[Wed Jun 12 21:47:07 2013] Detection parameters:
  Position = (773.0, 250.2) = 3 44 34.89 32 11 17.4
  Extent = 0.5" x 0.5", rotation angle = 10 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.001 +/- 0.0003

[Wed Jun 12 21:47:07 2013] Off-axis axis estimate = 2.75'
[Wed Jun 12 21:51:25 2013] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 21:51:25 2013] Initial guess for spatial extent in simple fitting = 0.53"
[Wed Jun 12 21:51:25 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.196
[Wed Jun 12 21:51:25 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 0.53"
[Wed Jun 12 22:19:22 2013] fullrun_ccd0_acisf13429_pi14-548_cl_pass0_src15.ximg exists
[Wed Jun 12 22:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13429_pi14-548_cl_pass0_src15.csv
[Wed Jun 12 22:19:22 2013] fullrun_ccd0_acisf13429_pi14-548_cl_pass0_src15_1.ximg exists
[Wed Jun 12 22:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13429_pi14-548_cl_pass0_src15.csv
[Wed Jun 12 22:19:22 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13429_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13429_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 22:19:22 2013] fullrun_ccd0_acisf13429_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Wed Jun 12 22:19:22 2013] fullrun_ccd0_acisf13429_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Jun 12 22:19:22 2013] Fit fullrun_ccd0_acisf13429_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Jun 12 23:49:03 2013] Spatial fit model total counts = 11.251400, observed total counts = 12.000000
[Wed Jun 12 23:49:03 2013] Offset between fit and detection position for source 16 = 1.046022 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.046022 pixels
  Position = (773.9, 250.8) = 3 44 34.88 32 11 17.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 10.9 +/- 3.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed Jun 12 23:49:03 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 23:49:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 23:49:03 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 23:49:03 2013] Source does appear to be extended
[Wed Jun 12 23:49:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 23:49:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 23:49:29 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Jun 12 23:49:29 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.888
[Wed Jun 12 23:49:29 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 0.39"
[Thu Jun 13 00:16:07 2013] fullrun_ccd0_acisf13429_pi14-548_cl_pass1_src15.ximg exists
[Thu Jun 13 00:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13429_pi14-548_cl_pass1_src15.csv
[Thu Jun 13 00:16:07 2013] fullrun_ccd0_acisf13429_pi14-548_cl_pass1_src15_1.ximg exists
[Thu Jun 13 00:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13429_pi14-548_cl_pass1_src15.csv
[Thu Jun 13 00:16:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13429_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13429_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:16:07 2013] fullrun_ccd0_acisf13429_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Thu Jun 13 00:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13429_pi14-548_cl_pass1_tfrozen_src15.csv
[Thu Jun 13 00:16:07 2013] fullrun_ccd0_acisf13429_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jun 13 00:16:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13429_pi14-548_cl_pass1_tfrozen_src15.csv
[Thu Jun 13 00:16:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13429_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13429_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 01:47:09 2013] Spatial fit model total counts = 10.541000, observed total counts = 12.000000
[Thu Jun 13 01:47:09 2013] Offset between fit and detection position for source 16 = 0.026095 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.026095 pixels
  Position = (773.9, 250.8) = 3 44 34.88 32 11 17.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 10.0 +/- 3.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu Jun 13 01:47:09 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 01:47:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 01:47:09 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 01:47:09 2013] Source does appear to be extended
[Thu Jun 13 01:47:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 01:47:36 2013] Writing source region out to fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16_src.reg
[Thu Jun 13 01:47:36 2013] Extracting stamp from image fullrun_ccd0_acisf13429_pi14-548_cl_sm2.00.img.gz, (755, 232) - (793, 270)
[Thu Jun 13 01:47:36 2013] Writing fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16.gif
[Thu Jun 13 01:55:32 2013] Size of ../../acisf13429/products/events/fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16_src.evt.gz[events] = 10 counts
[Thu Jun 13 01:55:32 2013] Mean chipx,y = (847.10, 842.00)
[Thu Jun 13 01:55:32 2013] Mean tdetx,y = (3903.00, 4284.90)
[Thu Jun 13 01:55:32 2013] chipx,y range = (830.00-862.00, 827.00-861.00)
[Thu Jun 13 01:55:32 2013] Size of ../../acisf13429/products/events/fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 2 counts
[Thu Jun 13 01:55:33 2013] Not generating rmf since there are only 9 counts
[Thu Jun 13 01:55:33 2013] arf not found, will run specextract
[Thu Jun 13 01:56:00 2013] ../../acisf13429/products/spectra/fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16.warf not found
[Thu Jun 13 01:56:00 2013] ../../acisf13429/products/spectra/fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16.wrmf not found
[Thu Jun 13 01:56:00 2013] Removal of ../../acisf13429/products/spectra/fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16.soff failed
[Thu Jun 13 02:01:31 2013] Spectrum 16 has only 10 counts, deleting rmf
[Thu Jun 13 02:01:31 2013] 197.795
[Thu Jun 13 02:54:31 2013] Updating aperture counts using extracted products
[Thu Jun 13 02:54:31 2013] Total counts from fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16_src.pi.gz = 10.00
[Thu Jun 13 02:54:31 2013] Total counts from fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16_bgd.pi.gz = 2.00
[Thu Jun 13 02:54:31 2013] Got source and background scale factors 0.000001, 0.000006
[Thu Jun 13 02:54:31 2013] User source parameters:
  Position = (773.9, 250.8) = 3 44 34.88 32 11 17.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source aperture counts = 9.8 +/- 4.3
  Background aperture counts = 0.2
  Rate = 0.0009 +/- 0.0004

[Thu Jun 13 02:54:33 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 02:54:33 2013] Using photon index=1.80, rate=0.000958, arf fullrun_ccd0_acisf13429_pi14-548_pass1_cl_src16.arf
[Thu Jun 13 02:54:33 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 13 02:54:33 2013] Updating source flux to 1.1e-14
[Thu Jun 13 02:54:50 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting