[Fri Jul 12 16:56:19 2013] Detection parameters:
  Position = (1210.4, 470.2) = 10 9 2.31 11 33 39.8
  Extent = 3.0" x 2.6", rotation angle = 156 degrees
  Source counts = 55.1 +/- 10.4
  Background counts = 52.9
  Rate = 0.001 +/- 0.0003

[Fri Jul 12 16:56:19 2013] Off-axis axis estimate = 12.19'
[Fri Jul 12 18:28:14 2013] Using EEF radius (= 6.64 ")to estimate initial spatial extent for simple fitting
[Fri Jul 12 18:28:14 2013] Initial guess for spatial extent in simple fitting = 6.64"
[Fri Jul 12 18:28:14 2013] source mask rpix=13.5, npix_max = 782, mask sum = 784, frac = 1.001
[Fri Jul 12 18:28:14 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 6.64"
[Fri Jul 12 18:49:23 2013] fullrun_ccd6_acisf13390_pi14-548_cl_pass0_src3.ximg exists
[Fri Jul 12 18:49:23 2013] fullrun_ccd6_acisf13390_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Jul 12 18:49:23 2013] Fit fullrun_ccd6_acisf13390_pi14-548_cl_pass0_src3 appears to have run properly
[Fri Jul 12 18:49:23 2013] fullrun_ccd6_acisf13390_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 12 18:49:23 2013] fullrun_ccd6_acisf13390_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 12 18:49:23 2013] Fit fullrun_ccd6_acisf13390_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 12 18:49:34 2013] Spatial fit model total counts = 133.290000, observed total counts = 134.000000
[Fri Jul 12 18:49:34 2013] Offset between fit and detection position for source 2 = 6.810135 pixels
[Fri Jul 12 18:49:34 2013] 132.939700 total counts/ 68.832400 bgd. counts: snr = 7.727002
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 6.810135 pixels
  Position = (1216.6, 467.2) = 10 9 2.12 11 33 38.0
  Extent = 13.3 (13.3-26.5)" x 4.6 (3.2-7.2)", rotation angle = 56 (43-71) degrees
  Source counts = 64.1 +/- 11.5
  Background counts = 68.8
  Rate = 0.002 +/- 0.0003
[Fri Jul 12 18:49:34 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 18:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 18:49:34 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 18:49:34 2013] Source does appear to be extended
[Fri Jul 12 18:49:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.84
[Fri Jul 12 18:49:34 2013] Source is asymmetric
[Fri Jul 12 20:14:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 12 20:14:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 12 20:14:39 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Fri Jul 12 20:14:39 2013] source mask rpix=18.1, npix_max = 1390, mask sum = 1369, frac = 0.985
[Fri Jul 12 20:14:39 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.93"
[Fri Jul 12 20:42:20 2013] fullrun_ccd6_acisf13390_pi14-548_cl_pass1_src3.ximg exists
[Fri Jul 12 20:42:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13390_pi14-548_cl_pass1_src3.csv
[Fri Jul 12 20:42:20 2013] fullrun_ccd6_acisf13390_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Jul 12 20:42:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13390_pi14-548_cl_pass1_src3.csv
[Fri Jul 12 20:42:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13390_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13390_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 20:42:20 2013] fullrun_ccd6_acisf13390_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 12 20:42:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13390_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Jul 12 20:42:20 2013] fullrun_ccd6_acisf13390_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 12 20:42:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13390_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Jul 12 20:42:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13390_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13390_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 20:42:30 2013] Warning, spatial fit 3 centroid is now closest to src. 1
[Fri Jul 12 20:42:30 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 20:42:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 20:42:30 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 20:42:30 2013] Source does appear to be extended
[Fri Jul 12 20:42:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.84
[Fri Jul 12 20:42:30 2013] Source is asymmetric
[Fri Jul 12 21:21:13 2013] Writing source region out to fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2_src.reg
[Fri Jul 12 21:21:13 2013] Extracting stamp from image fullrun_ccd6_acisf13390_pi14-548_cl_sm2.00.img.gz, (609, 0) - (1319, 1074)
[Fri Jul 12 21:21:13 2013] Writing fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2.gif
[Fri Jul 12 21:22:30 2013] Size of ../../acisf13390/products/events/fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2_src.evt.gz[events] = 147 counts
[Fri Jul 12 21:22:30 2013] Mean chipx,y = (121.80, 977.07)
[Fri Jul 12 21:22:30 2013] Mean tdetx,y = (2996.80, 2679.07)
[Fri Jul 12 21:22:30 2013] chipx,y range = (55.00-187.00, 897.00-1022.00)
[Fri Jul 12 21:22:30 2013] Size of ../../acisf13390/products/events/fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1171 counts
[Fri Jul 12 21:22:31 2013] Not generating rmf since there are only 64 counts
[Fri Jul 12 21:22:31 2013] arf not found, will run specextract
[Fri Jul 12 21:23:03 2013] ../../acisf13390/products/spectra/fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2.warf not found
[Fri Jul 12 21:23:03 2013] ../../acisf13390/products/spectra/fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2.wrmf not found
[Fri Jul 12 21:23:03 2013] Removal of ../../acisf13390/products/spectra/fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2.soff failed
[Fri Jul 12 21:23:10 2013] Spectrum 2 has only 64 counts, deleting rmf
[Fri Jul 12 21:23:10 2013] 142.959
[Fri Jul 12 21:23:23 2013] Updating aperture counts using extracted products
[Fri Jul 12 21:23:23 2013] Total counts from fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2_src.pi.gz = 147.00
[Fri Jul 12 21:23:23 2013] Total counts from fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2_bgd.pi.gz = 1171.00
[Fri Jul 12 21:23:23 2013] Got source and background scale factors 0.000188, 0.006188
[Fri Jul 12 21:23:23 2013] User source parameters:
  Position = (1216.6, 467.2) = 10 9 2.12 11 33 38.0
  Extent = 13.3 (13.3-26.5)" x 4.6 (3.2-7.2)", rotation angle = 56 (43-71) degrees
  Source aperture counts = 111.4 +/- 13.2
  Background aperture counts = 35.6
  Rate = 0.003 +/- 0.0003

[Fri Jul 12 21:23:23 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 21:23:23 2013] Using photon index=1.80, rate=0.00166, arf fullrun_ccd6_acisf13390_pi14-548_pass1_cl_src2.arf
[Fri Jul 12 21:23:23 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 12 21:23:23 2013] Updating source flux to 2.6e-14
[Fri Jul 12 21:23:39 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting