[Fri Jul 12 16:55:48 2013] Detection parameters:
  Position = (670.4, 727.6) = 10 8 52.11 11 49 3.9
  Extent = 0.7" x 0.5", rotation angle = 133 degrees
  Source counts = 12.3 +/- 3.7
  Background counts = 1.7
  Rate = 0.0003 +/- 0.0001

[Fri Jul 12 16:55:48 2013] Off-axis axis estimate = 4.65'
[Fri Jul 12 17:53:55 2013] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Fri Jul 12 17:53:55 2013] Initial guess for spatial extent in simple fitting = 1.04"
[Fri Jul 12 17:53:55 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.908
[Fri Jul 12 17:53:55 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 1.04"
[Fri Jul 12 18:28:14 2013] fullrun_ccd3_acisf13390_pi14-548_cl_pass0_src25.ximg exists
[Fri Jul 12 18:28:14 2013] fullrun_ccd3_acisf13390_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Jul 12 18:28:14 2013] Fit fullrun_ccd3_acisf13390_pi14-548_cl_pass0_src25 appears to have run properly
[Fri Jul 12 18:28:14 2013] fullrun_ccd3_acisf13390_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Jul 12 18:28:14 2013] fullrun_ccd3_acisf13390_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jul 12 18:28:14 2013] Fit fullrun_ccd3_acisf13390_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Jul 12 18:49:34 2013] Spatial fit model total counts = 18.814000, observed total counts = 19.000000
[Fri Jul 12 18:49:34 2013] Offset between fit and detection position for source 27 = 1.092816 pixels
[Fri Jul 12 18:49:34 2013] 19.372490 total counts/ 8.732690 bgd. counts: snr = 3.600472
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.092816 pixels
  Position = (670.5, 728.7) = 10 8 52.12 11 49 4.2
  Extent = 0.5 (0.4-1.0)", rotation angle = 0
  Source counts = 10.6 +/- 4.4
  Background counts = 8.7
  Rate = 0.0003 +/- 0.0001
[Fri Jul 12 18:49:34 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 18:49:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 18:49:34 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 18:49:34 2013] Source does appear to be extended
[Fri Jul 12 18:49:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 19:40:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 12 19:40:39 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Fri Jul 12 19:40:39 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.875
[Fri Jul 12 19:40:39 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 0.54"
[Fri Jul 12 20:14:39 2013] fullrun_ccd3_acisf13390_pi14-548_cl_pass1_src25.ximg exists
[Fri Jul 12 20:14:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13390_pi14-548_cl_pass1_src25.csv
[Fri Jul 12 20:14:39 2013] fullrun_ccd3_acisf13390_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Jul 12 20:14:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13390_pi14-548_cl_pass1_src25.csv
[Fri Jul 12 20:14:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13390_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13390_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 20:14:39 2013] fullrun_ccd3_acisf13390_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Jul 12 20:14:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13390_pi14-548_cl_pass1_tfrozen_src25.csv
[Fri Jul 12 20:14:39 2013] fullrun_ccd3_acisf13390_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jul 12 20:14:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13390_pi14-548_cl_pass1_tfrozen_src25.csv
[Fri Jul 12 20:14:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13390_pi14-548_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13390_pi14-548_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 20:42:30 2013] Spatial fit model total counts = 17.768700, observed total counts = 19.000000
[Fri Jul 12 20:42:30 2013] Offset between fit and detection position for source 27 = 0.176025 pixels
[Fri Jul 12 20:42:30 2013] 19.062980 total counts/ 7.509280 bgd. counts: snr = 4.216207
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.176025 pixels
  Position = (670.5, 728.5) = 10 8 52.12 11 49 4.2
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 11.6 +/- 4.4
  Background counts = 7.5
  Rate = 0.0003 +/- 0.0001
[Fri Jul 12 20:42:30 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 20:42:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 20:42:30 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 20:42:30 2013] Source does appear to be extended
[Fri Jul 12 20:42:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 21:03:28 2013] Writing source region out to fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27_src.reg
[Fri Jul 12 21:03:28 2013] Extracting stamp from image fullrun_ccd3_acisf13390_pi14-548_cl_sm2.00.img.gz, (643, 701) - (698, 756)
[Fri Jul 12 21:03:28 2013] Writing fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27.gif
[Fri Jul 12 21:15:27 2013] Size of ../../acisf13390/products/events/fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27_src.evt.gz[events] = 15 counts
[Fri Jul 12 21:15:27 2013] Mean chipx,y = (557.87, 462.73)
[Fri Jul 12 21:15:27 2013] Mean tdetx,y = (4669.27, 3618.87)
[Fri Jul 12 21:15:27 2013] chipx,y range = (537.00-578.00, 447.00-478.00)
[Fri Jul 12 21:15:27 2013] Size of ../../acisf13390/products/events/fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 26 counts
[Fri Jul 12 21:15:28 2013] Not generating rmf since there are only 11 counts
[Fri Jul 12 21:15:28 2013] arf not found, will run specextract
[Fri Jul 12 21:15:51 2013] ../../acisf13390/products/spectra/fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27.warf not found
[Fri Jul 12 21:15:51 2013] ../../acisf13390/products/spectra/fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27.wrmf not found
[Fri Jul 12 21:15:51 2013] Removal of ../../acisf13390/products/spectra/fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27.soff failed
[Fri Jul 12 21:21:13 2013] Spectrum 27 has only 12 counts, deleting rmf
[Fri Jul 12 21:21:13 2013] 189.596
[Fri Jul 12 21:23:21 2013] Updating aperture counts using extracted products
[Fri Jul 12 21:23:21 2013] Total counts from fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27_src.pi.gz = 15.00
[Fri Jul 12 21:23:21 2013] Total counts from fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27_bgd.pi.gz = 26.00
[Fri Jul 12 21:23:21 2013] Got source and background scale factors 0.000001, 0.000013
[Fri Jul 12 21:23:21 2013] User source parameters:
  Position = (670.5, 728.5) = 10 8 52.12 11 49 4.2
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source aperture counts = 12.8 +/- 5.0
  Background aperture counts = 2.2
  Rate = 0.0003 +/- 0.0001

[Fri Jul 12 21:23:23 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 21:23:23 2013] Using photon index=1.80, rate=0.000299, arf fullrun_ccd3_acisf13390_pi14-548_pass1_cl_src27.arf
[Fri Jul 12 21:23:23 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 12 21:23:23 2013] Updating source flux to 3.7e-15
[Fri Jul 12 21:23:36 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting