[Mon May 6 00:32:30 2013] Detection parameters: Position = (741.1, 434.1) = 13 19 54.66 44 57 16.1 Extent = 0.7" x 0.6", rotation angle = 11 degrees Source counts = 10.9 +/- 3.3 Background counts = 0.1 Rate = 0.007 +/- 0.002 [Mon May 6 00:32:30 2013] Off-axis axis estimate = 4.75' [Mon May 6 00:33:34 2013] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting [Mon May 6 00:33:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 00:33:34 2013] Initial guess for spatial extent in simple fitting = 1.08" [Mon May 6 00:33:34 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028 [Mon May 6 00:33:34 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.08" [Mon May 6 00:34:51 2013] fullrun_ccd6_acisf13341_pi14-548_cl_pass0_src1.ximg exists [Mon May 6 00:34:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13341_pi14-548_cl_pass0_src1.csv [Mon May 6 00:34:51 2013] fullrun_ccd6_acisf13341_pi14-548_cl_pass0_src1_1.ximg exists [Mon May 6 00:34:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13341_pi14-548_cl_pass0_src1.csv [Mon May 6 00:34:51 2013] It looks like the fit did not converge You should probably delete fullrun_ccd6_acisf13341_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd6_acisf13341_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 00:34:51 2013] fullrun_ccd6_acisf13341_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Mon May 6 00:34:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13341_pi14-548_cl_pass0_tfrozen_src1.csv [Mon May 6 00:34:51 2013] fullrun_ccd6_acisf13341_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Mon May 6 00:34:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13341_pi14-548_cl_pass0_tfrozen_src1.csv [Mon May 6 00:34:51 2013] It looks like the fit did not converge You should probably delete fullrun_ccd6_acisf13341_pi14-548_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd6_acisf13341_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 00:34:52 2013] Spatial fit model total counts = 13.149300, observed total counts = 15.000000 [Mon May 6 00:34:52 2013] Offset between fit and detection position for source 1 = 0.918557 pixels Spatial fit parameters: Offset between fit and detection position for source 1 = 0.918557 pixels Position = (741.8, 434.7) = 13 19 54.66 44 57 16.1 Extent = 0.9 (0.7-1.2)", rotation angle = 0 Source counts = 12.8 +/- 3.6 Background counts = 0.0 Rate = 0.008 +/- 0.002 [Mon May 6 00:34:52 2013] Vigneting correction estimate = 1.000000 [Mon May 6 00:34:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 00:34:52 2013] Assessing source extent using major axis lower bound [Mon May 6 00:34:52 2013] Source does appear to be extended [Mon May 6 00:34:52 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 00:34:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 6 00:34:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 00:34:56 2013] Initial guess for spatial extent in simple fitting = 0.92" [Mon May 6 00:34:56 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.889 [Mon May 6 00:34:56 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.92" [Mon May 6 00:35:53 2013] fullrun_ccd6_acisf13341_pi14-548_cl_pass1_src1.ximg exists [Mon May 6 00:35:53 2013] fullrun_ccd6_acisf13341_pi14-548_cl_pass1_src1_1.ximg exists [Mon May 6 00:35:53 2013] Fit fullrun_ccd6_acisf13341_pi14-548_cl_pass1_src1 appears to have run properly [Mon May 6 00:35:53 2013] fullrun_ccd6_acisf13341_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Mon May 6 00:35:53 2013] fullrun_ccd6_acisf13341_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Mon May 6 00:35:53 2013] Fit fullrun_ccd6_acisf13341_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Mon May 6 00:35:54 2013] Spatial fit model total counts = 13.869100, observed total counts = 14.000000 [Mon May 6 00:35:54 2013] Offset between fit and detection position for source 1 = 0.260464 pixels Spatial fit parameters: Offset between fit and detection position for source 1 = 0.260464 pixels Position = (741.8, 434.5) = 13 19 54.66 44 57 16.0 Extent = 0.9 (0.7-1.1)", rotation angle = 0 Source counts = 13.9 +/- 3.7 Background counts = 0.0 Rate = 0.009 +/- 0.002 [Mon May 6 00:35:54 2013] Vigneting correction estimate = 1.000000 [Mon May 6 00:35:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 00:35:54 2013] Assessing source extent using major axis lower bound [Mon May 6 00:35:54 2013] Source does appear to be extended [Mon May 6 00:35:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 00:35:59 2013] Writing source region out to fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1_src.reg [Mon May 6 00:35:59 2013] Extracting stamp from image fullrun_ccd6_acisf13341_pi14-548_cl_sm2.00.img.gz, (702, 395) - (781, 474) [Mon May 6 00:35:59 2013] Writing fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1.gif [Mon May 6 00:36:00 2013] Size of ../../acisf13341/products/events/fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1_src.evt.gz[events] = 14 counts [Mon May 6 00:36:00 2013] Mean chipx,y = (677.14, 659.86) [Mon May 6 00:36:00 2013] Mean tdetx,y = (3552.14, 2361.86) [Mon May 6 00:36:00 2013] chipx,y range = (666.00-700.00, 644.00-677.00) [Mon May 6 00:36:00 2013] Size of ../../acisf13341/products/events/fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2 counts [Mon May 6 00:36:01 2013] Not generating rmf since there are only 13 counts [Mon May 6 00:36:01 2013] arf not found, will run specextract [Mon May 6 00:36:35 2013] ../../acisf13341/products/spectra/fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1.warf not found [Mon May 6 00:36:35 2013] ../../acisf13341/products/spectra/fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1.wrmf not found [Mon May 6 00:36:35 2013] Removal of ../../acisf13341/products/spectra/fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1.soff failed [Mon May 6 00:37:48 2013] Spectrum 1 has only 14 counts, deleting rmf [Mon May 6 00:37:48 2013] 191.926 [Mon May 6 00:39:04 2013] Updating aperture counts using extracted products [Mon May 6 00:39:04 2013] Total counts from fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1_src.pi.gz = 14.00 [Mon May 6 00:39:04 2013] Total counts from fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1_bgd.pi.gz = 2.00 [Mon May 6 00:39:04 2013] Got source and background scale factors 0.000002, 0.000027 [Mon May 6 00:39:04 2013] User source parameters: Position = (741.8, 434.5) = 13 19 54.66 44 57 16.0 Extent = 0.9 (0.7-1.1)", rotation angle = 0 Source aperture counts = 13.8 +/- 4.8 Background aperture counts = 0.2 Rate = 0.009 +/- 0.003 [Mon May 6 00:39:04 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 00:39:04 2013] Using photon index=1.80, rate=0.00901, arf fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1.arf [Mon May 6 00:39:04 2013] Assuming count rate is from the 0.20-8.00 bandpass [Mon May 6 00:39:04 2013] Updating source flux to 1e-13 [Mon May 6 00:39:06 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting [Mon May 6 00:39:07 2013] acisf13341/analysis//spectral/fullrun_ccd6_acisf13341_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete