[Wed Jun 12 21:47:43 2013] Detection parameters:
  Position = (1143.7, 723.8) = 3 44 43.46 32 8 16.1
  Extent = 0.7" x 0.5", rotation angle = 54 degrees
  Source counts = 15.6 +/- 4.0
  Background counts = 0.4
  Rate = 0.002 +/- 0.0004

[Wed Jun 12 21:47:43 2013] Off-axis axis estimate = 2.88'
[Wed Jun 12 22:19:22 2013] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 22:19:22 2013] Initial guess for spatial extent in simple fitting = 0.56"
[Wed Jun 12 22:19:22 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.846
[Wed Jun 12 22:19:22 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 0.56"
[Wed Jun 12 22:48:27 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src18.ximg exists
[Wed Jun 12 22:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src18.csv
[Wed Jun 12 22:48:27 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Jun 12 22:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src18.csv
[Wed Jun 12 22:48:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13429_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 22:48:28 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 12 22:48:28 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 12 22:48:28 2013] Fit fullrun_ccd1_acisf13429_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Jun 12 23:49:06 2013] Spatial fit model total counts = 15.334500, observed total counts = 17.000000
[Wed Jun 12 23:49:06 2013] Offset between fit and detection position for source 15 = 1.157175 pixels
[Wed Jun 12 23:49:06 2013] 14.616755 total counts/ 0.178955 bgd. counts: snr = 34.129435
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.157175 pixels
  Position = (1144.4, 724.7) = 3 44 43.45 32 8 16.2
  Extent = 0.8 (0.4-0.9)" x 0.4 (0.4-0.9)", rotation angle = 137 (113-153) degrees
  Source counts = 14.4 +/- 3.8
  Background counts = 0.2
  Rate = 0.001 +/- 0.0004
[Wed Jun 12 23:49:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 23:49:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 23:49:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 23:49:06 2013] Source does appear to be extended
[Wed Jun 12 23:49:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.43
[Thu Jun 13 00:16:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:16:07 2013] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Jun 13 00:16:07 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.804
[Thu Jun 13 00:16:07 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 0.58"
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src18.ximg exists
[Thu Jun 13 00:45:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src18.csv
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src18_1.ximg exists
[Thu Jun 13 00:45:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src18.csv
[Thu Jun 13 00:45:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13429_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Thu Jun 13 00:45:36 2013] fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Jun 13 00:45:36 2013] Fit fullrun_ccd1_acisf13429_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Jun 13 01:47:12 2013] Spatial fit model total counts = 15.696400, observed total counts = 17.000000
[Thu Jun 13 01:47:12 2013] Offset between fit and detection position for source 15 = 0.155147 pixels
[Thu Jun 13 01:47:12 2013] 14.977864 total counts/ 0.026364 bgd. counts: snr = 92.082228
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.155147 pixels
  Position = (1144.3, 724.6) = 3 44 43.46 32 8 16.2
  Extent = 0.8 (0.6-1.4)" x 0.4 (0.3-0.6)", rotation angle = 317 (290-338) degrees
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Thu Jun 13 01:47:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 01:47:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 01:47:12 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 01:47:12 2013] Source does appear to be extended
[Thu Jun 13 01:47:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Thu Jun 13 02:01:31 2013] Writing source region out to fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15_src.reg
[Thu Jun 13 02:01:31 2013] Extracting stamp from image fullrun_ccd1_acisf13429_pi14-548_cl_sm2.00.img.gz, (1107, 687) - (1182, 762)
[Thu Jun 13 02:01:31 2013] Writing fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15.gif
[Thu Jun 13 02:11:31 2013] Size of ../../acisf13429/products/events/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15_src.evt.gz[events] = 13 counts
[Thu Jun 13 02:11:31 2013] Mean chipx,y = (145.23, 797.69)
[Thu Jun 13 02:11:31 2013] Mean tdetx,y = (4334.31, 4252.23)
[Thu Jun 13 02:11:31 2013] chipx,y range = (128.00-160.00, 783.00-811.00)
[Thu Jun 13 02:11:31 2013] Size of ../../acisf13429/products/events/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 4 counts
[Thu Jun 13 02:11:32 2013] Not generating rmf since there are only 14 counts
[Thu Jun 13 02:11:32 2013] arf not found, will run specextract
[Thu Jun 13 02:12:02 2013] ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15.warf not found
[Thu Jun 13 02:12:02 2013] ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15.wrmf not found
[Thu Jun 13 02:12:02 2013] Removal of ../../acisf13429/products/spectra/fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15.soff failed
[Thu Jun 13 02:17:03 2013] Spectrum 15 has only 15 counts, deleting rmf
[Thu Jun 13 02:17:03 2013] 201.697
[Thu Jun 13 02:54:35 2013] Updating aperture counts using extracted products
[Thu Jun 13 02:54:35 2013] Total counts from fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15_src.pi.gz = 13.00
[Thu Jun 13 02:54:35 2013] Total counts from fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15_bgd.pi.gz = 4.00
[Thu Jun 13 02:54:35 2013] Got source and background scale factors 0.000001, 0.000025
[Thu Jun 13 02:54:35 2013] User source parameters:
  Position = (1144.3, 724.6) = 3 44 43.46 32 8 16.2
  Extent = 0.8 (0.6-1.4)" x 0.4 (0.3-0.6)", rotation angle = 317 (290-338) degrees
  Source aperture counts = 12.8 +/- 4.7
  Background aperture counts = 0.2
  Rate = 0.001 +/- 0.0005

[Thu Jun 13 02:54:37 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 02:54:37 2013] Using photon index=1.80, rate=0.00144, arf fullrun_ccd1_acisf13429_pi14-548_pass1_cl_src15.arf
[Thu Jun 13 02:54:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 13 02:54:37 2013] Updating source flux to 1.6e-14
[Thu Jun 13 02:54:59 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting