[Fri May 10 06:38:29 2013] Detection parameters:
  Position = (672.7, 486.8) = 3 53 17.14 -74 1 16.8
  Extent = 0.7" x 0.6", rotation angle = 2 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.001 +/- 0.0004

[Fri May 10 06:38:29 2013] Off-axis axis estimate = 3.98'
[Fri May 10 06:48:03 2013] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:48:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 06:48:03 2013] Initial guess for spatial extent in simple fitting = 0.82"
[Fri May 10 06:48:03 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Fri May 10 06:48:03 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.82"
[Fri May 10 06:49:23 2013] fullrun_ccd3_acisf13380_pi14-548_cl_pass0_src1.ximg exists
[Fri May 10 06:49:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13380_pi14-548_cl_pass0_src1.csv
[Fri May 10 06:49:23 2013] fullrun_ccd3_acisf13380_pi14-548_cl_pass0_src1_1.ximg exists
[Fri May 10 06:49:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13380_pi14-548_cl_pass0_src1.csv
[Fri May 10 06:49:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13380_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13380_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:49:23 2013] fullrun_ccd3_acisf13380_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri May 10 06:49:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13380_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May 10 06:49:23 2013] fullrun_ccd3_acisf13380_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 10 06:49:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13380_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May 10 06:49:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13380_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13380_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:49:26 2013] Spatial fit model total counts = 10.262600, observed total counts = 13.000000
[Fri May 10 06:49:26 2013] Offset between fit and detection position for source 1 = 0.599590 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.599590 pixels
  Position = (673.1, 487.2) = 3 53 17.15 -74 1 16.8
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 10.9 +/- 3.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Fri May 10 06:49:26 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:49:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:49:26 2013] Assessing source extent using major axis lower bound
[Fri May 10 06:49:26 2013] Source does appear to be extended
[Fri May 10 06:49:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 06:58:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 06:58:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 06:58:10 2013] Initial guess for spatial extent in simple fitting = 0.98"
[Fri May 10 06:58:10 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Fri May 10 06:58:10 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.98"
[Fri May 10 06:59:19 2013] fullrun_ccd3_acisf13380_pi14-548_cl_pass1_src1.ximg exists
[Fri May 10 06:59:19 2013] fullrun_ccd3_acisf13380_pi14-548_cl_pass1_src1_1.ximg exists
[Fri May 10 06:59:19 2013] Fit fullrun_ccd3_acisf13380_pi14-548_cl_pass1_src1 appears to have run properly
[Fri May 10 06:59:19 2013] fullrun_ccd3_acisf13380_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri May 10 06:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13380_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri May 10 06:59:19 2013] fullrun_ccd3_acisf13380_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 10 06:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13380_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri May 10 06:59:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13380_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13380_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:59:21 2013] Spatial fit model total counts = 11.454400, observed total counts = 13.000000
[Fri May 10 06:59:21 2013] Offset between fit and detection position for source 1 = 0.059629 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.059629 pixels
  Position = (673.1, 487.2) = 3 53 17.15 -74 1 16.8
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Fri May 10 06:59:21 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:59:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:59:21 2013] Assessing source extent using major axis lower bound
[Fri May 10 06:59:21 2013] Source does appear to be extended
[Fri May 10 06:59:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 07:05:59 2013] Writing source region out to fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1_src.reg
[Fri May 10 07:05:59 2013] Extracting stamp from image fullrun_ccd3_acisf13380_pi14-548_cl_sm2.00.img.gz, (632, 446) - (714, 528)
[Fri May 10 07:05:59 2013] Writing fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1.gif
[Fri May 10 07:06:00 2013] Size of ../../acisf13380/products/events/fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1_src.evt.gz[events] = 12 counts
[Fri May 10 07:06:00 2013] Mean chipx,y = (539.75, 656.75)
[Fri May 10 07:06:00 2013] Mean tdetx,y = (4475.25, 3600.75)
[Fri May 10 07:06:00 2013] chipx,y range = (526.00-559.00, 642.00-674.00)
[Fri May 10 07:06:00 2013] Size of ../../acisf13380/products/events/fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 11 counts
[Fri May 10 07:06:01 2013] Not generating rmf since there are only 12 counts
[Fri May 10 07:06:01 2013] arf not found, will run specextract
[Fri May 10 07:06:33 2013] ../../acisf13380/products/spectra/fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1.warf not found
[Fri May 10 07:06:33 2013] ../../acisf13380/products/spectra/fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1.wrmf not found
[Fri May 10 07:06:33 2013] Removal of ../../acisf13380/products/spectra/fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1.soff failed
[Fri May 10 07:06:41 2013] Spectrum 1 has only 12 counts, deleting rmf
[Fri May 10 07:06:41 2013] 183.618
[Fri May 10 07:07:51 2013] Updating aperture counts using extracted products
[Fri May 10 07:07:51 2013] Total counts from fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1_src.pi.gz = 12.00
[Fri May 10 07:07:51 2013] Total counts from fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1_bgd.pi.gz = 11.00
[Fri May 10 07:07:51 2013] Got source and background scale factors 0.000002, 0.000029
[Fri May 10 07:07:51 2013] User source parameters:
  Position = (673.1, 487.2) = 3 53 17.15 -74 1 16.8
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source aperture counts = 11.1 +/- 4.6
  Background aperture counts = 0.9
  Rate = 0.001 +/- 0.0005

[Fri May 10 07:07:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:07:51 2013] Using photon index=1.80, rate=0.00134, arf fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1.arf
[Fri May 10 07:07:51 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 07:07:51 2013] Updating source flux to 1.7e-14
[Fri May 10 07:07:56 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 10 07:07:57 2013] acisf13380/analysis//spectral/fullrun_ccd3_acisf13380_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete