[Tue May 21 06:24:17 2013] Detection parameters:
  Position = (624.2, 1209.5) = 3 44 27.90 32 7 31.3
  Extent = 0.5" x 0.5", rotation angle = 160 degrees
  Source counts = 13.8 +/- 3.7
  Background counts = 0.2
  Rate = 0.001 +/- 0.0004

[Tue May 21 06:24:17 2013] Off-axis axis estimate = 1.32'
[Tue May 21 07:47:04 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue May 21 07:47:04 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Tue May 21 07:47:04 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.912
[Tue May 21 07:47:04 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 0.39"
[Tue May 21 08:25:47 2013] fullrun_ccd3_acisf13427_pi14-548_cl_pass0_src27.ximg exists
[Tue May 21 08:25:47 2013] fullrun_ccd3_acisf13427_pi14-548_cl_pass0_src27_1.ximg exists
[Tue May 21 08:25:47 2013] Fit fullrun_ccd3_acisf13427_pi14-548_cl_pass0_src27 appears to have run properly
[Tue May 21 08:25:47 2013] fullrun_ccd3_acisf13427_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Tue May 21 08:25:47 2013] fullrun_ccd3_acisf13427_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Tue May 21 08:25:47 2013] Fit fullrun_ccd3_acisf13427_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Tue May 21 08:26:02 2013] Spatial fit model total counts = 14.414300, observed total counts = 14.000000
[Tue May 21 08:26:02 2013] Offset between fit and detection position for source 25 = 0.650098 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.650098 pixels
  Position = (624.7, 1210.0) = 3 44 27.90 32 7 31.3
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 14.4 +/- 3.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Tue May 21 08:26:02 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:26:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:26:02 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:26:02 2013] Source does appear to be extended
[Tue May 21 08:26:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 09:45:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 09:45:32 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Tue May 21 09:45:32 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.753
[Tue May 21 09:45:32 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 0.45"
[Tue May 21 10:29:08 2013] fullrun_ccd3_acisf13427_pi14-548_cl_pass1_src27.ximg exists
[Tue May 21 10:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13427_pi14-548_cl_pass1_src27.csv
[Tue May 21 10:29:08 2013] fullrun_ccd3_acisf13427_pi14-548_cl_pass1_src27_1.ximg exists
[Tue May 21 10:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13427_pi14-548_cl_pass1_src27.csv
[Tue May 21 10:29:08 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13427_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13427_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 10:29:08 2013] fullrun_ccd3_acisf13427_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Tue May 21 10:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13427_pi14-548_cl_pass1_tfrozen_src27.csv
[Tue May 21 10:29:08 2013] fullrun_ccd3_acisf13427_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Tue May 21 10:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13427_pi14-548_cl_pass1_tfrozen_src27.csv
[Tue May 21 10:29:08 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13427_pi14-548_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13427_pi14-548_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 10:29:23 2013] Spatial fit model total counts = 12.647200, observed total counts = 16.000000
[Tue May 21 10:29:23 2013] Offset between fit and detection position for source 25 = 0.038708 pixels
[Tue May 21 10:29:23 2013] 13.351801 total counts/ 0.000001 bgd. counts: snr = 12973.678552
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.038708 pixels
  Position = (624.7, 1210.0) = 3 44 27.90 32 7 31.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 13.4 +/- 3.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Tue May 21 10:29:23 2013] Vigneting correction estimate = 1.000000
[Tue May 21 10:29:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 10:29:23 2013] Assessing source extent using major axis lower bound
[Tue May 21 10:29:23 2013] Source does appear to be extended
[Tue May 21 10:29:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:09:06 2013] Writing source region out to fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25_src.reg
[Tue May 21 11:09:06 2013] Extracting stamp from image fullrun_ccd3_acisf13427_pi14-548_cl_sm2.00.img.gz, (602, 1187) - (648, 1233)
[Tue May 21 11:09:06 2013] Writing fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25.gif
[Tue May 21 11:24:09 2013] Size of ../../acisf13427/products/events/fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25_src.evt.gz[events] = 14 counts
[Tue May 21 11:24:09 2013] Mean chipx,y = (829.86, 919.36)
[Tue May 21 11:24:09 2013] Mean tdetx,y = (4212.64, 3890.86)
[Tue May 21 11:24:09 2013] chipx,y range = (811.00-844.00, 907.00-939.00)
[Tue May 21 11:24:09 2013] Size of ../../acisf13427/products/events/fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 3 counts
[Tue May 21 11:24:10 2013] Not generating rmf since there are only 13 counts
[Tue May 21 11:24:10 2013] arf not found, will run specextract
[Tue May 21 11:24:38 2013] ../../acisf13427/products/spectra/fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25.warf not found
[Tue May 21 11:24:38 2013] ../../acisf13427/products/spectra/fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25.wrmf not found
[Tue May 21 11:24:38 2013] Removal of ../../acisf13427/products/spectra/fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25.soff failed
[Tue May 21 11:29:23 2013] Spectrum 25 has only 13 counts, deleting rmf
[Tue May 21 11:29:23 2013] 199.611
[Tue May 21 11:29:41 2013] Updating aperture counts using extracted products
[Tue May 21 11:29:41 2013] Total counts from fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25_src.pi.gz = 14.00
[Tue May 21 11:29:41 2013] Total counts from fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25_bgd.pi.gz = 3.00
[Tue May 21 11:29:41 2013] Got source and background scale factors 0.000001, 0.000009
[Tue May 21 11:29:41 2013] User source parameters:
  Position = (624.7, 1210.0) = 3 44 27.90 32 7 31.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source aperture counts = 13.7 +/- 4.8
  Background aperture counts = 0.3
  Rate = 0.001 +/- 0.0005

[Tue May 21 11:29:42 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 11:29:42 2013] Using photon index=1.80, rate=0.00135, arf fullrun_ccd3_acisf13427_pi14-548_pass1_cl_src25.arf
[Tue May 21 11:29:42 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May 21 11:29:42 2013] Updating source flux to 1.5e-14
[Tue May 21 11:30:07 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting