[Sat May 18 10:39:52 2013] Detection parameters:
  Position = (186.6, 456.3) = 3 44 21.25 32 5 2.0
  Extent = 0.5" x 0.5", rotation angle = 27 degrees
  Source counts = 15.9 +/- 4.0
  Background counts = 0.1
  Rate = 0.002 +/- 0.0004

[Sat May 18 10:39:52 2013] Off-axis axis estimate = 3.91'
[Sat May 18 11:37:31 2013] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Sat May 18 11:37:31 2013] Initial guess for spatial extent in simple fitting = 0.80"
[Sat May 18 11:37:31 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.101
[Sat May 18 11:37:31 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.80"
[Sat May 18 11:52:47 2013] fullrun_ccd2_acisf13428_pi14-548_cl_pass0_src9.ximg exists
[Sat May 18 11:52:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13428_pi14-548_cl_pass0_src9.csv
[Sat May 18 11:52:47 2013] fullrun_ccd2_acisf13428_pi14-548_cl_pass0_src9_1.ximg exists
[Sat May 18 11:52:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13428_pi14-548_cl_pass0_src9.csv
[Sat May 18 11:52:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13428_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13428_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 11:52:47 2013] fullrun_ccd2_acisf13428_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sat May 18 11:52:47 2013] fullrun_ccd2_acisf13428_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 18 11:52:47 2013] Fit fullrun_ccd2_acisf13428_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sat May 18 12:25:04 2013] Spatial fit model total counts = 15.859800, observed total counts = 17.000000
[Sat May 18 12:25:04 2013] Offset between fit and detection position for source 11 = 0.641894 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.641894 pixels
  Position = (187.1, 456.8) = 3 44 21.25 32 5 1.9
  Extent = 0.7 (0.5-1.1)" x 0.4 (0.3-0.5)", rotation angle = 332 (310-356) degrees
  Source counts = 15.7 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sat May 18 12:25:04 2013] Vigneting correction estimate = 1.000000
[Sat May 18 12:25:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 12:25:04 2013] Assessing source extent using major axis lower bound
[Sat May 18 12:25:04 2013] Source does appear to be extended
[Sat May 18 12:25:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Sat May 18 13:14:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 18 13:14:26 2013] Initial guess for spatial extent in simple fitting = 0.55"
[Sat May 18 13:14:26 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.139
[Sat May 18 13:14:26 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.55"
[Sat May 18 13:28:44 2013] fullrun_ccd2_acisf13428_pi14-548_cl_pass1_src9.ximg exists
[Sat May 18 13:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13428_pi14-548_cl_pass1_src9.csv
[Sat May 18 13:28:44 2013] fullrun_ccd2_acisf13428_pi14-548_cl_pass1_src9_1.ximg exists
[Sat May 18 13:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13428_pi14-548_cl_pass1_src9.csv
[Sat May 18 13:28:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13428_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13428_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 13:28:44 2013] fullrun_ccd2_acisf13428_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat May 18 13:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13428_pi14-548_cl_pass1_tfrozen_src9.csv
[Sat May 18 13:28:44 2013] fullrun_ccd2_acisf13428_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat May 18 13:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13428_pi14-548_cl_pass1_tfrozen_src9.csv
[Sat May 18 13:28:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13428_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13428_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 13:59:20 2013] Spatial fit model total counts = 15.360900, observed total counts = 17.000000
[Sat May 18 13:59:20 2013] Offset between fit and detection position for source 11 = 0.084388 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.084388 pixels
  Position = (187.1, 456.8) = 3 44 21.25 32 5 2.0
  Extent = 0.8 (0.6-1.1)" x 0.4 (0.3-0.6)", rotation angle = 332 (308-359) degrees
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sat May 18 13:59:20 2013] Vigneting correction estimate = 1.000000
[Sat May 18 13:59:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 13:59:20 2013] Assessing source extent using major axis lower bound
[Sat May 18 13:59:20 2013] Source does appear to be extended
[Sat May 18 13:59:20 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Sat May 18 14:26:50 2013] Writing source region out to fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11_src.reg
[Sat May 18 14:26:50 2013] Extracting stamp from image fullrun_ccd2_acisf13428_pi14-548_cl_sm2.00.img.gz, (153, 422) - (222, 491)
[Sat May 18 14:26:50 2013] Writing fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11.gif
[Sat May 18 14:31:12 2013] Size of ../../acisf13428/products/events/fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11_src.evt.gz[events] = 16 counts
[Sat May 18 14:31:12 2013] Mean chipx,y = (533.88, 978.50)
[Sat May 18 14:31:12 2013] Mean tdetx,y = (4039.50, 3552.12)
[Sat May 18 14:31:12 2013] chipx,y range = (525.00-546.00, 963.00-995.00)
[Sat May 18 14:31:12 2013] Size of ../../acisf13428/products/events/fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 4 counts
[Sat May 18 14:31:13 2013] Not generating rmf since there are only 14 counts
[Sat May 18 14:31:13 2013] arf not found, will run specextract
[Sat May 18 14:31:44 2013] ../../acisf13428/products/spectra/fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11.warf not found
[Sat May 18 14:31:44 2013] ../../acisf13428/products/spectra/fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11.wrmf not found
[Sat May 18 14:31:44 2013] Removal of ../../acisf13428/products/spectra/fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11.soff failed
[Sat May 18 14:36:41 2013] Spectrum 11 has only 15 counts, deleting rmf
[Sat May 18 14:36:41 2013] 149.895
[Sat May 18 14:55:53 2013] Updating aperture counts using extracted products
[Sat May 18 14:55:53 2013] Total counts from fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11_src.pi.gz = 16.00
[Sat May 18 14:55:53 2013] Total counts from fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11_bgd.pi.gz = 4.00
[Sat May 18 14:55:53 2013] Got source and background scale factors 0.000001, 0.000021
[Sat May 18 14:55:53 2013] User source parameters:
  Position = (187.1, 456.8) = 3 44 21.25 32 5 2.0
  Extent = 0.8 (0.6-1.1)" x 0.4 (0.3-0.6)", rotation angle = 332 (308-359) degrees
  Source aperture counts = 15.8 +/- 5.1
  Background aperture counts = 0.2
  Rate = 0.002 +/- 0.0006

[Sat May 18 14:55:54 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 14:55:54 2013] Using photon index=1.80, rate=0.00162, arf fullrun_ccd2_acisf13428_pi14-548_pass1_cl_src11.arf
[Sat May 18 14:55:54 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 18 14:55:54 2013] Updating source flux to 2.4e-14
[Sat May 18 14:56:17 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting