[Fri Jul 12 16:55:15 2013] Detection parameters:
  Position = (306.8, 805.3) = 10 8 52.26 11 41 52.3
  Extent = 0.6" x 0.5", rotation angle = 108 degrees
  Source counts = 17.4 +/- 4.2
  Background counts = 0.6
  Rate = 0.0005 +/- 0.0001

[Fri Jul 12 16:55:15 2013] Off-axis axis estimate = 3.75'
[Fri Jul 12 17:37:46 2013] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Fri Jul 12 17:37:46 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Fri Jul 12 17:37:46 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959
[Fri Jul 12 17:37:46 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.76"
[Fri Jul 12 17:53:55 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src7.ximg exists
[Fri Jul 12 17:53:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src7.csv
[Fri Jul 12 17:53:55 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Jul 12 17:53:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src7.csv
[Fri Jul 12 17:53:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 17:53:55 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Jul 12 17:53:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src7.csv
[Fri Jul 12 17:53:55 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jul 12 17:53:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src7.csv
[Fri Jul 12 17:53:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 18:49:30 2013] Spatial fit model total counts = 16.981500, observed total counts = 20.000000
[Fri Jul 12 18:49:30 2013] Offset between fit and detection position for source 3 = 0.934437 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.934437 pixels
  Position = (307.5, 806.0) = 10 8 52.25 11 41 52.4
  Extent = 0.8 (0.6-1.2)" x 0.4 (0.3-0.5)", rotation angle = 55 (38-74) degrees
  Source counts = 16.7 +/- 4.1
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Jul 12 18:49:30 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 18:49:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 18:49:30 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 18:49:30 2013] Source does appear to be extended
[Fri Jul 12 18:49:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.19
[Fri Jul 12 19:25:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 12 19:25:37 2013] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Jul 12 19:25:37 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.994
[Fri Jul 12 19:25:37 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 0.61"
[Fri Jul 12 19:40:39 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src7.ximg exists
[Fri Jul 12 19:40:39 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Jul 12 19:40:39 2013] Fit fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src7 appears to have run properly
[Fri Jul 12 19:40:39 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Jul 12 19:40:39 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jul 12 19:40:39 2013] Fit fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jul 12 20:42:26 2013] Spatial fit model total counts = 19.762100, observed total counts = 21.000000
[Fri Jul 12 20:42:26 2013] Offset between fit and detection position for source 3 = 0.077966 pixels
[Fri Jul 12 20:42:26 2013] 19.479680 total counts/ 3.099180 bgd. counts: snr = 9.304730
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.077966 pixels
  Position = (307.4, 806.0) = 10 8 52.25 11 41 52.4
  Extent = 0.8 (0.6-1.2)" x 0.4 (0.3-0.5)", rotation angle = 53 (35-76) degrees
  Source counts = 16.4 +/- 4.4
  Background counts = 3.1
  Rate = 0.0004 +/- 0.0001
[Fri Jul 12 20:42:26 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 20:42:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 20:42:26 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 20:42:26 2013] Source does appear to be extended
[Fri Jul 12 20:42:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Fri Jul 12 20:54:58 2013] Writing source region out to fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3_src.reg
[Fri Jul 12 20:54:58 2013] Extracting stamp from image fullrun_ccd2_acisf13390_pi14-548_cl_sm2.00.img.gz, (270, 769) - (345, 843)
[Fri Jul 12 20:54:58 2013] Writing fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3.gif
[Fri Jul 12 20:58:20 2013] Size of ../../acisf13390/products/events/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3_src.evt.gz[events] = 17 counts
[Fri Jul 12 20:58:20 2013] Mean chipx,y = (771.71, 777.06)
[Fri Jul 12 20:58:20 2013] Mean tdetx,y = (3838.06, 3314.29)
[Fri Jul 12 20:58:20 2013] chipx,y range = (759.00-794.00, 763.00-797.00)
[Fri Jul 12 20:58:20 2013] Size of ../../acisf13390/products/events/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 17 counts
[Fri Jul 12 20:58:21 2013] Not generating rmf since there are only 16 counts
[Fri Jul 12 20:58:21 2013] arf not found, will run specextract
[Fri Jul 12 20:58:48 2013] ../../acisf13390/products/spectra/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3.warf not found
[Fri Jul 12 20:58:48 2013] ../../acisf13390/products/spectra/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3.wrmf not found
[Fri Jul 12 20:58:48 2013] Removal of ../../acisf13390/products/spectra/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3.soff failed
[Fri Jul 12 21:03:27 2013] Spectrum 3 has only 16 counts, deleting rmf
[Fri Jul 12 21:03:27 2013] 177.052
[Fri Jul 12 21:23:16 2013] Updating aperture counts using extracted products
[Fri Jul 12 21:23:16 2013] Total counts from fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3_src.pi.gz = 17.00
[Fri Jul 12 21:23:17 2013] Total counts from fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3_bgd.pi.gz = 17.00
[Fri Jul 12 21:23:17 2013] Got source and background scale factors 0.000001, 0.000024
[Fri Jul 12 21:23:17 2013] User source parameters:
  Position = (307.4, 806.0) = 10 8 52.25 11 41 52.4
  Extent = 0.8 (0.6-1.2)" x 0.4 (0.3-0.5)", rotation angle = 53 (35-76) degrees
  Source aperture counts = 16.3 +/- 5.2
  Background aperture counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Fri Jul 12 21:23:18 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 21:23:18 2013] Using photon index=1.80, rate=0.000424, arf fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src3.arf
[Fri Jul 12 21:23:18 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 12 21:23:18 2013] Updating source flux to 5.7e-15
[Fri Jul 12 21:23:33 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting