[Wed May  1 06:57:49 2013] Detection parameters:
  Position = (347.2, 351.7) = 0 40 56.54 -44 10 23.4
  Extent = 1.0" x 0.5", rotation angle = 67 degrees
  Source counts = 15.8 +/- 4.0
  Background counts = 0.2
  Rate = 0.002 +/- 0.0005

[Wed May  1 06:57:49 2013] Off-axis axis estimate = 4.55'
[Wed May  1 07:10:59 2013] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Wed May  1 07:10:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 07:10:59 2013] Initial guess for spatial extent in simple fitting = 1.01"
[Wed May  1 07:10:59 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Wed May  1 07:10:59 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 1.01"
[Wed May  1 07:17:56 2013] fullrun_ccd3_acisf13395_pi14-548_cl_pass0_src5.ximg exists
[Wed May  1 07:17:56 2013] fullrun_ccd3_acisf13395_pi14-548_cl_pass0_src5_1.ximg exists
[Wed May  1 07:17:56 2013] Fit fullrun_ccd3_acisf13395_pi14-548_cl_pass0_src5 appears to have run properly
[Wed May  1 07:17:56 2013] fullrun_ccd3_acisf13395_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed May  1 07:17:56 2013] fullrun_ccd3_acisf13395_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May  1 07:17:56 2013] Fit fullrun_ccd3_acisf13395_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May  1 07:18:00 2013] Spatial fit model total counts = 16.899300, observed total counts = 17.000000
[Wed May  1 07:18:00 2013] Offset between fit and detection position for source 13 = 2.086936 pixels
[Wed May  1 07:18:00 2013] 16.162160 total counts/ 4.261460 bgd. counts: snr = 5.764920
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.086936 pixels
  Position = (348.3, 353.5) = 0 40 56.51 -44 10 22.8
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 11.9 +/- 4.0
  Background counts = 4.3
  Rate = 0.001 +/- 0.0005
[Wed May  1 07:18:00 2013] Vigneting correction estimate = 1.000000
[Wed May  1 07:18:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 07:18:00 2013] Assessing source extent using major axis lower bound
[Wed May  1 07:18:00 2013] Source does appear to be extended
[Wed May  1 07:18:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 07:34:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 07:34:47 2013] Initial guess for spatial extent in simple fitting = 0.44"
[Wed May  1 07:34:47 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.152
[Wed May  1 07:34:47 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.44"
[Wed May  1 07:40:44 2013] fullrun_ccd3_acisf13395_pi14-548_cl_pass1_src5.ximg exists
[Wed May  1 07:40:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13395_pi14-548_cl_pass1_src5.csv
[Wed May  1 07:40:44 2013] fullrun_ccd3_acisf13395_pi14-548_cl_pass1_src5_1.ximg exists
[Wed May  1 07:40:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13395_pi14-548_cl_pass1_src5.csv
[Wed May  1 07:40:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13395_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13395_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 07:40:44 2013] fullrun_ccd3_acisf13395_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed May  1 07:40:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13395_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed May  1 07:40:44 2013] fullrun_ccd3_acisf13395_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May  1 07:40:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13395_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed May  1 07:40:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13395_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13395_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 07:40:47 2013] Spatial fit model total counts = 12.339500, observed total counts = 16.000000
[Wed May  1 07:40:47 2013] Offset between fit and detection position for source 13 = 0.088036 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.088036 pixels
  Position = (348.3, 353.5) = 0 40 56.51 -44 10 22.7
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 11.1 +/- 3.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Wed May  1 07:40:47 2013] Vigneting correction estimate = 1.000000
[Wed May  1 07:40:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 07:40:47 2013] Assessing source extent using major axis lower bound
[Wed May  1 07:40:47 2013] Source does appear to be extended
[Wed May  1 07:40:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 07:47:43 2013] Writing source region out to fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13_src.reg
[Wed May  1 07:47:43 2013] Extracting stamp from image fullrun_ccd3_acisf13395_pi14-548_cl_sm2.00.img.gz, (328, 333) - (369, 374)
[Wed May  1 07:47:43 2013] Writing fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13.gif
[Wed May  1 07:49:37 2013] Size of ../../acisf13395/products/events/fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13_src.evt.gz[events] = 12 counts
[Wed May  1 07:49:37 2013] Mean chipx,y = (996.83, 606.83)
[Wed May  1 07:49:37 2013] Mean tdetx,y = (4525.17, 4057.83)
[Wed May  1 07:49:37 2013] chipx,y range = (980.00-1013.00, 589.00-623.00)
[Wed May  1 07:49:37 2013] Size of ../../acisf13395/products/events/fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 4 counts
[Wed May  1 07:49:38 2013] Not generating rmf since there are only 11 counts
[Wed May  1 07:49:38 2013] arf not found, will run specextract
[Wed May  1 07:50:03 2013] ../../acisf13395/products/spectra/fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13.warf not found
[Wed May  1 07:50:03 2013] ../../acisf13395/products/spectra/fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13.wrmf not found
[Wed May  1 07:50:03 2013] Removal of ../../acisf13395/products/spectra/fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13.soff failed
[Wed May  1 07:53:35 2013] Spectrum 13 has only 11 counts, deleting rmf
[Wed May  1 07:53:35 2013] 194.356
[Wed May  1 07:53:39 2013] Updating aperture counts using extracted products
[Wed May  1 07:53:39 2013] Total counts from fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13_src.pi.gz = 12.00
[Wed May  1 07:53:39 2013] Total counts from fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13_bgd.pi.gz = 4.00
[Wed May  1 07:53:39 2013] Got source and background scale factors 0.000001, 0.000007
[Wed May  1 07:53:39 2013] User source parameters:
  Position = (348.3, 353.5) = 0 40 56.51 -44 10 22.7
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source aperture counts = 11.7 +/- 4.6
  Background aperture counts = 0.3
  Rate = 0.001 +/- 0.0006

[Wed May  1 07:53:40 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 07:53:40 2013] Using photon index=1.80, rate=0.0014, arf fullrun_ccd3_acisf13395_pi14-548_pass1_cl_src13.arf
[Wed May  1 07:53:40 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 07:53:40 2013] Updating source flux to 1.7e-14
[Wed May  1 07:53:45 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting