[Wed Jun 12 21:47:43 2013] Detection parameters:
  Position = (1252.8, 903.1) = 3 44 39.24 32 9 44.3
  Extent = 0.5" x 0.5", rotation angle = 166 degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.4
  Rate = 0.001 +/- 0.0004

[Wed Jun 12 21:47:43 2013] Off-axis axis estimate = 2.19'
[Wed Jun 12 22:19:22 2013] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 22:19:22 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Jun 12 22:19:22 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.123
[Wed Jun 12 22:19:22 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 0.45"
[Wed Jun 12 22:48:27 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src19.ximg exists
[Wed Jun 12 22:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src19.csv
[Wed Jun 12 22:48:27 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src19_1.ximg exists
[Wed Jun 12 22:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src19.csv
[Wed Jun 12 22:48:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 22:48:28 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed Jun 12 22:48:28 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jun 12 22:48:28 2013] Fit fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Jun 12 23:49:06 2013] Spatial fit model total counts = 14.327100, observed total counts = 15.000000
[Wed Jun 12 23:49:06 2013] Offset between fit and detection position for source 19 = 0.718128 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.718128 pixels
  Position = (1253.3, 903.7) = 3 44 39.24 32 9 44.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 13.9 +/- 3.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Wed Jun 12 23:49:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 23:49:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 23:49:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 23:49:06 2013] Source does appear to be extended
[Wed Jun 12 23:49:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:16:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:16:07 2013] Initial guess for spatial extent in simple fitting = 0.49"
[Thu Jun 13 00:16:07 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Thu Jun 13 00:16:07 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 0.49"
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src19.ximg exists
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src19_1.ximg exists
[Thu Jun 13 00:45:36 2013] Fit fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src19 appears to have run properly
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu Jun 13 00:45:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src19.csv
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jun 13 00:45:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src19.csv
[Thu Jun 13 00:45:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 01:47:12 2013] Spatial fit model total counts = 13.523000, observed total counts = 15.000000
[Thu Jun 13 01:47:12 2013] Offset between fit and detection position for source 19 = 0.018504 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.018504 pixels
  Position = (1253.3, 903.6) = 3 44 39.24 32 9 44.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 13.2 +/- 3.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu Jun 13 01:47:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 01:47:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 01:47:12 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 01:47:12 2013] Source does appear to be extended
[Thu Jun 13 01:47:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 02:01:31 2013] Writing source region out to fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19_src.reg
[Thu Jun 13 02:01:31 2013] Extracting stamp from image fullrun_ccd1_acisf13429_pi14-548_cl_sm2.00.img.gz, (1230, 881) - (1276, 927)
[Thu Jun 13 02:01:31 2013] Writing fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19.gif
[Thu Jun 13 02:12:10 2013] Size of ../../acisf13429/products/events/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19_src.evt.gz[events] = 14 counts
[Thu Jun 13 02:12:10 2013] Mean chipx,y = (163.71, 1002.43)
[Thu Jun 13 02:12:10 2013] Mean tdetx,y = (4129.57, 4270.71)
[Thu Jun 13 02:12:10 2013] chipx,y range = (144.00-177.00, 990.00-1022.00)
[Thu Jun 13 02:12:10 2013] Size of ../../acisf13429/products/events/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 1 counts
[Thu Jun 13 02:12:11 2013] Not generating rmf since there are only 13 counts
[Thu Jun 13 02:12:11 2013] arf not found, will run specextract
[Thu Jun 13 02:12:38 2013] ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19.warf not found
[Thu Jun 13 02:12:38 2013] ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19.wrmf not found
[Thu Jun 13 02:12:38 2013] Removal of ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19.soff failed
[Thu Jun 13 02:17:03 2013] Spectrum 19 has only 13 counts, deleting rmf
[Thu Jun 13 02:17:03 2013] 192.595
[Thu Jun 13 02:54:35 2013] Updating aperture counts using extracted products
[Thu Jun 13 02:54:35 2013] Total counts from fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19_src.pi.gz = 14.00
[Thu Jun 13 02:54:35 2013] Total counts from fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19_bgd.pi.gz = 1.00
[Thu Jun 13 02:54:35 2013] Got source and background scale factors 0.000001, 0.000009
[Thu Jun 13 02:54:35 2013] User source parameters:
  Position = (1253.3, 903.6) = 3 44 39.24 32 9 44.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 13.9 +/- 4.8
  Background aperture counts = 0.1
  Rate = 0.001 +/- 0.0005

[Thu Jun 13 02:54:37 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 02:54:37 2013] Using photon index=1.80, rate=0.00127, arf fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src19.arf
[Thu Jun 13 02:54:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 13 02:54:37 2013] Updating source flux to 1.5e-14
[Thu Jun 13 02:54:59 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting