[Fri May 17 21:37:12 2013] Detection parameters:
  Position = (346.5, 852.8) = 3 44 17.87 32 12 19.7
  Extent = 0.5" x 0.5", rotation angle = 41 degrees
  Source counts = 11.9 +/- 3.5
  Background counts = 0.1
  Rate = 0.001 +/- 0.0003

[Fri May 17 21:37:12 2013] Off-axis axis estimate = 4.41'
[Fri May 17 22:39:12 2013] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:39:12 2013] Initial guess for spatial extent in simple fitting = 0.96"
[Fri May 17 22:39:12 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.039
[Fri May 17 22:39:12 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 0.96"
[Fri May 17 23:02:36 2013] fullrun_ccd2_acisf13425_pi14-548_cl_pass0_src17.ximg exists
[Fri May 17 23:02:36 2013] fullrun_ccd2_acisf13425_pi14-548_cl_pass0_src17_1.ximg exists
[Fri May 17 23:02:36 2013] Fit fullrun_ccd2_acisf13425_pi14-548_cl_pass0_src17 appears to have run properly
[Fri May 17 23:02:36 2013] fullrun_ccd2_acisf13425_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri May 17 23:02:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13425_pi14-548_cl_pass0_tfrozen_src17.csv
[Fri May 17 23:02:36 2013] fullrun_ccd2_acisf13425_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri May 17 23:02:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13425_pi14-548_cl_pass0_tfrozen_src17.csv
[Fri May 17 23:02:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13425_pi14-548_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13425_pi14-548_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 23:34:51 2013] Spatial fit model total counts = 17.783800, observed total counts = 20.000000
[Fri May 17 23:34:51 2013] Offset between fit and detection position for source 14 = 0.761985 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.761985 pixels
  Position = (346.3, 853.5) = 3 44 17.90 32 12 19.8
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 18.0 +/- 4.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri May 17 23:34:51 2013] Vigneting correction estimate = 1.000000
[Fri May 17 23:34:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 23:34:51 2013] Assessing source extent using major axis lower bound
[Fri May 17 23:34:51 2013] Source does appear to be extended
[Fri May 17 23:34:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 00:33:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 18 00:33:55 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Sat May 18 00:33:55 2013] source mask rpix=1.5, npix_max = 16, mask sum = 19, frac = 1.139
[Sat May 18 00:33:55 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 0.76"
[Sat May 18 00:55:56 2013] fullrun_ccd2_acisf13425_pi14-548_cl_pass1_src16.ximg exists
[Sat May 18 00:55:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13425_pi14-548_cl_pass1_src16.csv
[Sat May 18 00:55:56 2013] fullrun_ccd2_acisf13425_pi14-548_cl_pass1_src16_1.ximg exists
[Sat May 18 00:55:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13425_pi14-548_cl_pass1_src16.csv
[Sat May 18 00:55:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13425_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13425_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 00:55:56 2013] fullrun_ccd2_acisf13425_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sat May 18 00:55:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13425_pi14-548_cl_pass1_tfrozen_src16.csv
[Sat May 18 00:55:56 2013] fullrun_ccd2_acisf13425_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sat May 18 00:55:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13425_pi14-548_cl_pass1_tfrozen_src16.csv
[Sat May 18 00:55:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13425_pi14-548_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13425_pi14-548_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 01:29:50 2013] Spatial fit model total counts = 17.580600, observed total counts = 20.000000
[Sat May 18 01:29:50 2013] Offset between fit and detection position for source 14 = 0.099371 pixels
[Sat May 18 01:29:50 2013] 17.736300 total counts/ 0.000000 bgd. counts: snr = 290512797734092.687500
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.099371 pixels
  Position = (346.2, 853.5) = 3 44 17.90 32 12 19.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 17.7 +/- 4.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sat May 18 01:29:50 2013] Vigneting correction estimate = 1.000000
[Sat May 18 01:29:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 01:29:50 2013] Assessing source extent using major axis lower bound
[Sat May 18 01:29:50 2013] Source does appear to be extended
[Sat May 18 01:29:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 02:02:41 2013] Writing source region out to fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14_src.reg
[Sat May 18 02:02:41 2013] Extracting stamp from image fullrun_ccd2_acisf13425_pi14-548_cl_sm2.00.img.gz, (313, 821) - (379, 887)
[Sat May 18 02:02:41 2013] Writing fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14.gif
[Sat May 18 02:11:45 2013] Size of ../../acisf13425/products/events/fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14_src.evt.gz[events] = 19 counts
[Sat May 18 02:11:45 2013] Mean chipx,y = (140.95, 522.79)
[Sat May 18 02:11:45 2013] Mean tdetx,y = (3583.79, 3945.05)
[Sat May 18 02:11:45 2013] chipx,y range = (121.00-156.00, 506.00-540.00)
[Sat May 18 02:11:45 2013] Size of ../../acisf13425/products/events/fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 1 counts
[Sat May 18 02:11:47 2013] Not generating rmf since there are only 17 counts
[Sat May 18 02:11:47 2013] arf not found, will run specextract
[Sat May 18 02:12:12 2013] ../../acisf13425/products/spectra/fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14.warf not found
[Sat May 18 02:12:12 2013] ../../acisf13425/products/spectra/fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14.wrmf not found
[Sat May 18 02:12:12 2013] Removal of ../../acisf13425/products/spectra/fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14.soff failed
[Sat May 18 02:14:53 2013] Spectrum 14 has only 18 counts, deleting rmf
[Sat May 18 02:14:53 2013] 169.783
[Sat May 18 02:35:45 2013] Updating aperture counts using extracted products
[Sat May 18 02:35:45 2013] Total counts from fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14_src.pi.gz = 19.00
[Sat May 18 02:35:45 2013] Total counts from fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14_bgd.pi.gz = 1.00
[Sat May 18 02:35:45 2013] Got source and background scale factors 0.000002, 0.000019
[Sat May 18 02:35:45 2013] User source parameters:
  Position = (346.2, 853.5) = 3 44 17.90 32 12 19.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source aperture counts = 18.9 +/- 5.4
  Background aperture counts = 0.1
  Rate = 0.002 +/- 0.0005

[Sat May 18 02:35:45 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 02:35:45 2013] Using photon index=1.80, rate=0.00179, arf fullrun_ccd2_acisf13425_pi14-548_pass1_cl_src14.arf
[Sat May 18 02:35:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 18 02:35:45 2013] Updating source flux to 2.4e-14
[Sat May 18 02:36:08 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting