[Fri May  3 06:00:03 2013] Detection parameters:
  Position = (703.9, 886.1) = 16 9 35.72 53 42 59.9
  Extent = 0.5" x 0.5", rotation angle = 27 degrees
  Source counts = 17.6 +/- 4.2
  Background counts = 0.4
  Rate = 0.002 +/- 0.0004

[Fri May  3 06:00:03 2013] Off-axis axis estimate = 3.05'
[Fri May  3 06:49:46 2013] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Fri May  3 06:49:46 2013] Initial guess for spatial extent in simple fitting = 0.59"
[Fri May  3 06:49:46 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.386
[Fri May  3 06:49:46 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.59"
[Fri May  3 07:03:22 2013] fullrun_ccd7_acisf13418_pi14-548_cl_pass0_src5.ximg exists
[Fri May  3 07:03:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13418_pi14-548_cl_pass0_src5.csv
[Fri May  3 07:03:22 2013] fullrun_ccd7_acisf13418_pi14-548_cl_pass0_src5_1.ximg exists
[Fri May  3 07:03:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13418_pi14-548_cl_pass0_src5.csv
[Fri May  3 07:03:22 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13418_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13418_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 07:03:22 2013] fullrun_ccd7_acisf13418_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri May  3 07:03:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13418_pi14-548_cl_pass0_tfrozen_src5.csv
[Fri May  3 07:03:22 2013] fullrun_ccd7_acisf13418_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May  3 07:03:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13418_pi14-548_cl_pass0_tfrozen_src5.csv
[Fri May  3 07:03:22 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13418_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13418_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 07:03:26 2013] Spatial fit model total counts = 17.549800, observed total counts = 19.000000
[Fri May  3 07:03:26 2013] Offset between fit and detection position for source 10 = 0.672845 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.672845 pixels
  Position = (704.4, 886.6) = 16 9 35.72 53 42 59.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 18.1 +/- 4.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri May  3 07:03:26 2013] Vigneting correction estimate = 1.000000
[Fri May  3 07:03:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 07:03:26 2013] Assessing source extent using major axis lower bound
[Fri May  3 07:03:26 2013] Source does appear to be extended
[Fri May  3 07:03:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 07:41:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 07:41:45 2013] Initial guess for spatial extent in simple fitting = 0.48"
[Fri May  3 07:41:45 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.021
[Fri May  3 07:41:45 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.48"
[Fri May  3 07:54:45 2013] fullrun_ccd7_acisf13418_pi14-548_cl_pass1_src5.ximg exists
[Fri May  3 07:54:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13418_pi14-548_cl_pass1_src5.csv
[Fri May  3 07:54:45 2013] fullrun_ccd7_acisf13418_pi14-548_cl_pass1_src5_1.ximg exists
[Fri May  3 07:54:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13418_pi14-548_cl_pass1_src5.csv
[Fri May  3 07:54:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13418_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13418_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 07:54:45 2013] fullrun_ccd7_acisf13418_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri May  3 07:54:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13418_pi14-548_cl_pass1_tfrozen_src5.csv
[Fri May  3 07:54:45 2013] fullrun_ccd7_acisf13418_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May  3 07:54:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13418_pi14-548_cl_pass1_tfrozen_src5.csv
[Fri May  3 07:54:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13418_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13418_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 07:54:50 2013] Spatial fit model total counts = 17.644600, observed total counts = 19.000000
[Fri May  3 07:54:50 2013] Offset between fit and detection position for source 10 = 0.029696 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.029696 pixels
  Position = (704.4, 886.6) = 16 9 35.72 53 42 59.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 18.2 +/- 4.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri May  3 07:54:50 2013] Vigneting correction estimate = 1.000000
[Fri May  3 07:54:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 07:54:50 2013] Assessing source extent using major axis lower bound
[Fri May  3 07:54:50 2013] Source does appear to be extended
[Fri May  3 07:54:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 08:03:16 2013] Writing source region out to fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10_src.reg
[Fri May  3 08:03:16 2013] Extracting stamp from image fullrun_ccd7_acisf13418_pi14-548_cl_sm2.00.img.gz, (682, 864) - (727, 909)
[Fri May  3 08:03:16 2013] Writing fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10.gif
[Fri May  3 08:04:26 2013] Size of ../../acisf13418/products/events/fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10_src.evt.gz[events] = 18 counts
[Fri May  3 08:04:26 2013] Mean chipx,y = (342.56, 847.28)
[Fri May  3 08:04:26 2013] Mean tdetx,y = (4259.56, 2549.28)
[Fri May  3 08:04:26 2013] chipx,y range = (323.00-359.00, 828.00-862.00)
[Fri May  3 08:04:26 2013] Size of ../../acisf13418/products/events/fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 7 counts
[Fri May  3 08:04:27 2013] Not generating rmf since there are only 18 counts
[Fri May  3 08:04:27 2013] arf not found, will run specextract
[Fri May  3 08:04:34 2013] ../../acisf13418/products/spectra/fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10.warf not found
[Fri May  3 08:04:34 2013] ../../acisf13418/products/spectra/fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10.wrmf not found
[Fri May  3 08:04:34 2013] Removal of ../../acisf13418/products/spectra/fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10.soff failed
[Fri May  3 08:08:39 2013] Spectrum 10 has only 18 counts, deleting rmf
[Fri May  3 08:08:39 2013] 227.398
[Fri May  3 08:08:43 2013] Updating aperture counts using extracted products
[Fri May  3 08:08:43 2013] Total counts from fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10_src.pi.gz = 18.00
[Fri May  3 08:08:43 2013] Total counts from fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10_bgd.pi.gz = 7.00
[Fri May  3 08:08:43 2013] Got source and background scale factors 0.000001, 0.000009
[Fri May  3 08:08:43 2013] User source parameters:
  Position = (704.4, 886.6) = 16 9 35.72 53 42 59.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source aperture counts = 17.4 +/- 5.3
  Background aperture counts = 0.6
  Rate = 0.002 +/- 0.0005

[Fri May  3 08:08:45 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 08:08:45 2013] Using photon index=1.80, rate=0.00184, arf fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10.arf
[Fri May  3 08:08:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 08:08:45 2013] Updating source flux to 1.5e-14
[Fri May  3 08:08:50 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 08:08:51 2013] acisf13418/analysis//spectral/fullrun_ccd7_acisf13418_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete