[Sat May 18 10:39:20 2013] Detection parameters:
  Position = (249.8, 420.2) = 3 45 7.62 32 10 26.8
  Extent = 2.1" x 1.3", rotation angle = 117 degrees
  Source counts = 20.9 +/- 4.8
  Background counts = 2.1
  Rate = 0.002 +/- 0.0005

[Sat May 18 10:39:20 2013] Off-axis axis estimate = 8.35'
[Sat May 18 11:07:57 2013] Using EEF radius (= 3.08 ")to estimate initial spatial extent for simple fitting
[Sat May 18 11:07:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 18 11:07:57 2013] Initial guess for spatial extent in simple fitting = 3.08"
[Sat May 18 11:07:57 2013] source mask rpix=6.3, npix_max = 182, mask sum = 181, frac = 0.991
[Sat May 18 11:07:57 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 3.08"
[Sat May 18 11:37:31 2013] fullrun_ccd1_acisf13428_pi14-548_cl_pass0_src14.ximg exists
[Sat May 18 11:37:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13428_pi14-548_cl_pass0_src14.csv
[Sat May 18 11:37:31 2013] fullrun_ccd1_acisf13428_pi14-548_cl_pass0_src14_1.ximg exists
[Sat May 18 11:37:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13428_pi14-548_cl_pass0_src14.csv
[Sat May 18 11:37:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13428_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13428_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 11:37:31 2013] fullrun_ccd1_acisf13428_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sat May 18 11:37:31 2013] fullrun_ccd1_acisf13428_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May 18 11:37:31 2013] Fit fullrun_ccd1_acisf13428_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sat May 18 12:25:02 2013] Spatial fit model total counts = 25.987600, observed total counts = 29.000000
[Sat May 18 12:25:02 2013] Offset between fit and detection position for source 17 = 0.733752 pixels
[Sat May 18 12:25:02 2013] 26.060730 total counts/ 1.618230 bgd. counts: snr = 19.214341
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.733752 pixels
  Position = (250.5, 420.1) = 3 45 7.61 32 10 26.5
  Extent = 3.0 (2.4-4.0)" x 1.7 (1.2-2.3)", rotation angle = 62 (40-88) degrees
  Source counts = 24.4 +/- 5.1
  Background counts = 1.6
  Rate = 0.003 +/- 0.0006
[Sat May 18 12:25:02 2013] Vigneting correction estimate = 1.000000
[Sat May 18 12:25:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 12:25:02 2013] Assessing source extent using major axis lower bound
[Sat May 18 12:25:02 2013] Source does appear to be extended
[Sat May 18 12:25:02 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Sat May 18 12:47:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 18 12:47:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 18 12:47:13 2013] Initial guess for spatial extent in simple fitting = 2.36"
[Sat May 18 12:47:13 2013] source mask rpix=4.8, npix_max = 112, mask sum = 98, frac = 0.873
[Sat May 18 12:47:13 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 2.36"
[Sat May 18 13:14:25 2013] fullrun_ccd1_acisf13428_pi14-548_cl_pass1_src14.ximg exists
[Sat May 18 13:14:25 2013] fullrun_ccd1_acisf13428_pi14-548_cl_pass1_src14_1.ximg exists
[Sat May 18 13:14:25 2013] Fit fullrun_ccd1_acisf13428_pi14-548_cl_pass1_src14 appears to have run properly
[Sat May 18 13:14:25 2013] fullrun_ccd1_acisf13428_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sat May 18 13:14:25 2013] fullrun_ccd1_acisf13428_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sat May 18 13:14:25 2013] Fit fullrun_ccd1_acisf13428_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Sat May 18 13:59:19 2013] Warning, spatial fit 14 centroid is now closest to src. 14
[Sat May 18 13:59:19 2013] Vigneting correction estimate = 1.000000
[Sat May 18 13:59:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 13:59:19 2013] Assessing source extent using major axis lower bound
[Sat May 18 13:59:19 2013] Source does appear to be extended
[Sat May 18 13:59:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Sat May 18 14:11:20 2013] Writing source region out to fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17_src.reg
[Sat May 18 14:11:20 2013] Extracting stamp from image fullrun_ccd1_acisf13428_pi14-548_cl_sm2.00.img.gz, (114, 283) - (387, 557)
[Sat May 18 14:11:20 2013] Writing fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17.gif
[Sat May 18 14:18:53 2013] Size of ../../acisf13428/products/events/fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17_src.evt.gz[events] = 27 counts
[Sat May 18 14:18:53 2013] Mean chipx,y = (412.33, 130.33)
[Sat May 18 14:18:53 2013] Mean tdetx,y = (5001.67, 4519.33)
[Sat May 18 14:18:53 2013] chipx,y range = (393.00-432.00, 109.00-154.00)
[Sat May 18 14:18:53 2013] Size of ../../acisf13428/products/events/fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 53 counts
[Sat May 18 14:18:55 2013] Not generating rmf since there are only 24 counts
[Sat May 18 14:18:55 2013] arf not found, will run specextract
[Sat May 18 14:19:09 2013] ../../acisf13428/products/spectra/fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17.warf not found
[Sat May 18 14:19:09 2013] ../../acisf13428/products/spectra/fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17.wrmf not found
[Sat May 18 14:19:09 2013] Removal of ../../acisf13428/products/spectra/fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17.soff failed
[Sat May 18 14:26:50 2013] Spectrum 17 has only 24 counts, deleting rmf
[Sat May 18 14:26:50 2013] 155.909
[Sat May 18 14:55:50 2013] Updating aperture counts using extracted products
[Sat May 18 14:55:50 2013] Total counts from fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17_src.pi.gz = 27.00
[Sat May 18 14:55:50 2013] Total counts from fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17_bgd.pi.gz = 53.00
[Sat May 18 14:55:50 2013] Got source and background scale factors 0.000016, 0.000327
[Sat May 18 14:55:50 2013] User source parameters:
  Position = (250.5, 420.1) = 3 45 7.61 32 10 26.5
  Extent = 3.0 (2.4-4.0)" x 1.7 (1.2-2.3)", rotation angle = 62 (40-88) degrees
  Source aperture counts = 24.4 +/- 6.3
  Background aperture counts = 2.6
  Rate = 0.003 +/- 0.0007

[Sat May 18 14:55:52 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 14:55:52 2013] Using photon index=1.80, rate=0.00265, arf fullrun_ccd1_acisf13428_pi14-548_pass1_cl_src17.arf
[Sat May 18 14:55:52 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 18 14:55:52 2013] Updating source flux to 3.9e-14
[Sat May 18 14:56:10 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting