[Fri Jul 12 16:55:15 2013] Detection parameters:
  Position = (351.3, 784.0) = 10 8 50.77 11 41 41.8
  Extent = 0.6" x 0.5", rotation angle = 159 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.0003 +/- 9e-05

[Fri Jul 12 16:55:15 2013] Off-axis axis estimate = 3.71'
[Fri Jul 12 17:37:46 2013] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Fri Jul 12 17:37:46 2013] Initial guess for spatial extent in simple fitting = 0.75"
[Fri Jul 12 17:37:46 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Fri Jul 12 17:37:46 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 0.75"
[Fri Jul 12 17:53:55 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src14.ximg exists
[Fri Jul 12 17:53:55 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Jul 12 17:53:55 2013] Fit fullrun_ccd2_acisf13390_pi14-548_cl_pass0_src14 appears to have run properly
[Fri Jul 12 17:53:55 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Jul 12 17:53:55 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Jul 12 17:53:55 2013] Fit fullrun_ccd2_acisf13390_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Jul 12 18:49:30 2013] Spatial fit model total counts = 10.564600, observed total counts = 11.000000
[Fri Jul 12 18:49:30 2013] Offset between fit and detection position for source 2 = 0.592092 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.592092 pixels
  Position = (351.7, 784.4) = 10 8 50.77 11 41 41.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 10.6 +/- 3.3
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Fri Jul 12 18:49:30 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 18:49:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 18:49:30 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 18:49:30 2013] Source does appear to be extended
[Fri Jul 12 18:49:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 19:25:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 12 19:25:37 2013] Initial guess for spatial extent in simple fitting = 0.70"
[Fri Jul 12 19:25:37 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.076
[Fri Jul 12 19:25:37 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 0.70"
[Fri Jul 12 19:40:39 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src13.ximg exists
[Fri Jul 12 19:40:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src13.csv
[Fri Jul 12 19:40:39 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Jul 12 19:40:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src13.csv
[Fri Jul 12 19:40:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13390_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 19:40:39 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul 12 19:40:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src13.csv
[Fri Jul 12 19:40:39 2013] fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul 12 19:40:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src13.csv
[Fri Jul 12 19:40:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13390_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 20:42:26 2013] Spatial fit model total counts = 10.733200, observed total counts = 12.000000
[Fri Jul 12 20:42:26 2013] Offset between fit and detection position for source 2 = 0.133460 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.133460 pixels
  Position = (351.8, 784.5) = 10 8 50.77 11 41 41.8
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 11.1 +/- 3.3
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Fri Jul 12 20:42:26 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 20:42:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 20:42:26 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 20:42:26 2013] Source does appear to be extended
[Fri Jul 12 20:42:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 20:54:58 2013] Writing source region out to fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2_src.reg
[Fri Jul 12 20:54:58 2013] Extracting stamp from image fullrun_ccd2_acisf13390_pi14-548_cl_sm2.00.img.gz, (319, 752) - (384, 817)
[Fri Jul 12 20:54:58 2013] Writing fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2.gif
[Fri Jul 12 21:01:38 2013] Size of ../../acisf13390/products/events/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2_src.evt.gz[events] = 11 counts
[Fri Jul 12 21:01:38 2013] Mean chipx,y = (740.91, 748.27)
[Fri Jul 12 21:01:38 2013] Mean tdetx,y = (3809.27, 3345.09)
[Fri Jul 12 21:01:38 2013] chipx,y range = (723.00-761.00, 730.00-763.00)
[Fri Jul 12 21:01:38 2013] Size of ../../acisf13390/products/events/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 5 counts
[Fri Jul 12 21:01:39 2013] Not generating rmf since there are only 11 counts
[Fri Jul 12 21:01:39 2013] arf not found, will run specextract
[Fri Jul 12 21:02:06 2013] ../../acisf13390/products/spectra/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2.warf not found
[Fri Jul 12 21:02:06 2013] ../../acisf13390/products/spectra/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2.wrmf not found
[Fri Jul 12 21:02:06 2013] Removal of ../../acisf13390/products/spectra/fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2.soff failed
[Fri Jul 12 21:03:27 2013] Spectrum 2 has only 11 counts, deleting rmf
[Fri Jul 12 21:03:27 2013] 185.715
[Fri Jul 12 21:23:17 2013] Updating aperture counts using extracted products
[Fri Jul 12 21:23:17 2013] Total counts from fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2_src.pi.gz = 11.00
[Fri Jul 12 21:23:17 2013] Total counts from fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2_bgd.pi.gz = 5.00
[Fri Jul 12 21:23:17 2013] Got source and background scale factors 0.000002, 0.000019
[Fri Jul 12 21:23:17 2013] User source parameters:
  Position = (351.8, 784.5) = 10 8 50.77 11 41 41.8
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source aperture counts = 10.6 +/- 4.4
  Background aperture counts = 0.4
  Rate = 0.0003 +/- 0.0001

[Fri Jul 12 21:23:18 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 21:23:18 2013] Using photon index=1.80, rate=0.000287, arf fullrun_ccd2_acisf13390_pi14-548_pass1_cl_src2.arf
[Fri Jul 12 21:23:18 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 12 21:23:18 2013] Updating source flux to 3.7e-15
[Fri Jul 12 21:23:33 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting