[Mon Jun  3 13:48:03 2013] Detection parameters:
  Position = (847.2, 1311.6) = 1 2 35.44 -21 34 46.9
  Extent = 0.5" x 0.5", rotation angle = 48 degrees
  Source counts = 20.6 +/- 4.6
  Background counts = 0.4
  Rate = 0.0004 +/- 9e-05

[Mon Jun  3 13:48:03 2013] Off-axis axis estimate = 1.41'
[Mon Jun  3 14:03:58 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 14:03:58 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jun  3 14:03:58 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.903
[Mon Jun  3 14:03:58 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 0.39"
[Mon Jun  3 14:50:13 2013] fullrun_ccd1_acisf13392_pi14-548_cl_pass0_src13.ximg exists
[Mon Jun  3 14:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13392_pi14-548_cl_pass0_src13.csv
[Mon Jun  3 14:50:13 2013] fullrun_ccd1_acisf13392_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Jun  3 14:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13392_pi14-548_cl_pass0_src13.csv
[Mon Jun  3 14:50:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13392_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13392_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 14:50:13 2013] fullrun_ccd1_acisf13392_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Jun  3 14:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13392_pi14-548_cl_pass0_tfrozen_src13.csv
[Mon Jun  3 14:50:13 2013] fullrun_ccd1_acisf13392_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jun  3 14:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13392_pi14-548_cl_pass0_tfrozen_src13.csv
[Mon Jun  3 14:50:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13392_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13392_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:12:21 2013] Spatial fit model total counts = 21.239700, observed total counts = 25.000000
[Mon Jun  3 16:12:21 2013] Offset between fit and detection position for source 9 = 0.704106 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.704106 pixels
  Position = (847.7, 1312.1) = 1 2 35.44 -21 34 46.9
  Extent = 0.4 (0.3-0.6)" x 0.3 (0.2-0.4)", rotation angle = 131 (109-155) degrees
  Source counts = 20.7 +/- 4.6
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Mon Jun  3 16:12:21 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:12:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:12:21 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 16:12:21 2013] Source does appear to be extended
[Mon Jun  3 16:12:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Mon Jun  3 16:26:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:26:51 2013] Initial guess for spatial extent in simple fitting = 0.35"
[Mon Jun  3 16:26:51 2013] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.026
[Mon Jun  3 16:26:51 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 0.35"
[Mon Jun  3 17:09:20 2013] fullrun_ccd1_acisf13392_pi14-548_cl_pass1_src12.ximg exists
[Mon Jun  3 17:09:20 2013] fullrun_ccd1_acisf13392_pi14-548_cl_pass1_src12_1.ximg exists
[Mon Jun  3 17:09:20 2013] Fit fullrun_ccd1_acisf13392_pi14-548_cl_pass1_src12 appears to have run properly
[Mon Jun  3 17:09:20 2013] fullrun_ccd1_acisf13392_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Mon Jun  3 17:09:20 2013] fullrun_ccd1_acisf13392_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jun  3 17:09:20 2013] Fit fullrun_ccd1_acisf13392_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Jun  3 18:15:44 2013] Spatial fit model total counts = 24.650800, observed total counts = 25.000000
[Mon Jun  3 18:15:44 2013] Offset between fit and detection position for source 9 = 0.034372 pixels
[Mon Jun  3 18:15:44 2013] 24.116550 total counts/ 3.205450 bgd. counts: snr = 11.679718
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.034372 pixels
  Position = (847.7, 1312.1) = 1 2 35.44 -21 34 46.9
  Extent = 0.4 (0.3-0.6)" x 0.3 (0.2-0.4)", rotation angle = 129 (102-160) degrees
  Source counts = 20.9 +/- 4.9
  Background counts = 3.2
  Rate = 0.0004 +/- 0.0001
[Mon Jun  3 18:15:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 18:15:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 18:15:44 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 18:15:44 2013] Source does appear to be extended
[Mon Jun  3 18:15:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Mon Jun  3 18:21:12 2013] Writing source region out to fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9_src.reg
[Mon Jun  3 18:21:12 2013] Extracting stamp from image fullrun_ccd1_acisf13392_pi14-548_cl_sm2.00.img.gz, (828, 1292) - (868, 1332)
[Mon Jun  3 18:21:12 2013] Writing fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9.gif
[Mon Jun  3 18:27:48 2013] Size of ../../acisf13392/products/events/fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9_src.evt.gz[events] = 20 counts
[Mon Jun  3 18:27:48 2013] Mean chipx,y = (51.45, 917.75)
[Mon Jun  3 18:27:48 2013] Mean tdetx,y = (4214.25, 4158.45)
[Mon Jun  3 18:27:48 2013] chipx,y range = (34.00-67.00, 897.00-932.00)
[Mon Jun  3 18:27:48 2013] Size of ../../acisf13392/products/events/fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 5 counts
[Mon Jun  3 18:27:49 2013] Not generating rmf since there are only 20 counts
[Mon Jun  3 18:27:49 2013] arf not found, will run specextract
[Mon Jun  3 18:28:15 2013] ../../acisf13392/products/spectra/fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9.warf not found
[Mon Jun  3 18:28:15 2013] ../../acisf13392/products/spectra/fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9.wrmf not found
[Mon Jun  3 18:28:15 2013] Removal of ../../acisf13392/products/spectra/fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9.soff failed
[Mon Jun  3 18:31:36 2013] Spectrum 9 has only 21 counts, deleting rmf
[Mon Jun  3 18:31:36 2013] 194.444
[Mon Jun  3 18:58:33 2013] Updating aperture counts using extracted products
[Mon Jun  3 18:58:33 2013] Total counts from fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9_src.pi.gz = 20.00
[Mon Jun  3 18:58:33 2013] Total counts from fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9_bgd.pi.gz = 5.00
[Mon Jun  3 18:58:33 2013] Got source and background scale factors 0.000000, 0.000007
[Mon Jun  3 18:58:33 2013] User source parameters:
  Position = (847.7, 1312.1) = 1 2 35.44 -21 34 46.9
  Extent = 0.4 (0.3-0.6)" x 0.3 (0.2-0.4)", rotation angle = 129 (102-160) degrees
  Source aperture counts = 19.8 +/- 5.6
  Background aperture counts = 0.2
  Rate = 0.0004 +/- 0.0001

[Mon Jun  3 18:58:34 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 18:58:34 2013] Using photon index=1.80, rate=0.000419, arf fullrun_ccd1_acisf13392_pi14-548_pass1_cl_src9.arf
[Mon Jun  3 18:58:34 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun  3 18:58:34 2013] Updating source flux to 5.1e-15
[Mon Jun  3 18:58:45 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting