[Sun May 26 22:12:54 2013] Detection parameters: Position = (1088.2, 481.7) = 10 26 21.24 12 44 45.9 Extent = 0.9" x 0.5", rotation angle = 18 degrees Source counts = 13.7 +/- 3.7 Background counts = 0.3 Rate = 0.002 +/- 0.0004 [Sun May 26 22:12:54 2013] Off-axis axis estimate = 4.87' [Sun May 26 22:16:20 2013] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting [Sun May 26 22:16:20 2013] Initial guess for spatial extent in simple fitting = 1.13" [Sun May 26 22:16:20 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.151 [Sun May 26 22:16:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.13" [Sun May 26 22:17:40 2013] fullrun_ccd0_acisf13375_pi14-548_cl_pass0_src1.ximg exists [Sun May 26 22:17:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13375_pi14-548_cl_pass0_src1.csv [Sun May 26 22:17:40 2013] fullrun_ccd0_acisf13375_pi14-548_cl_pass0_src1_1.ximg exists [Sun May 26 22:17:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13375_pi14-548_cl_pass0_src1.csv [Sun May 26 22:17:40 2013] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf13375_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf13375_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 26 22:17:40 2013] fullrun_ccd0_acisf13375_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sun May 26 22:17:40 2013] fullrun_ccd0_acisf13375_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sun May 26 22:17:40 2013] Fit fullrun_ccd0_acisf13375_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sun May 26 22:43:56 2013] Spatial fit model total counts = 14.700200, observed total counts = 16.000000 [Sun May 26 22:43:56 2013] Offset between fit and detection position for source 3 = 0.575307 pixels [Sun May 26 22:43:56 2013] 14.977294 total counts/ 0.417994 bgd. counts: snr = 22.519330 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.575307 pixels Position = (1087.8, 482.1) = 10 26 21.27 12 44 45.8 Extent = 1.3 (1.1-2.2)" x 0.6 (0.4-1.0)", rotation angle = 0 (339-28) degrees Source counts = 14.6 +/- 3.9 Background counts = 0.4 Rate = 0.002 +/- 0.0004 [Sun May 26 22:43:56 2013] Vigneting correction estimate = 1.000000 [Sun May 26 22:43:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 26 22:43:56 2013] Assessing source extent using major axis lower bound [Sun May 26 22:43:56 2013] Source does appear to be extended [Sun May 26 22:43:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08 [Sun May 26 22:44:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 26 22:44:07 2013] Initial guess for spatial extent in simple fitting = 0.95" [Sun May 26 22:44:07 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.054 [Sun May 26 22:44:07 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.95" [Sun May 26 22:45:25 2013] fullrun_ccd0_acisf13375_pi14-548_cl_pass1_src1.ximg exists [Sun May 26 22:45:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13375_pi14-548_cl_pass1_src1.csv [Sun May 26 22:45:25 2013] fullrun_ccd0_acisf13375_pi14-548_cl_pass1_src1_1.ximg exists [Sun May 26 22:45:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13375_pi14-548_cl_pass1_src1.csv [Sun May 26 22:45:25 2013] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf13375_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf13375_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 26 22:45:25 2013] fullrun_ccd0_acisf13375_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Sun May 26 22:45:25 2013] fullrun_ccd0_acisf13375_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Sun May 26 22:45:25 2013] Fit fullrun_ccd0_acisf13375_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Sun May 26 23:07:43 2013] Spatial fit model total counts = 14.379400, observed total counts = 16.000000 [Sun May 26 23:07:43 2013] Offset between fit and detection position for source 3 = 0.119907 pixels Spatial fit parameters: Offset between fit and detection position for source 3 = 0.119907 pixels Position = (1087.7, 482.1) = 10 26 21.28 12 44 45.8 Extent = 1.3 (1.1-1.9)" x 0.6 (0.4-0.9)", rotation angle = 2 (349-23) degrees Source counts = 14.7 +/- 3.8 Background counts = 0.0 Rate = 0.002 +/- 0.0004 [Sun May 26 23:07:43 2013] Vigneting correction estimate = 1.000000 [Sun May 26 23:07:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 26 23:07:43 2013] Assessing source extent using major axis lower bound [Sun May 26 23:07:43 2013] Source does appear to be extended [Sun May 26 23:07:43 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21 [Sun May 26 23:07:54 2013] Writing source region out to fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3_src.reg [Sun May 26 23:07:54 2013] Extracting stamp from image fullrun_ccd0_acisf13375_pi14-548_cl_sm2.00.img.gz, (1027, 422) - (1148, 542) [Sun May 26 23:07:54 2013] Writing fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3.gif [Sun May 26 23:09:02 2013] Size of ../../acisf13375/products/events/fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3_src.evt.gz[events] = 15 counts [Sun May 26 23:09:02 2013] Mean chipx,y = (895.73, 794.07) [Sun May 26 23:09:02 2013] Mean tdetx,y = (3855.07, 4236.27) [Sun May 26 23:09:02 2013] chipx,y range = (886.00-913.00, 784.00-815.00) [Sun May 26 23:09:02 2013] Size of ../../acisf13375/products/events/fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 11 counts [Sun May 26 23:09:03 2013] Not generating rmf since there are only 14 counts [Sun May 26 23:09:03 2013] arf not found, will run specextract [Sun May 26 23:09:28 2013] ../../acisf13375/products/spectra/fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3.warf not found [Sun May 26 23:09:28 2013] ../../acisf13375/products/spectra/fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3.wrmf not found [Sun May 26 23:09:28 2013] Removal of ../../acisf13375/products/spectra/fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3.soff failed [Sun May 26 23:09:35 2013] Spectrum 3 has only 15 counts, deleting rmf [Sun May 26 23:09:35 2013] 189.564 [Sun May 26 23:14:08 2013] Updating aperture counts using extracted products [Sun May 26 23:14:08 2013] Total counts from fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3_src.pi.gz = 15.00 [Sun May 26 23:14:08 2013] Total counts from fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3_bgd.pi.gz = 11.00 [Sun May 26 23:14:08 2013] Got source and background scale factors 0.000002, 0.000064 [Sun May 26 23:14:08 2013] User source parameters: Position = (1087.7, 482.1) = 10 26 21.28 12 44 45.8 Extent = 1.3 (1.1-1.9)" x 0.6 (0.4-0.9)", rotation angle = 2 (349-23) degrees Source aperture counts = 14.6 +/- 5.0 Background aperture counts = 0.4 Rate = 0.002 +/- 0.0006 [Sun May 26 23:14:08 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 26 23:14:08 2013] Using photon index=1.80, rate=0.00164, arf fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3.arf [Sun May 26 23:14:08 2013] Assuming count rate is from the 0.20-8.00 bandpass [Sun May 26 23:14:08 2013] Updating source flux to 2e-14 [Sun May 26 23:14:11 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting [Sun May 26 23:14:12 2013] acisf13375/analysis//spectral/fullrun_ccd0_acisf13375_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete