[Sun May 12 11:16:48 2013] Detection parameters:
  Position = (952.3, 801.9) = 1 3 7.32 -22 15 29.1
  Extent = 0.5" x 0.5", rotation angle = 59 degrees
  Source counts = 10.2 +/- 3.3
  Background counts = 0.8
  Rate = 0.0002 +/- 7e-05

[Sun May 12 11:16:48 2013] Off-axis axis estimate = 2.44'
[Sun May 12 11:30:47 2013] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Sun May 12 11:30:47 2013] Initial guess for spatial extent in simple fitting = 0.48"
[Sun May 12 11:30:47 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.023
[Sun May 12 11:30:47 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 0.48"
[Sun May 12 11:58:25 2013] fullrun_ccd1_acisf13391_pi14-548_cl_pass0_src14.ximg exists
[Sun May 12 11:58:25 2013] fullrun_ccd1_acisf13391_pi14-548_cl_pass0_src14_1.ximg exists
[Sun May 12 11:58:25 2013] Fit fullrun_ccd1_acisf13391_pi14-548_cl_pass0_src14 appears to have run properly
[Sun May 12 11:58:25 2013] fullrun_ccd1_acisf13391_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sun May 12 11:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13391_pi14-548_cl_pass0_tfrozen_src14.csv
[Sun May 12 11:58:25 2013] fullrun_ccd1_acisf13391_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sun May 12 11:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13391_pi14-548_cl_pass0_tfrozen_src14.csv
[Sun May 12 11:58:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13391_pi14-548_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13391_pi14-548_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 12:44:29 2013] Source 10 is offset by -1.135395 and -0.591371 pixels which is larger than
2 X fitted extent = 0.491516 x 2.473756, not incorporating fit results
[Sun May 12 12:44:29 2013] Vigneting correction estimate = 1.000000
[Sun May 12 12:44:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 12:44:29 2013] Assessing source extent using major
[Sun May 12 12:44:29 2013] Source does appear to be extended
[Sun May 12 12:44:29 2013] Computing asymmetry using major and minor axis, asym = 1.02
[Sun May 12 12:55:13 2013] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Sun May 12 12:55:13 2013] Initial guess for spatial extent in simple fitting = 0.48"
[Sun May 12 12:55:13 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.023
[Sun May 12 12:55:13 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 0.48"
[Sun May 12 13:20:44 2013] fullrun_ccd1_acisf13391_pi14-548_cl_pass1_src14.ximg exists
[Sun May 12 13:20:44 2013] fullrun_ccd1_acisf13391_pi14-548_cl_pass1_src14_1.ximg exists
[Sun May 12 13:20:44 2013] Fit fullrun_ccd1_acisf13391_pi14-548_cl_pass1_src14 appears to have run properly
[Sun May 12 13:20:44 2013] fullrun_ccd1_acisf13391_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sun May 12 13:20:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13391_pi14-548_cl_pass1_tfrozen_src14.csv
[Sun May 12 13:20:44 2013] fullrun_ccd1_acisf13391_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sun May 12 13:20:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13391_pi14-548_cl_pass1_tfrozen_src14.csv
[Sun May 12 13:20:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13391_pi14-548_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13391_pi14-548_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:08:16 2013] Source 10 is offset by -1.135395 and -0.591371 pixels which is larger than
2 X fitted extent = 0.491516 x 2.473756, not incorporating fit results
[Sun May 12 14:08:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:08:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:08:16 2013] Assessing source extent using major
[Sun May 12 14:08:16 2013] Source does appear to be extended
[Sun May 12 14:08:16 2013] Computing asymmetry using major and minor axis, asym = 1.02
[Sun May 12 14:13:36 2013] Writing source region out to fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10_src.reg
[Sun May 12 14:13:36 2013] Extracting stamp from image fullrun_ccd1_acisf13391_pi14-548_cl_sm2.00.img.gz, (929, 779) - (975, 825)
[Sun May 12 14:13:36 2013] Writing fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10.gif
[Sun May 12 14:20:22 2013] Size of ../../acisf13391/products/events/fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10_src.evt.gz[events] = 11 counts
[Sun May 12 14:20:22 2013] Mean chipx,y = (86.73, 781.00)
[Sun May 12 14:20:22 2013] Mean tdetx,y = (4351.00, 4193.73)
[Sun May 12 14:20:22 2013] chipx,y range = (71.00-102.00, 771.00-800.00)
[Sun May 12 14:20:22 2013] Size of ../../acisf13391/products/events/fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 7 counts
[Sun May 12 14:20:23 2013] Not generating rmf since there are only 10 counts
[Sun May 12 14:20:23 2013] arf not found, will run specextract
[Sun May 12 14:20:48 2013] ../../acisf13391/products/spectra/fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10.warf not found
[Sun May 12 14:20:48 2013] ../../acisf13391/products/spectra/fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10.wrmf not found
[Sun May 12 14:20:48 2013] Removal of ../../acisf13391/products/spectra/fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10.soff failed
[Sun May 12 14:22:35 2013] Spectrum 10 has only 10 counts, deleting rmf
[Sun May 12 14:22:35 2013] 191.937
[Sun May 12 14:43:54 2013] Updating aperture counts using extracted products
[Sun May 12 14:43:54 2013] Total counts from fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10_src.pi.gz = 11.00
[Sun May 12 14:43:54 2013] Total counts from fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10_bgd.pi.gz = 7.00
[Sun May 12 14:43:54 2013] Got source and background scale factors 0.000001, 0.000009
[Sun May 12 14:43:54 2013] User source parameters:
  Position = (952.3, 801.9) = 1 3 7.32 -22 15 29.1
  Extent = 0.5" x 0.5", rotation angle = 59
  Source aperture counts = 10.4 +/- 4.4
  Background aperture counts = 0.6
  Rate = 0.0002 +/- 0.0001

[Sun May 12 14:43:54 2013] Updating counts from extracted products
[Sun May 12 14:43:54 2013] Set source signif. to 10.42/0.76 = 13.62
[Sun May 12 14:43:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 14:43:55 2013] Using photon index=1.80, rate=0.000224, arf fullrun_ccd1_acisf13391_pi14-548_pass1_cl_src10.arf
[Sun May 12 14:43:55 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 14:43:55 2013] Updating source flux to 2.8e-15
[Sun May 12 14:44:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting