[Sat May  4 20:47:55 2013] Detection parameters:
  Position = (981.3, 512.6) = 6 5 46.39 -34 59 34.4
  Extent = 0.5" x 0.5", rotation angle = 148 degrees
  Source counts = 11.0 +/- 3.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0007

[Sat May  4 20:47:55 2013] Off-axis axis estimate = 3.73'
[Sat May  4 20:52:57 2013] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Sat May  4 20:52:57 2013] Initial guess for spatial extent in simple fitting = 0.75"
[Sat May  4 20:52:57 2013] source mask rpix=1.5, npix_max = 16, mask sum = 12, frac = 0.727
[Sat May  4 20:52:57 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.75"
[Sat May  4 20:57:09 2013] fullrun_ccd2_acisf13424_pi14-548_cl_pass0_src2.ximg exists
[Sat May  4 20:57:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13424_pi14-548_cl_pass0_src2.csv
[Sat May  4 20:57:09 2013] fullrun_ccd2_acisf13424_pi14-548_cl_pass0_src2_1.ximg exists
[Sat May  4 20:57:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13424_pi14-548_cl_pass0_src2.csv
[Sat May  4 20:57:09 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13424_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13424_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 20:57:09 2013] fullrun_ccd2_acisf13424_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat May  4 20:57:09 2013] fullrun_ccd2_acisf13424_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May  4 20:57:09 2013] Fit fullrun_ccd2_acisf13424_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May  4 21:01:29 2013] Spatial fit model total counts = 14.270400, observed total counts = 13.000000
[Sat May  4 21:01:29 2013] Offset between fit and detection position for source 4 = 0.491884 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.491884 pixels
  Position = (981.7, 512.8) = 6 5 46.39 -34 59 34.5
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 14.3 +/- 3.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Sat May  4 21:01:29 2013] Vigneting correction estimate = 1.000000
[Sat May  4 21:01:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 21:01:29 2013] Assessing source extent using major axis lower bound
[Sat May  4 21:01:29 2013] Source does appear to be extended
[Sat May  4 21:01:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 21:02:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May  4 21:02:59 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Sat May  4 21:02:59 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.882
[Sat May  4 21:02:59 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.66"
[Sat May  4 21:07:04 2013] fullrun_ccd2_acisf13424_pi14-548_cl_pass1_src2.ximg exists
[Sat May  4 21:07:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13424_pi14-548_cl_pass1_src2.csv
[Sat May  4 21:07:04 2013] fullrun_ccd2_acisf13424_pi14-548_cl_pass1_src2_1.ximg exists
[Sat May  4 21:07:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13424_pi14-548_cl_pass1_src2.csv
[Sat May  4 21:07:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13424_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13424_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 21:07:04 2013] fullrun_ccd2_acisf13424_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat May  4 21:07:04 2013] fullrun_ccd2_acisf13424_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May  4 21:07:04 2013] Fit fullrun_ccd2_acisf13424_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May  4 21:11:25 2013] Spatial fit model total counts = 14.213100, observed total counts = 13.000000
[Sat May  4 21:11:25 2013] Offset between fit and detection position for source 4 = 0.032509 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.032509 pixels
  Position = (981.7, 512.9) = 6 5 46.39 -34 59 34.5
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 14.2 +/- 3.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Sat May  4 21:11:25 2013] Vigneting correction estimate = 1.000000
[Sat May  4 21:11:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 21:11:25 2013] Assessing source extent using major axis lower bound
[Sat May  4 21:11:25 2013] Source does appear to be extended
[Sat May  4 21:11:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 21:16:24 2013] Writing source region out to fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4_src.reg
[Sat May  4 21:16:24 2013] Extracting stamp from image fullrun_ccd2_acisf13424_pi14-548_cl_sm2.00.img.gz, (951, 482) - (1012, 543)
[Sat May  4 21:16:24 2013] Writing fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4.gif
[Sat May  4 21:16:59 2013] Size of ../../acisf13424/products/events/fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4_src.evt.gz[events] = 13 counts
[Sat May  4 21:16:59 2013] Mean chipx,y = (512.85, 913.31)
[Sat May  4 21:16:59 2013] Mean tdetx,y = (3974.31, 3573.15)
[Sat May  4 21:16:59 2013] chipx,y range = (494.00-526.00, 895.00-929.00)
[Sat May  4 21:16:59 2013] Size of ../../acisf13424/products/events/fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 3 counts
[Sat May  4 21:17:01 2013] Not generating rmf since there are only 14 counts
[Sat May  4 21:17:01 2013] arf not found, will run specextract
[Sat May  4 21:17:30 2013] ../../acisf13424/products/spectra/fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4.warf not found
[Sat May  4 21:17:30 2013] ../../acisf13424/products/spectra/fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4.wrmf not found
[Sat May  4 21:17:30 2013] Removal of ../../acisf13424/products/spectra/fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4.soff failed
[Sat May  4 21:19:22 2013] Spectrum 4 has only 14 counts, deleting rmf
[Sat May  4 21:19:22 2013] 172.45
[Sat May  4 21:22:48 2013] Updating aperture counts using extracted products
[Sat May  4 21:22:48 2013] Total counts from fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4_src.pi.gz = 13.00
[Sat May  4 21:22:48 2013] Total counts from fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4_bgd.pi.gz = 3.00
[Sat May  4 21:22:48 2013] Got source and background scale factors 0.000001, 0.000016
[Sat May  4 21:22:48 2013] User source parameters:
  Position = (981.7, 512.9) = 6 5 46.39 -34 59 34.5
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 12.7 +/- 4.7
  Background aperture counts = 0.3
  Rate = 0.003 +/- 0.0009

[Sat May  4 21:22:48 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 21:22:48 2013] Using photon index=1.80, rate=0.00285, arf fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4.arf
[Sat May  4 21:22:48 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May  4 21:22:48 2013] Updating source flux to 3.8e-14
[Sat May  4 21:22:53 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May  4 21:22:54 2013] acisf13424/analysis//spectral/fullrun_ccd2_acisf13424_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete