12 22:48:27 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Jun 12 22:48:27 2013] Fit fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src11 appears to have run properly
[Wed Jun 12 22:48:28 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 12 22:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src11.csv
[Wed Jun 12 22:48:28 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 12 22:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src11.csv
[Wed Jun 12 22:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 23:49:06 2013] Spatial fit model total counts = 46.940200, observed total counts = 43.000000
[Wed Jun 12 23:49:06 2013] Offset between fit and detection position for source 28 = 1.581232 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.581232 pixels
  Position = (878.2, 551.9) = 3 44 53.76 32 6 51.1
  Extent = 1.3 (1.0-1.6)" x 0.7 (0.5-0.8)", rotation angle = 5 (352-23) degrees
  Source counts = 47.3 +/- 6.9
  Background counts = 0.0
  Rate = 0.005 +/- 0.0007
[Wed Jun 12 23:49:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 23:49:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 23:49:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 23:49:06 2013] Source does appear to be extended
[Wed Jun 12 23:49:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Thu Jun 13 00:16:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:16:07 2013] Initial guess for spatial extent in simple fitting = 0.97"
[Thu Jun 13 00:16:07 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.742
[Thu Jun 13 00:16:07 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 0.97"
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src11.ximg exists
[Thu Jun 13 00:45:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src11.csv
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Jun 13 00:45:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src11.csv
[Thu Jun 13 00:45:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 13 00:45:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src11.csv
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 13 00:45:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src11.csv
[Thu Jun 13 00:45:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 01:47:12 2013] Spatial fit model total counts = 47.394100, observed total counts = 42.000000
[Thu Jun 13 01:47:12 2013] Offset between fit and detection position for source 28 = 0.202538 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.202538 pixels
  Position = (878.0, 551.9) = 3 44 53.77 32 6 51.1
  Extent = 1.3 (1.0-1.6)" x 0.7 (0.5-0.9)", rotation angle = 7 (351-21) degrees
  Source counts = 48.0 +/- 6.9
  Background counts = 0.0
  Rate = 0.005 +/- 0.0007
[Thu Jun 13 01:47:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 01:47:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 01:47:12 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 01:47:12 2013] Source does appear to be extended
[Thu Jun 13 01:47:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Thu Jun 13 02:01:31 2013] Writing source region out to fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28_src.reg
[Thu Jun 13 02:01:31 2013] Extracting stamp from image fullrun_ccd1_acisf13429_pi14-548_cl_sm2.00.img.gz, (819, 493) - (937, 611)
[Thu Jun 13 02:01:31 2013] Writing fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28.gif
[Thu Jun 13 02:07:37 2013] Size of ../../acisf13429/products/events/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28_src.evt.gz[events] = 41 counts
[Thu Jun 13 02:07:37 2013] Mean chipx,y = (260.22, 498.49)
[Thu Jun 13 02:07:37 2013] Mean tdetx,y = (4633.51, 4367.22)
[Thu Jun 13 02:07:37 2013] chipx,y range = (241.00-280.00, 480.00-516.00)
[Thu Jun 13 02:07:37 2013] Size of ../../acisf13429/products/events/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 9 counts
[Thu Jun 13 02:07:38 2013] Not generating rmf since there are only 47 counts
[Thu Jun 13 02:07:38 2013] arf not found, will run specextract
[Thu Jun 13 02:08:00 2013] ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28.warf not found
[Thu Jun 13 02:08:00 2013] ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28.wrmf not found
[Thu Jun 13 02:08:00 2013] Removal of ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28.soff failed
[Thu Jun 13 02:17:03 2013] Spectrum 28 has only 48 counts, deleting rmf
[Thu Jun 13 02:17:03 2013] 183.341
[Thu Jun 13 02:54:34 2013] Updating aperture counts using extracted products
[Thu Jun 13 02:54:34 2013] Total counts from fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28_src.pi.gz = 41.00
[Thu Jun 13 02:54:34 2013] Total counts from fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28_bgd.pi.gz = 9.00
[Thu Jun 13 02:54:34 2013] Got source and background scale factors 0.000003, 0.000061
[Thu Jun 13 02:54:34 2013] User source parameters:
  Position = (878.0, 551.9) = 3 44 53.77 32 6 51.1
  Extent = 1.3 (1.0-1.6)" x 0.7 (0.5-0.9)", rotation angle = 7 (351-21) degrees
  Source aperture counts = 40.6 +/- 7.5
  Background aperture counts = 0.4
  Rate = 0.004 +/- 0.0007

[Thu Jun 13 02:54:37 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 02:54:37 2013] Using photon index=1.80, rate=0.00461, arf fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src28.arf
[Thu Jun 13 02:54:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 13 02:54:37 2013] Updating source flux to 5.7e-14
[Thu Jun 13 02:54:59 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting