[Sat May 4 20:47:27 2013] Detection parameters: Position = (574.0, 792.8) = 6 5 31.24 -35 7 22.6 Extent = 0.7" x 0.5", rotation angle = 90 degrees Source counts = 16.9 +/- 4.1 Background counts = 0.1 Rate = 0.003 +/- 0.0008 [Sat May 4 20:47:27 2013] Off-axis axis estimate = 4.94' [Sat May 4 20:51:20 2013] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting [Sat May 4 20:51:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat May 4 20:51:20 2013] Initial guess for spatial extent in simple fitting = 1.15" [Sat May 4 20:51:20 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.110 [Sat May 4 20:51:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.15" [Sat May 4 20:52:57 2013] fullrun_ccd1_acisf13424_pi14-548_cl_pass0_src1.ximg exists [Sat May 4 20:52:57 2013] fullrun_ccd1_acisf13424_pi14-548_cl_pass0_src1_1.ximg exists [Sat May 4 20:52:57 2013] Fit fullrun_ccd1_acisf13424_pi14-548_cl_pass0_src1 appears to have run properly [Sat May 4 20:52:57 2013] fullrun_ccd1_acisf13424_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sat May 4 20:52:57 2013] fullrun_ccd1_acisf13424_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sat May 4 20:52:57 2013] Fit fullrun_ccd1_acisf13424_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sat May 4 21:01:28 2013] Spatial fit model total counts = 16.848300, observed total counts = 17.000000 [Sat May 4 21:01:28 2013] Offset between fit and detection position for source 5 = 0.738290 pixels Spatial fit parameters: Offset between fit and detection position for source 5 = 0.738290 pixels Position = (574.5, 793.3) = 6 5 31.24 -35 7 22.6 Extent = 1.0 (0.7-1.4)" x 0.4 (0.3-0.5)", rotation angle = 90 (75-104) degrees Source counts = 16.9 +/- 4.1 Background counts = 0.0 Rate = 0.003 +/- 0.0008 [Sat May 4 21:01:28 2013] Vigneting correction estimate = 1.000000 [Sat May 4 21:01:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 21:01:28 2013] Assessing source extent using major axis lower bound [Sat May 4 21:01:28 2013] Source does appear to be extended [Sat May 4 21:01:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38 [Sat May 4 21:01:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 4 21:01:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat May 4 21:01:40 2013] Initial guess for spatial extent in simple fitting = 0.69" [Sat May 4 21:01:40 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.830 [Sat May 4 21:01:40 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.69" [Sat May 4 21:02:59 2013] fullrun_ccd1_acisf13424_pi14-548_cl_pass1_src1.ximg exists [Sat May 4 21:02:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13424_pi14-548_cl_pass1_src1.csv [Sat May 4 21:02:59 2013] fullrun_ccd1_acisf13424_pi14-548_cl_pass1_src1_1.ximg exists [Sat May 4 21:02:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13424_pi14-548_cl_pass1_src1.csv [Sat May 4 21:02:59 2013] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf13424_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf13424_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 21:02:59 2013] fullrun_ccd1_acisf13424_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Sat May 4 21:02:59 2013] fullrun_ccd1_acisf13424_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Sat May 4 21:02:59 2013] Fit fullrun_ccd1_acisf13424_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Sat May 4 21:11:25 2013] Spatial fit model total counts = 15.861000, observed total counts = 17.000000 [Sat May 4 21:11:25 2013] Offset between fit and detection position for source 5 = 0.062436 pixels Spatial fit parameters: Offset between fit and detection position for source 5 = 0.062436 pixels Position = (574.4, 793.3) = 6 5 31.25 -35 7 22.6 Extent = 1.1 (0.8-1.5)" x 0.4 (0.3-0.5)", rotation angle = 90 (75-103) degrees Source counts = 15.9 +/- 4.0 Background counts = 0.0 Rate = 0.003 +/- 0.0008 [Sat May 4 21:11:25 2013] Vigneting correction estimate = 1.000000 [Sat May 4 21:11:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 21:11:25 2013] Assessing source extent using major axis lower bound [Sat May 4 21:11:25 2013] Source does appear to be extended [Sat May 4 21:11:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.40 [Sat May 4 21:13:26 2013] Writing source region out to fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5_src.reg [Sat May 4 21:13:26 2013] Extracting stamp from image fullrun_ccd1_acisf13424_pi14-548_cl_sm2.00.img.gz, (525, 744) - (623, 842) [Sat May 4 21:13:26 2013] Writing fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5.gif [Sat May 4 21:13:28 2013] Size of ../../acisf13424/products/events/fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5_src.evt.gz[events] = 17 counts [Sat May 4 21:13:28 2013] Mean chipx,y = (318.24, 585.06) [Sat May 4 21:13:28 2013] Mean tdetx,y = (4546.94, 4425.24) [Sat May 4 21:13:28 2013] chipx,y range = (305.00-334.00, 567.00-599.00) [Sat May 4 21:13:28 2013] Size of ../../acisf13424/products/events/fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 7 counts [Sat May 4 21:13:29 2013] Not generating rmf since there are only 15 counts [Sat May 4 21:13:29 2013] arf not found, will run specextract [Sat May 4 21:13:53 2013] ../../acisf13424/products/spectra/fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5.warf not found [Sat May 4 21:13:53 2013] ../../acisf13424/products/spectra/fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5.wrmf not found [Sat May 4 21:13:53 2013] Removal of ../../acisf13424/products/spectra/fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5.soff failed [Sat May 4 21:16:24 2013] Spectrum 5 has only 16 counts, deleting rmf [Sat May 4 21:16:24 2013] 179.66 [Sat May 4 21:22:47 2013] Updating aperture counts using extracted products [Sat May 4 21:22:47 2013] Total counts from fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5_src.pi.gz = 17.00 [Sat May 4 21:22:47 2013] Total counts from fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5_bgd.pi.gz = 7.00 [Sat May 4 21:22:47 2013] Got source and background scale factors 0.000001, 0.000042 [Sat May 4 21:22:47 2013] User source parameters: Position = (574.4, 793.3) = 6 5 31.25 -35 7 22.6 Extent = 1.1 (0.8-1.5)" x 0.4 (0.3-0.5)", rotation angle = 90 (75-103) degrees Source aperture counts = 16.8 +/- 5.2 Background aperture counts = 0.2 Rate = 0.003 +/- 0.001 [Sat May 4 21:22:48 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 21:22:48 2013] Using photon index=1.80, rate=0.00318, arf fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5.arf [Sat May 4 21:22:48 2013] Assuming count rate is from the 0.20-8.00 bandpass [Sat May 4 21:22:48 2013] Updating source flux to 4.1e-14 [Sat May 4 21:22:52 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting [Sat May 4 21:22:53 2013] acisf13424/analysis//spectral/fullrun_ccd1_acisf13424_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete