[Sun May 12 11:17:11 2013] Detection parameters:
  Position = (373.6, 717.6) = 1 2 51.20 -22 7 31.4
  Extent = 2.2" x 1.2", rotation angle = 154 degrees
  Source counts = 40.5 +/- 6.9
  Background counts = 6.5
  Rate = 0.0009 +/- 0.0001

[Sun May 12 11:17:11 2013] Off-axis axis estimate = 6.41'
[Sun May 12 11:58:25 2013] Using EEF radius (= 1.85 ")to estimate initial spatial extent for simple fitting
[Sun May 12 11:58:25 2013] Initial guess for spatial extent in simple fitting = 1.85"
[Sun May 12 11:58:25 2013] source mask rpix=3.8, npix_max = 72, mask sum = 81, frac = 1.120
[Sun May 12 11:58:25 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 1.85"
[Sun May 12 12:12:09 2013] fullrun_ccd2_acisf13391_pi14-548_cl_pass0_src7.ximg exists
[Sun May 12 12:12:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13391_pi14-548_cl_pass0_src7.csv
[Sun May 12 12:12:09 2013] fullrun_ccd2_acisf13391_pi14-548_cl_pass0_src7_1.ximg exists
[Sun May 12 12:12:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13391_pi14-548_cl_pass0_src7.csv
[Sun May 12 12:12:09 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13391_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13391_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 12:12:09 2013] fullrun_ccd2_acisf13391_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun May 12 12:12:09 2013] fullrun_ccd2_acisf13391_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 12 12:12:09 2013] Fit fullrun_ccd2_acisf13391_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun May 12 12:44:30 2013] Spatial fit model total counts = 41.772500, observed total counts = 43.000000
[Sun May 12 12:44:30 2013] Offset between fit and detection position for source 8 = 1.366316 pixels
[Sun May 12 12:44:30 2013] 43.077800 total counts/ 11.875900 bgd. counts: snr = 9.054152
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.366316 pixels
  Position = (372.3, 718.1) = 1 2 51.26 -22 7 31.5
  Extent = 1.5 (1.0-2.1)", rotation angle = 0
  Source counts = 31.2 +/- 6.6
  Background counts = 11.9
  Rate = 0.0007 +/- 0.0001
[Sun May 12 12:44:31 2013] Vigneting correction estimate = 1.000000
[Sun May 12 12:44:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 12:44:31 2013] Assessing source extent using major axis lower bound
[Sun May 12 12:44:31 2013] Source does appear to be extended
[Sun May 12 12:44:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 13:20:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 13:20:44 2013] Initial guess for spatial extent in simple fitting = 1.48"
[Sun May 12 13:20:44 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 1.000
[Sun May 12 13:20:44 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 1.48"
[Sun May 12 13:34:07 2013] fullrun_ccd2_acisf13391_pi14-548_cl_pass1_src7.ximg exists
[Sun May 12 13:34:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13391_pi14-548_cl_pass1_src7.csv
[Sun May 12 13:34:07 2013] fullrun_ccd2_acisf13391_pi14-548_cl_pass1_src7_1.ximg exists
[Sun May 12 13:34:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13391_pi14-548_cl_pass1_src7.csv
[Sun May 12 13:34:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13391_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13391_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 13:34:07 2013] fullrun_ccd2_acisf13391_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun May 12 13:34:07 2013] fullrun_ccd2_acisf13391_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 12 13:34:07 2013] Fit fullrun_ccd2_acisf13391_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun May 12 14:08:17 2013] Spatial fit model total counts = 34.052400, observed total counts = 39.000000
[Sun May 12 14:08:17 2013] Offset between fit and detection position for source 8 = 0.940811 pixels
[Sun May 12 14:08:17 2013] 36.107953 total counts/ 0.140053 bgd. counts: snr = 96.110066
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.940811 pixels
  Position = (372.4, 717.1) = 1 2 51.26 -22 7 31.9
  Extent = 2.2 (1.6-2.9)" x 0.9 (0.7-1.2)", rotation angle = 42 (29-52) degrees
  Source counts = 36.0 +/- 6.0
  Background counts = 0.1
  Rate = 0.0008 +/- 0.0001
[Sun May 12 14:08:17 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:08:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:08:17 2013] Assessing source extent using major axis lower bound
[Sun May 12 14:08:17 2013] Source does appear to be extended
[Sun May 12 14:08:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sun May 12 14:22:36 2013] Writing source region out to fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8_src.reg
[Sun May 12 14:22:36 2013] Extracting stamp from image fullrun_ccd2_acisf13391_pi14-548_cl_sm2.00.img.gz, (274, 618) - (471, 816)
[Sun May 12 14:22:36 2013] Writing fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8.gif
[Sun May 12 14:25:47 2013] Size of ../../acisf13391/products/events/fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8_src.evt.gz[events] = 41 counts
[Sun May 12 14:25:47 2013] Mean chipx,y = (355.00, 320.22)
[Sun May 12 14:25:47 2013] Mean tdetx,y = (3381.22, 3731.00)
[Sun May 12 14:25:47 2013] chipx,y range = (329.00-379.00, 301.00-346.00)
[Sun May 12 14:25:47 2013] Size of ../../acisf13391/products/events/fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 127 counts
[Sun May 12 14:25:48 2013] Not generating rmf since there are only 35 counts
[Sun May 12 14:25:48 2013] arf not found, will run specextract
[Sun May 12 14:26:11 2013] ../../acisf13391/products/spectra/fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8.warf not found
[Sun May 12 14:26:11 2013] ../../acisf13391/products/spectra/fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8.wrmf not found
[Sun May 12 14:26:11 2013] Removal of ../../acisf13391/products/spectra/fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8.soff failed
[Sun May 12 14:30:16 2013] Spectrum 8 has only 36 counts, deleting rmf
[Sun May 12 14:30:16 2013] 174.957
[Sun May 12 14:43:56 2013] Updating aperture counts using extracted products
[Sun May 12 14:43:56 2013] Total counts from fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8_src.pi.gz = 41.00
[Sun May 12 14:43:56 2013] Total counts from fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8_bgd.pi.gz = 127.00
[Sun May 12 14:43:56 2013] Got source and background scale factors 0.000006, 0.000168
[Sun May 12 14:43:56 2013] User source parameters:
  Position = (372.4, 717.1) = 1 2 51.26 -22 7 31.9
  Extent = 2.2 (1.6-2.9)" x 0.9 (0.7-1.2)", rotation angle = 42 (29-52) degrees
  Source aperture counts = 36.6 +/- 7.5
  Background aperture counts = 4.4
  Rate = 0.0008 +/- 0.0002

[Sun May 12 14:43:57 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 14:43:57 2013] Using photon index=1.80, rate=0.000775, arf fullrun_ccd2_acisf13391_pi14-548_pass1_cl_src8.arf
[Sun May 12 14:43:57 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 14:43:57 2013] Updating source flux to 1.1e-14
[Sun May 12 14:44:11 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting